Compatible Add-ons
Daytona LTPF9 - 9,000 lb 2-Post Floorplate Lift with 110-Inch Columns
SKU: LTPF9
$2,679.00
Save 2% with ACH / Wire Payment. Call for details
Financing options available
Financing estimates are based on the product price; selected add-ons and delivery services are excluded.
Product highlights
- Chain-over lift with rope synchronization
- Release both locks from one side
- Arms for mixed general service
Talk to a lift specialistExpert product and freight support before you order855-498-2147
- Authorized Daytona Lifts Dealer
- Manufacturer Warrantyincluded with purchase
- No Sales Tax Collected Outside PAPA orders include sales tax
At 110.0 inches, the Daytona LTPF9 has the shortest columns in Daytona's 2-post line. This 9,000 lb 2-post lift has a floorplate instead of an overhead crossbar. The floorplate and short columns make this a 2-post car lift for low ceilings in a home garage or indoor shop too low for an overhead model, provided the vehicle clears the ceiling at full rise. Its 98.9 inch drive-through width accommodates compact cars through light-duty trucks within the lift's rating.
Wire ropes, the oil line, and the safety release cable cross beneath the floorplate, leaving the area above the columns free of lift structure. Compare other bay arrangements in our 2-post lift collection.
Features
Chain-over lift with rope synchronization
A hydraulic cylinder lifts each carriage through a chain. Wire ropes between the columns synchronize their movement.
Release both locks from one side
The safety locks engage automatically during the rise. One release point disengages the locks on both columns for lowering.
Arms for mixed general service
Three-stage front arms pair with two-stage rear arms. Screw-up pads come standard, along with adapters for SUVs and trucks.
Door and travel protection
Rubber guards cover the columns where doors can open against them, and a height limit switch stops upward travel.
Specifications
| Lift capacity | 9,000 lb |
|---|---|
| Lifting pad height | 4.5 to 74.8 in |
| Arm reach, longer arms | 32.7 to 51.9 in |
| Arm reach, shorter arms | 22.8 to 41.3 in |
| Front arms | Three-stage |
| Rear arms | Two-stage |
| Lifting pads | Screw-up pads, standard truck adapters included |
| Safety locks | Automatic, single-point release |
| Power | 240V, 3 HP, 13 A, single-phase, 60 Hz |
|---|---|
| Drive system | Chain-over hydraulic cylinders |
| Hydraulic oil | About 10 L of AW 46 anti-wear hydraulic oil; 32 grade below 50 degrees F |
| Slide blocks | High-polymer polyethylene |
| Finish | Powder coat |
| Overall height | 110.0 in |
|---|---|
| Overall width at base plates | 131.2 in |
| Width across columns | 124.6 in |
| Width between columns | 110.5 in |
| Drive-through width | 98.9 in |
| Base plate | 14.8 x 16.9 in, 0.6 in thick |
| Concrete | 4 in minimum, reinforced, 3,500 psi, cured 28 days |
|---|---|
| Floor level | Within 3/8 in over the installation area |
| Wall clearance | 1,000 mm (39 in) minimum from the columns |
| Location | Indoor use only, 41 to 104 degrees F |
What's Included
- Columns, main and auxiliary x2
- Lift arms, three-stage front and two-stage rear x4
- Screw-up lifting pads x4
- Standard truck adapters
- Power unit, 240V, 3 HP x1
- Floorplate for the hose and wire ropes x1
- Height limit switch x1
- Rubber door guards
Not Included
- Installation, anchoring, and electrical connection
Installation Requirements
Reinforced concrete for the lift
The supporting surface must be level within 3/8 inch and consist of steel-reinforced concrete cured for 28 days. It needs a minimum 4 inch depth and 3,500 psi strength. Do not install over asphalt or tile.
131.2 inch base-plate span
The posts occupy 131.2 inches across their base plates, with 110.5 inches between columns. Leave 1,000 mm of separation from a column to the nearest wall, roughly 39 inches.
Warranty
Documents
Browse Collections
Questions About This Product?
Our team can help with installation planning, freight coordination, and configuration.
Call (855) 498-2147Frequently Asked Questions
Can the Daytona LTPF9 2-post lift fit under a 10 foot ceiling?
Only if the vehicle clears the ceiling at full rise. The 110.0 inch columns fit below 120 inches, but column height alone does not establish usable lifting room. Pads rise to 74.8 inches; add the vehicle's height above its lift points and check every overhead obstruction.
How close can a Daytona LTPF9 anchor be to a crack?
Keep every anchor at least 6 inches from a crack, slab edge, or expansion joint. If the installation area cannot meet the concrete and anchor requirements, a suitable pad may be poured.
Is the Daytona LTPF9 suitable for an outdoor bay?
No. It is an indoor lift, and its operating ambient temperature must stay between 41 and 104 degrees F.
When does the LTPF12 make more sense than the Daytona LTPF9?
Choose the LTPF12 when the vehicles exceed the LTPF9's 9K rating or its 98.9 inch drive-through opening. The LTPF12 provides 12,000 lb and a 112.0 inch opening, but its columns are 114.0 inches tall.
Does the Daytona LTPF9 plug into an outlet?
No. Its 240V, 3 HP, 13 A, single-phase, 60 Hz supply cable connects directly to the breaker, without a socket. A power switch lets you shut off the lift for maintenance or in an emergency. Consulting a certified electrician for the wiring is recommended.
Have a question we didn't cover? Call (855) 498-2147 and our team will help.
About the Brand
Daytona Lifts
Garage Supply Guys Frequently Asked Questions
If something's not working out, just let us know. Keep in mind that some items might have a restocking fee. Check the product page for the specifics.
No worries, we've got you covered. We can send replacement parts or arrange for a new delivery. Just make sure to inspect everything when it arrives and give us a heads up right away if something's off.
All the details are at the bottom of our site under Shipping & Return Policy. You'll find everything about returns, freight damage, and any brand-specific rules.
Most larger items like car lifts and heavy equipment ship free, but depending on the brand there might be freight costs. Smaller items almost always have shipping fees via UPS, USPS, FedEx, etc. We'll show you any extra costs before you check out.
Shipping estimates are just that: estimates, and they're not guaranteed. Weather, freight delays, and carrier issues can throw things off, especially with bigger items. If you're on a tight timeline for installation, it's smart to give yourself some wiggle room.
Yep! Once it ships, we'll email you the tracking info so you can keep tabs on your delivery and plan accordingly.
We always send tracking info once your order ships. If it's been more than five business days and you haven't heard anything, just shoot us a message at support@garagesupplyguys.com or hit us up through the Contact Us page. We'll figure out what's going on.
Make sure whatever you're buying will actually fit your space. That means checking ceiling height, floor space, power requirements, and whether freight delivery can even get to your location. Trust us, it's way easier to confirm these details upfront.
Read through the product details carefully, especially for heavy or specialized items. If you're not sure about fit, shipping, installation, or anything else, just ask. We'd rather help you get it right the first time.
You'll get a confirmation email right away once you place your order. For most items like car lifts, parts, and shop tools, we'll have them shipped out within five business days if they're in stock. This goes for all major brands and replacement parts.
We don't offer installation services ourselves, but we can put you in touch with qualified installers in your area who you can work out pricing with directly. We can also handle this for you after your purchase.
Just reach out to us after your purchase and we'll connect you with trusted installers in your area. You can negotiate pricing and scheduling directly with them, or we can help coordinate the whole process for you.
Some items can be installed by experienced DIYers, but larger equipment like car lifts typically require professional installation for safety and warranty reasons. Check the product specifications and manufacturer requirements before deciding.
Yes! We're authorized dealers for all the major brands we carry. This means you get full manufacturer warranties, genuine parts, and proper support. You can always verify our dealer status directly with the manufacturer if you'd like.
It means you're getting the real deal - genuine products with full manufacturer warranties, access to official support, and the peace of mind that comes with buying from a legitimate dealer. No gray market products or void warranties here.