Fortisky FTC-1660 Swing Arm Tire Changer 26" Rim 2.0HP w/ Bead Blaster
- Authorized Online Dealer direct manufacturer relationship
- No Sales Tax outside PA where applicable
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- Manufacturer Warranty included with purchase
- Questions? +1 (855) 498-2147
Fortisky FTC-1660 Semi-Automatic Tire Changer: Dual Assist Arm with Bead Blaster
Also searched as: FTC-1660 / Fortisky swing arm tire changer / semi-automatic tire machine / dual assist arm tire changer
The Fortisky FTC-1660 is a semi-automatic swing arm tire changer with dual assist arms for faster mounting and demounting. The 2.0HP motor and 186-steel bead breaker cylinder deliver 5,500 lbs of breaking force rated for 600,000+ cycles. Handles 10" to 24" rims with tire diameters up to 41". Includes turbo blast bead seater and rim protection on all contact points.
Who It's For
General Tire Shops
Solid workhorse for everyday passenger car, SUV, and light truck tires. The dual assist arms and self-centering turntable speed up standard tire changes without overcomplicating the workflow.
Shops Adding Tire Service
If you're adding tire work to an existing service bay, the FTC-1660 delivers commercial-grade capability at a lower entry point than fully automatic machines. 110V option simplifies electrical requirements.
Mobile Tire Services
At 485 lbs and with 110V capability, this machine works for mobile operations with proper vehicle setup. Compact 44" x 30" footprint leaves room for other equipment.
Features
Dual Assist Arms
Upper and lower roller arms hold the tire bead in the drop center during mounting. Essential for low-profile and run-flat tires. The swing arm design pushes and pulls, giving more control than traditional single-direction machines.
186-Steel Bead Breaker Cylinder
Delivers 5,500 lbs of force at 10 bar. Rated for 600,000+ cycles. Embedded plastic pad protects wheel finish during bead breaking.
Self-Centering Four-Jaw Turntable
One-piece machined chuck base prevents deformation. Four-jaw linkage provides synchronized movement and automatic centering from outside in. Smooth, quiet operation.
Hard Chrome Working Head
High-frequency quenched and hard chrome plated for strength, toughness, and wear resistance. Shape and angle optimized for run-flat tires. Plastic cover prevents rim contact.
Turbo Blast Bead Seater
Direct-connect design maximizes air volume for seating stubborn beads. Position nozzle under rim lip, open slide valve, done. Handles low-profile and performance tires.
Rim Protection Throughout
Embedded plastic covers on bead breaker blade, turntable claws, and working head. No bare metal contacts the wheel during any operation.
Product Video
Specifications
| Spec | Value |
|---|---|
| Outer Rim Clamping | 10" - 22" |
| Inner Rim Clamping | 12" - 24" |
| Max Tire Diameter | 1040mm (41") |
| Max Tire Width | 380mm (15") |
| Bead Breaker Force (10 bar) | 2500kg (5,512 lbs) |
| Spec | Value |
|---|---|
| Overall Dimensions (L×W×H) | 1120 × 750 × 860mm |
| Overall Dimensions (in) | 44" × 29.5" × 33.9" |
| Net Weight | 220kg (485 lbs) |
| Spec | Value |
|---|---|
| Motor | 2.0HP |
| Power Options | 110V 1-Phase / 220V 3-Phase |
| Operating Air Pressure | 8-10 bar (116-145 PSI) |
| Max Inflation Pressure | 3.5 bar (50 PSI) |
| Noise Level | <70dB(A) |
Installation Requirements
Space and Floor
Machine footprint: 44" × 29.5". Allow clearance for swing arm movement and operator access on all sides. Level floor required. Keep area clean and away from brake lathe debris.
Utilities
Electrical: 110V single-phase or 220V three-phase. 25A circuit breaker required. Air: 8-10 bar (116-145 PSI) shop air supply. Connect via pipe joint on right side of tank.
Before First Use
Verify turntable rotates clockwise when pedal depressed. Test bead breaker extension and retraction. Confirm all four clamps move together. Check swing arm locking mechanism.
Shipping
Ships freight to lower 48 states. Free to commercial address or nearest carrier terminal. Residential, farmland, construction site, and liftgate service available for additional fee. Forklift or pallet jack required for unloading. Inspect for damage before signing delivery receipt. Call +1 (855) 498-2147 with questions.
Warranty
Coverage
1 Year Standard: All operating components. Defective parts repaired or replaced with free shipping.
2 Year Extended Warranty: Available at purchase.
Not covered: Normal wear, abuse, misuse, shipping damage, improper installation, lack of maintenance. Serial number required for claims.
Documentation
Buy the Fortisky FTC-1660
Questions about installation, voltage, or specs?
FAQs
What rim sizes can the FTC-1660 handle?
10" to 22" outer clamping, 12" to 24" inner clamping. Max tire diameter 41", max width 15". Covers most passenger cars, SUVs, and light trucks.
What's the difference between this and the FTC-T8?
The FTC-1660 is semi-automatic with a swing arm design. The FTC-T8 is fully automatic with a leverless center-post system and hydraulic control. FTC-T8 handles larger wheels (up to 30") and offers touchless operation. FTC-1660 is more compact and has a lower price point.
Can it handle run-flat tires?
Yes. The dual assist arms hold beads in the drop center, and the 5,500 lb bead breaker handles stiff run-flat sidewalls. Working head geometry is optimized for run-flats.
110V or 220V?
Both options available. 110V single-phase for standard outlets, 220V three-phase for shops with that infrastructure. Specify at purchase.
What air pressure is required?
8-10 bar (116-145 PSI) operating pressure. Standard shop compressor output. Inflation limited to 50 PSI through the machine.
How does the turbo blast work?
Position the nozzle under the rim lip, push the slide valve forward, and a burst of air seats the bead. Close valve by pulling back. Direct-connect design maximizes air volume.
Will it scratch alloy wheels?
All contact points have embedded plastic protection: bead breaker blade, turntable claws, and working head. Proper technique and lubrication still required.
What maintenance is required?
Clean turntable with diesel regularly. Lubricate clamp slides. Check and refill oil mist device (ISO VG32 oil). Retighten clamp screws after first 20 days. Inspect V-belt tension periodically.
About the Brand
Fortisky
