Popular Add-ons
ROTARY SPO10-FA-TRIO 10K Two-Post Symmetrical Lift w/ TRIO Arm & Flip-Up Adapter
- Authorized Online Dealer direct manufacturer relationship
- No Sales Tax outside PA where applicable
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- Manufacturer Warranty included with purchase
- Questions? +1 (855) 498-2147
Rotary SPO10-FA-TRIO - 10,000 lb ALI Gold Certified Symmetrical Two-Post Lift
The Rotary SPO10-FA-TRIO delivers 10,000 lb capacity in a symmetrical two-post configuration, engineered for professional automotive service environments. Featuring the patented TRIO three-stage arm system with flip-up adapters, 102.5 inch drive-thru clearance, and Rotary's Double-S single-piece column design, this lift handles passenger cars, light trucks, SUVs, and vans in a standard 12 ft x 24 ft service bay.
Key Features & Benefits
TRIO Three-Stage Arm System
The patented TRIO design delivers three stages of reach within a two-piece arm assembly, providing an extended adapter positioning range of 31 to 54 inches. This configuration allows technicians to spot diverse vehicle pickup points across compact cars, full-size trucks, and everything in between without swapping arm assemblies.
Traditional two-stage arm systems offer 15-20 inches of adjustment range, limiting their versatility when servicing mixed vehicle fleets. The TRIO system addresses this constraint by nearly tripling the available reach while keeping individual arm components lighter and easier to manipulate than conventional three-piece designs.
This enables faster vehicle positioning and reduces the need for supplemental adapter kits. Technicians can service a compact sedan followed by a full-size pickup without arm reconfiguration, improving bay throughput during high-volume service days.
Symmetrical Column Configuration with 102.5-Inch Drive-Thru
The true symmetrical design positions both columns equidistant from the vehicle centerline, maximizing column-to-column clearance at 102.5 inches. This drive-thru width accommodates wider trucks and full-size vans that would otherwise require asymmetric positioning or column repositioning.
Shops servicing cargo vans, extended cab pickups, and commercial fleet vehicles benefit from the increased clearance. The symmetrical configuration also maintains full door opening access on both sides of the vehicle during service, eliminating the door swing restrictions common with asymmetric designs.
This improves workflow efficiency when technicians need to access both sides of a vehicle simultaneously, such as during brake service, suspension work, or interior-related repairs that require door access.
Flip-Up Adapter Versatility
The FA three-position flip-up adapters lock into multiple angles to contact varying pickup point geometries. Each adapter features three lockable positions that adjust to manufacturer-specified lift points on both unibody and body-on-frame vehicles without requiring separate adapter sets.
Vehicle manufacturers specify different pickup point angles and depths across their model lines. Traditional fixed adapters often require supplemental stackable blocks or dedicated adapter sets for each vehicle type. The flip-up design consolidates this functionality into a single integrated adapter.
This reduces adapter inventory requirements and eliminates time spent searching for and swapping adapter components between vehicles. The locking mechanism ensures each position is secured during lift operation.
Patented Double-S Column Design
Rotary's patented Double-S single-piece column construction (US Patent No. 5,009,287) provides structural rigidity through its distinctive cross-sectional geometry. The column incorporates self-lubricating UHMW slider blocks that eliminate metal-to-metal contact between the carriage and column during operation.
Traditional welded column designs create stress concentration points at weld joints. The single-piece Double-S construction distributes load forces across the entire column profile, reducing fatigue points that lead to structural degradation over time.
This enables consistent carriage travel throughout the lift's service life. The UHMW slider blocks require no external lubrication and resist wear from repeated cycling, reducing maintenance intervals and extending operational lifespan.
ALI Gold Certification & Safety Systems
The SPO10-FA-TRIO carries ALI Gold Certification with third-party testing by ETL, verifying compliance with ANSI/ALI ALCTV-2011 safety and performance standards. The lift includes automatic arm restraint engagement, a single-point lock release system, and a padded overhead shut-off bar.
Industry safety standards require lifts to pass 20,000 cycle performance testing before certification. The automatic arm restraint system engages without manual intervention, ensuring arms are secured before each lift cycle. The single-point lock release allows controlled descent from a single operator position.
This reduces the risk of improper arm positioning and provides documented compliance for shop insurance requirements and OSHA workplace safety audits.
Standard 12x24 Bay Compatibility
The lift is engineered to fit standard 12 ft x 24 ft service bays with a minimum 12 ft ceiling height. The overall width of 11 ft 5-1/2 inches and overall height of 11 ft 8-1/2 inches leave clearance margins within typical bay dimensions without requiring structural modifications.
Many high-capacity lifts require expanded bay footprints or raised ceiling heights that involve costly facility modifications. The SPO10-FA-TRIO's dimensional envelope fits existing bay infrastructure common in independent repair shops, dealership service departments, and fleet maintenance facilities.
This eliminates pre-installation construction costs and allows direct replacement of existing lifts without bay reconfiguration, reducing total project timeline and expense.
Applications & Use Cases
- Independent Repair Shops: General automotive service for passenger cars, light trucks, and SUVs requiring undercar access for brake, suspension, exhaust, and drivetrain repairs.
- Dealership Service Departments: Warranty service and maintenance operations across mixed vehicle fleets including compact cars, full-size sedans, crossovers, and light-duty trucks.
- Fleet Maintenance Facilities: Service operations for commercial fleet vehicles including cargo vans, passenger vans, and Class 1-3 pickup trucks used in delivery and service applications.
- Tire Service Centers: Wheel and tire service requiring rapid vehicle positioning and full undercar access for rotation, alignment preparation, and brake inspections.
- Unibody & Body-on-Frame Vehicles: Compatible with both construction types using flip-up adapter positioning for manufacturer-specified lift points.
Technical Specifications
| Specification | Value |
|---|---|
| Maximum Capacity | 10,000 lb |
| Rise (with FA Adapters) | 78-1/4 in |
| Time to Full Rise | 45 seconds |
| Time to Full Descent | 40 seconds |
| Motor | 2 HP |
| Specification | Value |
|---|---|
| Overall Height | 11 ft 8-1/2 in (140.5 in) |
| Overall Width | 11 ft 5-1/2 in |
| Drive-Thru Clearance | 102.5 in (8 ft 6-1/2 in) |
| Inside Columns | 114.75 in |
| Minimum Bay Size | 12 ft x 24 ft |
| Minimum Ceiling Height | 12 ft |
| Specification | Value |
|---|---|
| Front Arm Reach | 31 in - 54 in |
| Rear Arm Reach | 31 in - 54 in |
| Specification | Value |
|---|---|
| Voltage | 208V - 230V, Single Phase, 60Hz |
| Recommended Circuit | 20A dedicated |
Installation Requirements
Foundation Requirements
- Concrete Compressive Strength: 3,000 PSI minimum
- Concrete Thickness: 4-1/4 in minimum
- Anchor Embedment: 3-1/4 in minimum
- Surface Type: Do not install on asphalt or unstable surfaces
Clearance Requirements
- Minimum Ceiling Height: 12 ft
- Minimum Bay Size: 12 ft wide x 24 ft long
Electrical Requirements
- Voltage: 208V - 230V, Single Phase, 60Hz
- Circuit: 20A dedicated circuit recommended
Installation Notes
- Unloading Equipment: Forklift with minimum 5,000 lb capacity required for installation
- Permits: Verify local code compliance and permit requirements before installation
Shipping & Delivery
Freight Information
Shipping Method: LTL freight delivery
Estimated Shipping Weight: 1,581 lb
Delivery Requirements
Unloading Equipment: Forklift or equivalent lifting equipment required for unloading. Liftgate service available but may not accommodate full lift weight.
Receiving: Inspect all packages before signing bill of lading. Note any visible damage on BOL before driver departs.
Warranty Coverage
5-1-1 Warranty Program
5 Years - Structural: Columns, carriages, arms, and plungers
1 Year - Functional/Operating Parts: Power units, cylinders, latches, adapters, and controls
1 Year - Labor: Labor coverage for warranty repairs
Warranty Requirements
Eligibility: Per Rotary Limited Lift Warranty Statement for surface lifts in the 30,000 lb class and below
Installation: Installation must be performed following manufacturer installation manual specifications
Ready to Upgrade Your Shop?
Get expert guidance on the right lift for your facility. Our team can help with product selection, installation planning, and technical specifications.
Frequently Asked Questions
What is the lifting capacity of the Rotary SPO10-FA-TRIO?
The SPO10-FA-TRIO has a maximum lifting capacity of 10,000 lb, suitable for passenger cars, light trucks (Class 1-3), SUVs, crossovers, and cargo or passenger vans. The lift is ALI Gold Certified and third-party tested by ETL to ANSI/ALI ALCTV-2011 standards. The symmetrical two-post design provides 78-1/4 inches of rise with flip-up adapters installed, reaching full height in 45 seconds. This capacity handles most vehicles serviced in independent repair shops, dealership service departments, and fleet maintenance facilities.
What is included with the Rotary SPO10-FA-TRIO?
The lift includes two symmetrical columns with patented Double-S design, four TRIO three-stage swing arms in a two-piece configuration, and flip-up adapters with three-position locking for various pickup point angles. The package also includes a complete power unit with 2 HP motor, hydraulic pump, and reservoir. Additional components include equalizer cables and sheave assemblies for synchronized lifting, arm restraint systems for safety, column mounting hardware and anchors, and an overhead assembly with padded shut-off bar for added protection.
What are the concrete requirements for the SPO10-FA-TRIO?
The lift requires a minimum concrete compressive strength of 3,000 PSI with a minimum slab thickness of 4-1/4 inches. Anchor embedment depth must be at least 3-1/4 inches to ensure proper load distribution and stability. The lift must not be installed on asphalt or unstable surfaces as these cannot support the operational loads. A forklift with minimum 5,000 lb capacity is required during installation. Verify local building codes and permit requirements before beginning installation work.
What is the drive-thru clearance of the SPO10-FA-TRIO?
The symmetrical column configuration provides 102.5 inches (8 ft 6-1/2 in) of drive-thru clearance between columns. This accommodates wider trucks, full-size vans, and extended cab pickups while maintaining full door opening access on both sides during service. The inside column measurement is 114.75 inches, and the overall width is 11 ft 5-1/2 inches, fitting standard 12 ft wide service bays.
What are the minimum bay size and ceiling height requirements?
The SPO10-FA-TRIO requires a minimum bay size of 12 ft wide by 24 ft long with a minimum ceiling height of 12 ft. The lift's overall height is 11 ft 8-1/2 inches (140.5 inches) and overall width is 11 ft 5-1/2 inches, providing adequate clearance within standard service bay dimensions. This sizing allows installation in most existing automotive service facilities without structural modifications, making it suitable for retrofitting older shops or equipping new construction with standard bay layouts.
What is the arm reach range on the TRIO arm system?
Both front and rear TRIO arms provide a reach range of 31 to 54 inches, delivering 23 inches of total adjustment. This extended range accommodates diverse vehicle pickup points across compact cars to full-size trucks without requiring arm reconfiguration or supplemental adapter sets. The patented three-stage design achieves this range within a lighter two-piece arm assembly that is easier to manipulate than conventional three-piece designs.
What warranty coverage does the SPO10-FA-TRIO include?
The lift includes a 5-year structural warranty covering columns, carriages, arms, and plungers. Functional and operating parts including power units, cylinders, latches, adapters, and controls are covered for 1 year. Labor coverage is also included for 1 year per Rotary's Limited Lift Warranty Statement for surface lifts in the 30,000 lb class and below. The 5-year structural coverage exceeds typical industry standards for two-post lifts.
What electrical requirements does the SPO10-FA-TRIO need?
The lift operates on 208V-230V, single phase, 60Hz power with a 20A dedicated circuit recommended. The 2 HP motor powers the hydraulic system, delivering a full rise time of 45 seconds and descent time of 40 seconds. A qualified electrician should perform electrical connections following local codes. The power unit includes the motor, hydraulic pump, and reservoir as a complete assembly.
About the Brand