Popular Add-ons
BendPak HD-7P Four-Post Lift for Garage - 7,000 lb - Narrow High-Rise
- Authorized Online Dealer direct manufacturer relationship
- No Sales Tax outside PA where applicable
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- Manufacturer Warranty included with purchase
- Questions? +1 (855) 498-2147
BendPak HD-7P 7,000 lb Narrow Four-Post Parking Lift
The BendPak HD-7P is a 7,000 lb capacity narrow four-post lift built for space-constrained garages. At just 100.25" overall width, it saves over 10" compared to standard-width models while delivering full lifting capability. Features 82" rise, 4.5" low-profile runways, and enclosed internal components for weather protection and a clean appearance.
Who It's For
- Home Garage Owners: Double your parking capacity without expanding your footprint. The narrow design fits where standard lifts won't, and the quiet 45 dB operation won't disturb the household.
- Collectors and Enthusiasts: Store classic cars, sports cars, and project vehicles safely off the ground. Low-profile runways accommodate low-clearance vehicles without scraping.
- Commercial Parking Operations: Maximize revenue per square foot. Multiple units stack side-by-side with minimal spacing requirements.
- Dealerships and Storage Facilities: Professional appearance with enclosed components. Protect inventory while maintaining an organized, efficient space.
Key Features
Narrow Design for Tight Spaces
At 100.25" overall width, the HD-7P saves over 10" compared to the standard HD-7W. Width between columns is 90.25" with 76.5" drive-thru clearance. Fits in single-car garages and tight commercial bays where standard four-post lifts won't work, with the same 7,000 lb capacity as wider models.
Low-Profile Runways for Sports Cars
The 4.5" minimum runway height with extended approach ramps eliminates undercarriage scraping. Runway length of 164" accommodates most passenger vehicles. Low-bodied sports cars, race cars, and classic vehicles drive on without damage, and ramps feature non-skid surfaces for safe loading.
Heavy-Duty Aircraft Cable System
Four 3/8" stainless steel aircraft cables, each rated for 14,400 lb, provide collectively over 800% of lift capacity. Dual-hub cable sheaves reduce stress and extend service life. Cables are fully enclosed within the columns, protected from weather, chemicals, and accidental contact.
Multi-Position Automatic Safety Locks
Fifteen locking positions every 4" across 82" of rise. Four independent safety locks engage automatically as the lift rises, with pneumatic release to disengage all locks simultaneously. A secondary slack-cable device provides backup protection, and spring-loaded locks re-engage immediately if lift direction changes during descent.
Enclosed Internal Components
Lifting cables, airlines, safety latches, and sheaves are all contained within the columns, protecting components from weather, chemicals, and physical damage. Clean, professional appearance suitable for showrooms, homes, and commercial facilities. Side-by-side installations won't risk cable contact or component interference.
Electric-Hydraulic Power System
Single hydraulic cylinder mounted under the runway with integrated electric-hydraulic power unit. Reaches full rise in 35 seconds with easy-to-reach push-button controls. Maintenance-free design with internal anti-sway slider blocks in each column for smooth, stable lifting.
Specifications
| Specification | Value |
|---|---|
| Lifting Capacity | 7,000 lb / 3,175 kg |
| Front/Rear Axle Capacity | 3,500 lb / 1,588 kg each |
| Overall Width | 100.25" / 2,546 mm |
| Overall Length (with ramps) | 200" / 5,080 mm |
| Column Height | 100" / 2,540 mm |
| Width Between Columns | 90.25" / 2,292 mm |
| Drive-Thru Clearance | 76.5" / 1,943 mm |
| Specification | Value |
|---|---|
| Runway Width | 19" / 483 mm |
| Runway Length | 164" / 4,166 mm |
| Width Between Runways | 37.5" / 952 mm |
| Minimum Runway Height | 4.5" / 114 mm |
| Maximum Rise | 82" / 2,083 mm |
| Maximum Lifting Height | 86.5" / 2,197 mm |
| Time to Full Rise | 35 seconds |
| Locking Positions | 15 positions every 4" |
| Load Percentage | Minimum Wheelbase |
|---|---|
| 100% (7,000 lb) | 115" / 2,921 mm |
| 75% (5,250 lb) | 100" / 2,540 mm |
| 50% (3,500 lb) | 85" / 2,159 mm |
| 25% (1,750 lb) | 70" / 1,778 mm |
| Specification | Value |
|---|---|
| Motor | 220 VAC / 60 Hz / 1 Phase |
| Air Supply Required | 3-25 CFM at 50-150 PSI |
| Sound Level | <70 dB (operating), 45 dB (idle) |
Installation Requirements
Concrete Foundation
- Thickness: Minimum 4.25", fully cured (28 days minimum)
- Strength: Minimum 3,000 PSI
- Surface: Flat and level within 3 degrees of slope
- Condition: No cracks or defects within 6" of anchor points
Electrical
- Power: 220 VAC / 60 Hz / Single-phase (other voltages available)
- Circuit: Dedicated breaker required, 25A time-delay fuse recommended
- Disconnect: Main power disconnect switch required within sight of operator
- Installation: Licensed electrician required
Air Supply
- Requirement: Air compressor required for safety lock release
- Specification: 3-25 CFM at 50-150 PSI (do not exceed 150 PSI)
- Note: Air supply is the end-user's responsibility
Space Requirements
- Ceiling Height: Minimum 100" for columns plus vehicle height plus working clearance
- Floor Space: 200" length × 100.25" width (with ramps)
- Multi-Lift Spacing: Minimum 5" between baseplates
- Environment: Indoor use only
Anchoring
- Anchors: 16 wedge anchors included (4 per post)
- Size: 3/4" diameter × 4.75" length
- Torque: 85-95 ft-lb
- Note: Anchoring strongly recommended; required if using rolling bridge jack
Certification Note: Not all BendPak models meet ANSI/ALI ALCTV or ANSI/UL 201 standards. Verify certification status at autolift.org or contact BendPak.
What's Included
- Steel drive-up ramps with non-skid surface
- Tire stops
- Utility rails for optional rolling jack
- 16 wedge anchors
- Installation and operation manual
Optional Accessories: 4-piece caster kit, 4,500 lb rolling bridge jack, aluminum deck panels, rolling drain pan, GoAiR oil-free compressor.
Note: Professional installation recommended. Licensed electrician required for electrical connections. Air compressor required for operation (not included).
Shipping and Delivery
Free shipping to direct shipping points within the 48 contiguous United States. LTL freight delivery with 5-10 business days typical transit time.
Additional Services: Rural/remote area surcharges may apply. Liftgate, residential, and inside delivery available for additional fees.
Receiving: Forklift or equivalent required for unloading. Inspect all crates before signing the Bill of Lading and note any visible damage before the driver leaves.
Damage Claims: Within 15 days for 100% coverage, within 30 days for 50% coverage. No coverage after 30 days.
Warranty
BendPak 5-2-1 Warranty:
- 5 Years: Structural components
- 2 Years: Hydraulic cylinders and power unit
- 1 Year: Operating and electrical components, labor, free parts shipping (continental US)
Requirements: Proper installation per manufacturer's manual, regular maintenance as specified, use of approved replacement parts only. Non-transferable.
Documents
Click to open in a new tab.
Questions About the HD-7P?
Our team can help with installation planning, concrete requirements, and accessories.
Frequently Asked Questions
What is the maximum weight capacity?
7,000 lb total with 3,500 lb front and rear axle ratings. Handles passenger cars, sports cars, SUVs, and light trucks within the weight limit. Note that shorter wheelbase vehicles have reduced capacity per the wheelbase requirements table.
How much narrower is the HD-7P compared to standard models?
The HD-7P saves 10" of overall width compared to the HD-7W. Overall width is 100.25" vs 110.25" for the standard model. Drive-thru clearance is 76.5" vs 86.5".
Can low-clearance sports cars use this lift?
Yes. The 4.5" low-profile runways combined with extended approach ramps allow most sports cars and race cars to drive on without scraping.
Do I need an air compressor?
Yes. An air compressor is required to operate the pneumatic safety lock release. Specification: 3-25 CFM at 50-150 PSI. Do not exceed 150 PSI.
What ceiling height do I need?
Column height is 100" (8 ft 4 in). Add vehicle height plus working clearance. For a typical 5 ft tall vehicle, plan for at least 160-170" (13-14 ft) total ceiling height.
Can I install this lift outdoors?
No. BendPak specifies indoor installation only. Extended outdoor exposure voids the warranty.
Can I move the lift after installation?
Yes, with the optional caster kit. The 4-piece caster kit allows repositioning with or without a vehicle on the lift. Casters are for temporary repositioning only.
What electrical power is required?
Standard configuration is 220 VAC / 60 Hz / single-phase. Other voltages available upon request. Dedicated circuit with time-delay fuse (25A recommended) and main power disconnect required. Licensed electrician installation required.
Is the HD-7P ALI certified?
Not all BendPak models meet ANSI/ALI ALCTV standards. Check autolift.org for current certification status.
What warranty coverage is included?
BendPak 5-2-1 warranty: 5 years structural, 2 years hydraulics/power unit, 1 year electrical/operating components, labor, and free parts shipping (continental US).
What maintenance is required?
Daily: Clean lift, inspect cables and locks. Monthly: Check fluid levels, lubricate posts and cables, inspect labels. Quarterly: Lubricate sheaves and bearings, inspect wire rope condition.
Do I need a forklift for delivery?
Yes. Heavy freight requires forklift or equivalent for unloading. Carriers do not provide unloading assistance. Liftgate service available for additional fee.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals including styrene and vinyl chloride, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.p65warnings.ca.gov.
About the Brand
BendPak
