Popular Add-ons
ROTARY | XA12 | 12K Alignment Scissor Lift w/ 2-Rolling Jack (6K)
ROTARY | XA12 | 12K Alignment Scissor Lift w/ 2-Rolling Jack (6K)
The Rotary XA12 Alignment Scissor Lift is a versatile solution for automotive service centers, offering a substantial 12,000-pound lifting capacity. Its extensive four-wheel alignment wheelbase range, accommodating vehicles from 78 to 164 inches, makes it suitable for a wide variety of cars and trucks.
XA12 Features
Small Footprint Rotary's
XA12 is designed particularly for shops with smaller bays. It's the perfect solution for performing alignments when bay space is limited. In fact, this model has the smallest alignment system footprint in the market when paired with the Rotary tower-free aligner. The recommended minimum bay size is 13' x 28'.
Large Alignment Base Range
The Rotary XA12 has the most extensive four- wheel alignment range under 12,000 lb. capacity. It handles 78" to 164" wheelbase measurements and performs alignments on a broader range of vehicles than competitor lifts.
Open-Front & Rear Runways
Our runways are not connected in the front or the rear. This open design eliminates cross-beam obstruction, providing easier access for under- vehicle repairs and adjustments.
Moveable Radius Guages
Filler plates can be easily moved to adjust the position of the radius gauge. This allows you to quickly and easily configure runways for short and long wheelbases, accommodating a wide range of four-wheel alignments.
Hinged Ramp with Ramp Chock
Rotary's hinged ramps drop down when the lift is raised. This important feature eliminates any obstruction of floor-mounted ramps, increasing floor space when the lift is up. These hinged ramps also make the lift faster and safer for technicians.
Wide Runways
Accommodate a broader range of vehicles with our 24.5" width runway, which is 2.5" wider than our leading competitor.
XA12 Specifications
| Specification | XA12 |
|---|---|
| Lift Type | Alignment Scissor Lift |
| Lifting Capacity | 12,000 lbs (Main Lift) |
| Rolling Jack Capacity | 6,000 lbs (Each Rolling Jack) |
| Lift Platform Length | 194" (Overall) |
| Alignment Capabilities | Integrated for Precision Alignment |
| Lifting Height (Max) | 73" (Fully Raised) |
| Lowered Height | 10.5" |
| Power Requirements | 208-230V / 1-Phase or 3-Phase, 60Hz |
| Runway Width | 24" |
| Total Width | 91" |
| Hydraulic System | Dual Hydraulic Cylinders |
| Control System | Push Button Operated |
| Safety Features | Multi-Position Locks, Non-Slip Platforms |
| Rolling Jacks | Two Included (6,000 lbs each) |
| Finish | Powder-Coated for Durability |
| Warranty | 1-Year Parts and Labor |
About the Brand