Katool KT-H105 – Two-Post Lift (10,000 lb, Floorplate)
- Authorized Online Dealer direct manufacturer relationship
- No Sales Tax outside PA where applicable
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- Manufacturer Warranty included with purchase
- Questions? +1 (855) 498-2147
Katool KT-H105 - 10,000 lb CE Certified Two-Post Lift with Base Plate Design
The Katool KT-H105 delivers 10,000 lb lifting capacity in a symmetric arm, base plate configuration engineered for professional automotive service and home garage installations.
Featuring dual hydraulic chain-drive cylinders, 98.4 inches of drive-thru clearance, and CE-certified construction tested at 150% static load capacity, this two-post lift handles passenger vehicles, SUVs, and light trucks up to its rated capacity.
Key Features & Benefits
Base Plate Design for Low-Ceiling Installations
The floorplate column mounting system eliminates overhead crossbars, with an overall height of 110.9 inches (2,818 mm). This enables installation in garages with standard 12-foot ceilings where overhead-style two-post lifts won't fit—no structural modifications required.
Wide Drive-Thru + Long-Reach Arms (Fitment Confidence Before You Buy)
With 98.4" of drive-thru clearance and 110.2" inside column width, the KT-H105 gives you real room to position SUVs and light trucks without threading the needle. Combine that with 29.5"–46" front arm reach and 35.4"–58.2" rear arm reach, and you can match lift points across a wider range of wheelbases and frame layouts—reducing "won't reach" surprises after delivery.
Level Lifting Across Uneven Loads
Uneven vehicle weight is one of the biggest causes of lift instability. The KT-H105 uses a dual-cylinder hydraulic system that raises both columns together, keeping the vehicle level even when weight distribution isn't perfectly balanced. This reduces racking, improves arm contact stability, and provides more predictable lifting on SUVs and trucks with offset centers of gravity.
The system is powered by a 2.2 kW motor (220V single-phase) and uses a chain-synchronized design to maintain column alignment throughout the lift cycle.
Dual-Side Manual Safety Release
Safety release accessible from both sides of the lift, allowing controlled lock disengagement from either column position. Solo technicians can lower vehicles from whichever side they're already working on.
Complete Adapter Set Included
Ships with screw-on lift pads, extension adapters (+100 mm), stackable height adapters (4 pieces, 70 mm each), rubber door protection pads, and complete installation hardware. Handles most vehicle lift point configurations without additional purchases.
Third-Party Safety Certified (CE Tested)
The KT-H105 is CE certified, meaning it meets European third-party safety standards and is tested at 115% dynamic load and 150% static load capacity—documented verification, not manufacturer self-claims.
While CE is not the same as ALI (ANSI/ALI ALCTV) certification required by some U.S. commercial insurers, it does provide independently verified load and safety testing.
Applications & Use Cases
- General Mechanical Service: Oil changes, brake work, suspension repairs, exhaust system service, and drivetrain maintenance on vehicles within the 10,000 lb capacity rating.
- Passenger Vehicles: Sedans, coupes, hatchbacks, and compact cars with standard lift point configurations accommodated by the included adapter set.
- SUVs and Crossovers: Mid-size and full-size SUVs within capacity limits, using extension adapters for higher ground clearance lift points.
- Light-Duty Trucks: Pickup trucks and light commercial vehicles up to 10,000 lb, including half-ton and some three-quarter-ton configurations.
- Home Garage Installations: Well-equipped residential garages with adequate concrete foundations and 12-foot or higher ceiling clearance.
- Vehicle Storage: Long-term vehicle stacking for collectors or seasonal storage applications where floor space optimization is required.
Technical Specifications
All critical fitment dimensions are published below so you can verify vehicle compatibility before ordering.
| Specification | Value |
|---|---|
| Maximum Lifting Capacity | 10,000 lb (4,500 kg) |
| Maximum Lifting Height | 70.8 inches (1,800 mm) |
| Minimum Pad Height | 3.9 inches (100 mm) |
| Drive-Thru Clearance | 98.4 inches (2,500 mm) |
| Specification | Value |
|---|---|
| Overall Height | 110.9 inches (2,818 mm) |
| Overall Width | 140.4 inches (3,565 mm) |
| Outside Column Width | 124.8 inches (3,170 mm) |
| Inside Column Width | 110.2 inches (2,800 mm) |
| Specification | Value |
|---|---|
| Front Arm Reach (Min) | 29.5 inches (750 mm) |
| Front Arm Reach (Max) | 46 inches (1,170 mm) |
| Rear Arm Reach (Min) | 35.4 inches (900 mm) |
| Rear Arm Reach (Max) | 58.2 inches (1,480 mm) |
| Specification | Value |
|---|---|
| Motor Power | 2.2 kW |
| Electrical Requirements | 220VAC / 60Hz / Single-Phase |
| Net Weight | 1,256 lb (570 kg) |
Installation Requirements
Installation & Operations Manual
Download the complete installation and operations manual:
Download Installation Manual (PDF)
The manual includes detailed installation instructions, anchor specifications, electrical wiring diagrams, safety procedures, operational guidelines, and maintenance schedules. Review the complete manual before beginning installation.
Foundation Requirements
- Concrete Thickness: Minimum 5.9 inches (150 mm)
- Concrete Strength: Minimum 3,000 PSI
- Anchor Installation: Installation hardware kit included; proper anchor torque and embedment depth per manufacturer manual required
Power Requirements
- Standard Configuration: 220V / 60Hz / Single-Phase
- Motor Rating: 2.2 kW
- Circuit Requirements: Dedicated circuit recommended; verify amperage requirements with manufacturer documentation
Clearance Requirements
- Ceiling Height: Must exceed 110.9 inches overall lift height plus adequate clearance above lifted vehicle; 12-foot ceiling minimum recommended
- Floor Space: Overall footprint of 140.4 inches width with adequate working clearance on all sides
Installation Notes
- Professional Installation: Installation by qualified personnel following manufacturer installation manual recommended
- Permits: Verify local code compliance and permit requirements before installation
- Inspection: Post-installation inspection and load testing per manufacturer guidelines before placing lift in service
Shipping & Delivery
Freight Coverage
Shipping: Freight shipping to continental United States. Surcharges may apply for remote locations, Alaska, and Hawaii.
Delivery Type: Commercial address delivery standard. Residential delivery may incur additional fees.
Delivery Requirements
Unloading Equipment: Forklift required for unloading. Liftgate service not available due to shipping weight of 1,256 lb (570 kg).
Warehouse Pickup: Pickup available at multiple U.S. warehouse locations including TX, CA, MD, and NC. Contact for current availability and scheduling.
Receiving: Inspect all packages before signing bill of lading. Note any visible damage on BOL before driver departs.
Warranty Coverage
Warranty Terms
1-Year Parts Warranty: All components including cylinders, power units, motors, displays, electronics, and related parts are covered against manufacturing defects. Replacement parts shipped free of charge.
3-Year Structural Warranty: All structural components are covered for 36 months—in addition to the 1-year parts coverage—protecting your investment in the lift frame, columns, and carriage assemblies.
Extended Warranty Available: Optional 2-year extended warranty available for purchase at time of order.
Warranty Eligibility
- Original Purchaser: Warranty is non-transferable and applies only to the original purchaser
- Proof of Purchase: Order number, invoice, or sales record required for claims
- Authorized Purchase: Equipment must be purchased from Katool or an authorized vendor
- Proper Installation: Installation must follow manufacturer specifications
Warranty Exclusions
- Labor costs for installation, removal, or repair are not covered
- Damage from misuse, improper installation, environmental factors, or operation outside manufacturer guidelines
- Do not disassemble equipment prior to claim approval—doing so may void warranty eligibility
Ready to Upgrade Your Shop?
Get expert guidance on the right lift for your facility. Our team can help with product selection, installation planning, and technical specifications.
Frequently Asked Questions
What is the lifting capacity of the Katool KT-H105?
The KT-H105 has a maximum lifting capacity of 10,000 lb (4,500 kg), suitable for passenger vehicles, SUVs, and light-duty trucks. The lift is CE certified with testing verified at 115% dynamic load and 150% static load capacity, providing documented safety margins above the rated capacity. The dual hydraulic chain-drive cylinder system distributes lifting force evenly across both columns for stable, synchronized operation throughout the lift cycle.
What are the concrete requirements for installing the KT-H105?
The KT-H105 requires a minimum concrete thickness of 5.9 inches (150 mm) with a minimum concrete strength of 3,000 PSI. These specifications ensure adequate foundation support for the lift's 10,000 lb capacity rating and the 1,256 lb weight of the lift itself. The base plate design anchors directly to the floor slab, so foundation integrity is critical. Have your concrete tested before installation if thickness or strength is uncertain, and ensure proper anchor embedment depth per the manufacturer installation manual.
What ceiling height do I need for the Katool KT-H105?
The lift has an overall height of 110.9 inches (2,818 mm) at the top of the columns. You need ceiling clearance exceeding this height plus adequate space above your tallest lifted vehicle at maximum lift height of 70.8 inches. A 12-foot ceiling is the recommended minimum for most passenger vehicle and SUV applications. The base plate design eliminates overhead crossbars, making the KT-H105 suitable for facilities where traditional overhead two-post configurations would not fit.
What adapters and accessories are included with the KT-H105?
The KT-H105 includes screw-on lift pads for standard lift points, extension support adapters adding 100 mm of reach, and stackable height adapters (4 pieces at 70 mm each) for vehicles with higher ground clearance. Rubber door opening protection pads prevent damage during service, and a complete installation hardware kit covers anchor bolts and mounting components. This adapter variety handles most passenger vehicle, SUV, and light truck lift point configurations without requiring additional purchases.
What electrical power does the KT-H105 require?
The KT-H105 operates on 220VAC / 60Hz single-phase power and uses a 2.2 kW motor. A dedicated 220V circuit is recommended to prevent voltage drop during startup. Confirm breaker size and wire gauge with a licensed electrician based on your run length and local code. Some dealers offer an optional 110V power unit; contact your dealer if you need that configuration.
Is the Katool KT-H105 ALI certified?
No, the KT-H105 is CE certified but not ALI certified. CE is the European conformity standard requiring third-party verification of safety compliance, while ALI (ANSI/ALI ALCTV) is the North American automotive lift industry standard. The CE certification includes documented testing at 115% dynamic and 150% static load capacity. Some commercial insurance policies, fleet operations, or local jurisdictions may specifically require ALI certification—verify requirements for your application before purchase.
What is the drive-thru clearance on the KT-H105?
The KT-H105 provides 98.4 inches (2,500 mm) of drive-thru clearance between columns, with an inside column width of 110.2 inches (2,800 mm). The symmetric arm configuration offers front arm reach from 29.5 to 46 inches (750-1,170 mm) and rear arm reach from 35.4 to 58.2 inches (900-1,480 mm). These dimensions accommodate most passenger vehicles, SUVs, and light trucks within the lift's 10,000 lb capacity rating without positioning constraints.
Do I need a forklift to receive the KT-H105?
Yes, forklift equipment is required for unloading. The lift ships at 1,256 lb (570 kg) and liftgate service is not available due to the weight. Commercial address delivery is standard, and residential delivery incurs additional fees. If your facility lacks forklift access, warehouse pickup is available at Katool locations in TX, CA, MD, and NC where you can coordinate transport with proper unloading equipment. Inspect all crates for visible damage before signing the bill of lading and note any damage on the paperwork to preserve freight claim eligibility.
What does the warranty cover?
The KT-H105 includes a 1-year parts warranty covering cylinders, power units, motors, displays, electronics, and related components against manufacturing defects—replacement parts are shipped free of charge. Vehicle lifts also receive an additional 3-year structural warranty covering the frame, columns, and carriage assemblies. An optional 2-year extended warranty is available for purchase. Warranty applies to original purchaser only, requires proof of purchase, and does not cover labor costs or damage from misuse or improper installation.
About the Brand
Katool
