Compatible Add-ons
Daytona TC-806M - Motorcycle Tire Changer, 6 to 24 Inch Rims, 37 Inch Max Wheel
SKU: TC-806M
$2,223.00
Save 2% with ACH / Wire Payment. Call for details
Financing options available
Financing estimates are based on the product price; selected add-ons and delivery services are excluded.
Product highlights
- Three pinned clamping ranges
- Demount tool backs off the rim
- Pedal driven bead breaking
Talk to a tire equipment specialistExpert product and freight support before you order855-498-2147
- Authorized Daytona Lifts Dealer
- Manufacturer Warrantyincluded with purchase
- No Sales Tax Collected Outside PAPA orders include sales tax
With outside clamping from 6 to 24 inches, the Daytona TC-806M motorcycle wheel changer works on tube and tubeless bike tires. It takes rims 3 to 12 inches wide and complete wheels no more than 37 inches across.
A fixed column and rocker arm carry the mount/demount tool, while the bead breaker applies 2,500 kg of force. Compare other wheel ranges in the tire changer collection.
Features
Three pinned clamping ranges
The clamps fit the turntable slides at 6 to 14, 9 to 19, or 14 to 24 inches. Every clamp must be pinned in the same position.
Demount tool backs off the rim
A hand wheel brings the rocker arm toward the rim, and one handle locks the hex shaft. As it locks, the demount tool moves slightly away from the rim. The tool angle starts at a standard 13 inch rim setting and can be repositioned for unusually large or small rims.
Pedal driven bead breaking
Set the tire between the blade and pressing runner, then press the pedal to apply 2,500 kg of force with the built-in motorcycle tire bead breaker. Rotate the tire and repeat the stroke until the bead releases around the rim.
Reverse rotation clears a jam
The turntable runs at 6.5 rpm. Press its pedal for clockwise demounting; if the bead jams at the tool, stop and lift the pedal to run the table counterclockwise until the resistance clears.
Inflation pressure under direct control
The gauge shows tire pressure during inflation, and a deflation button releases air if the pressure climbs too high.
Set air pressure and oil feed at the machine
The air unit sits on the body's right side. Lift and turn the regulator knob to change pressure; a separate screw adjusts the oil feed into the air circuit.
Best For
Motorcycle repair shops
The TC-806M is intended for daily, high-volume motorcycle tire service in repair shops. Its solid construction has a 395 lb machine net weight. The TC-806M and BL-630M cover a motorcycle tire changer and balancer workflow for wheels within both machines' limits.
Custom bike builders
The TC-806M is intended for custom bike builders working with alloy rims and custom finishes.
Specifications
| Outside rim clamping | 6 to 24 in |
|---|---|
| Clamp settings | 6 to 14 in, 9 to 19 in, 14 to 24 in |
| Rim width | 3 to 12 in |
| Max wheel diameter | 37 in |
| Tire types | Tube and tubeless motorcycle tires |
| Bead breaking force | 2,500 kg |
| Turntable speed | 6.5 rpm |
| Space requirement | 44 W x 48 D x 77 H in |
|---|---|
| Net weight | 395 lb |
| Body box | 39 x 30 x 37 in |
| Arm box | 25 x 19 x 13 in |
| Power | 110V / 220V |
|---|---|
| Motor | 1.1 kW |
| Air supply | 8 to 10 bar (116 to 145 psi) |
Installation Requirements
Room around the fixed column
Plan a space 44 in wide, 48 in deep and 77 in high. Leave more than 0.5 m (about 20 in) between the rear and each side of the machine and any wall for airflow and operating room.
Anchor through four base holes
Set the TC-806M on a flat, solid concrete floor and fasten anchor bolts through the four holes in its base frame.
110V or 220V power
The TC-806M has 110V or 220V power supply options. Tell us which service the bay has when ordering, and provide an over-voltage protection device at the electrical connection.
Air at the changer
Supply 8 to 10 bar (116 to 145 psi) at the machine's air connection.
Warranty
Documents
Browse Collections
Questions About This Product?
Our team can help with installation planning, freight coordination, and configuration.
Call (855) 498-2147Frequently Asked Questions
Must I repin the Daytona TC-806M clamps between front and rear wheels?
Only if the two rim diameters cannot share one clamp setting. An 18 inch rear and a 21 inch front both use the 14 to 24 inch setting, so the pins can stay put. A 12 inch rim followed by a 21 inch rim needs a reset.
What routine upkeep does the Daytona TC-806M need?
Drain water and impurities from the air separator daily. Each month, clean and oil the hex shaft, clean and grease the turntable claws and guide rail, check the lubricator oil level, and inspect drive belt tension. The lubricator takes SAE30 oil.
Can the Daytona TC-806M change motorcycle tires with tubes?
Yes. The TC-806M motorcycle tire mounter works with tube and tubeless tires for both mounting and demounting. When demounting a tube tire, keep its valve stem 10 cm to the right of the demount tool and remove the tube before lifting the second bead.
Does a roofed outdoor bay qualify for the Daytona TC-806M?
No, a roofed outdoor bay does not meet the TC-806M's indoor installation and use requirement. The machine operates from 41 to 113 degrees F, and its work area must remain free of flammable gas.
Is the Daytona TC-806M the changer for passenger car wheels?
No. The TC-806M is a dedicated motorcycle tire machine; the TC-880 handles passenger car and light-truck tire service.
Have a question we didn't cover? Call (855) 498-2147 and our team will help.
About the Brand
Daytona Lifts
Garage Supply Guys Frequently Asked Questions
If something's not working out, just let us know. Keep in mind that some items might have a restocking fee. Check the product page for the specifics.
No worries, we've got you covered. We can send replacement parts or arrange for a new delivery. Just make sure to inspect everything when it arrives and give us a heads up right away if something's off.
All the details are at the bottom of our site under Shipping & Return Policy. You'll find everything about returns, freight damage, and any brand-specific rules.
Most larger items like car lifts and heavy equipment ship free, but depending on the brand there might be freight costs. Smaller items almost always have shipping fees via UPS, USPS, FedEx, etc. We'll show you any extra costs before you check out.
Shipping estimates are just that: estimates, and they're not guaranteed. Weather, freight delays, and carrier issues can throw things off, especially with bigger items. If you're on a tight timeline for installation, it's smart to give yourself some wiggle room.
Yep! Once it ships, we'll email you the tracking info so you can keep tabs on your delivery and plan accordingly.
We always send tracking info once your order ships. If it's been more than five business days and you haven't heard anything, just shoot us a message at support@garagesupplyguys.com or hit us up through the Contact Us page. We'll figure out what's going on.
Make sure whatever you're buying will actually fit your space. That means checking ceiling height, floor space, power requirements, and whether freight delivery can even get to your location. Trust us, it's way easier to confirm these details upfront.
Read through the product details carefully, especially for heavy or specialized items. If you're not sure about fit, shipping, installation, or anything else, just ask. We'd rather help you get it right the first time.
You'll get a confirmation email right away once you place your order. For most items like car lifts, parts, and shop tools, we'll have them shipped out within five business days if they're in stock. This goes for all major brands and replacement parts.
We don't offer installation services ourselves, but we can put you in touch with qualified installers in your area who you can work out pricing with directly. We can also handle this for you after your purchase.
Just reach out to us after your purchase and we'll connect you with trusted installers in your area. You can negotiate pricing and scheduling directly with them, or we can help coordinate the whole process for you.
Some items can be installed by experienced DIYers, but larger equipment like car lifts typically require professional installation for safety and warranty reasons. Check the product specifications and manufacturer requirements before deciding.
Yes! We're authorized dealers for all the major brands we carry. This means you get full manufacturer warranties, genuine parts, and proper support. You can always verify our dealer status directly with the manufacturer if you'd like.
It means you're getting the real deal - genuine products with full manufacturer warranties, access to official support, and the peace of mind that comes with buying from a legitimate dealer. No gray market products or void warranties here.