BENDPAK GP-7LCS Two Post Car Lift, GrandPrix Series, 7000 lb Capacity, 106.5" Overall Height, 58" Lifting Height
View Original GP-7LCS Product Information & Specifications
BendPak GP-7LCS Two-Post Lift Overview
The GP-7LCS was the super-short version of the GrandPrix series, standing at just 8 feet 10 inches tall to fit in garages with ceilings as low as 9 feet. This 7,000 lb capacity two-post lift featured the lowest columns ever found on a permanent two-post lift, making it installable in virtually any garage while still offering an impressive 58 inch rise.
GP-7LCS Key Features
Ultra-Low Ceiling Design
At just 106.5 inches (8'10") overall height, the GP-7LCS was specifically engineered for garages with 9-foot ceilings where no other permanent two-post lift would fit. This game-changing design let average homeowners work on a full-rise lift from the comfort of home.
Super-Slim Column Profile
By placing the hydraulic cylinder overhead instead of in the columns, BendPak significantly reduced column width while maintaining full lifting capability. The slim columns maximized usable garage space without sacrificing the 7,000 lb capacity.
Quadruple Lifting Cable System
The GP-7LCS featured four aircraft-quality lifting cables—twice as many as standard two-post and four-post lifts. Two cables were redundant safety backups, virtually eliminating any risk of uneven lifting or sudden drops when properly maintained.
Single Overhead Hydraulic Cylinder
The single shortened overhead cylinder paired with the quad cable system enabled 2:1 lifting speed—for every inch of cylinder extension, the lift carriage rose 2 inches. This design required less maintenance and provided consistent operation.
Bi-Metric Arm Configuration
Telescoping Low-Pro arms could be angled for either symmetric or asymmetric vehicle loading. This dual-configuration approach let operators choose how to load vehicles based on available space and personal preference.
Automatic Safety Locks
Automatic safety locks engaged at multiple positions throughout the lift stroke, providing secure support without manual engagement. Single-point release operation simplified the lowering process.
GP-7LCS Specifications
| Specification | Value |
|---|---|
| Lifting Capacity | 7,000 lbs (3,175 kg) |
| Max Capacity Per Axle | 3,500 lbs (1,588 kg) |
| Rise | 54 in (1,372 mm) |
| Rise + Pad | 58 in (1,473 mm) |
| Rise + Pad + 63mm Adapter | 66 in (1,676 mm) |
| Minimum Pad Height | 4.5 in (114 mm) |
| Time to Full Rise | ~45 seconds |
| Specification | Value |
|---|---|
| Overall Height | 106.5 in (2,705 mm) |
| Width Overall | 125 in (3,175 mm) |
| Outside Columns | 119.5 in (3,035 mm) |
| Inside Columns | 110 in (2,794 mm) |
| Drive-Thru Clearance | 89.5 in (2,273 mm) |
| Floor to Overhead Switch | 96 in (2,438 mm) |
| Specification | Value |
|---|---|
| Front Arm Reach (Min) | 26 in (660 mm) |
| Front Arm Reach (Max) | 42 in (1,067 mm) |
| Rear Arm Reach (Min) | 26 in (660 mm) |
| Rear Arm Reach (Max) | 42 in (1,067 mm) |
| Specification | Value |
|---|---|
| Motor | 220 VAC / 60 Hz / 1 Ph |
| Noise Level | ~70 dB |
GP-7LCS Documentation (Archive)
Frequently Asked Questions
Why was the GP-7LCS discontinued?
BendPak streamlined the GrandPrix low-ceiling lineup. The GP-9LC now serves as the primary low-ceiling two-post option, offering significantly more rise (70" vs 58"), increased capacity (9,000 lb vs 7,000 lb), and a floorplate design that eliminates overhead obstructions entirely.
What is the direct replacement for the GP-7LCS?
The GrandPrix GP-9LC is the recommended replacement. While slightly taller at 109.5 inches (vs 106.5 inches), it still fits most 9-10 foot ceiling garages and offers substantially more lifting height (70" vs 58") and capacity (9,000 lb vs 7,000 lb).
Will the GP-9LC fit in my 9-foot ceiling garage?
The GP-9LC is 109.5 inches tall (9'1.5"), which is 3 inches taller than the GP-7LCS. It's designed for 9-10 foot ceiling environments, but measure your exact ceiling height to confirm clearance. The GP-9LC's floorplate design eliminates the overhead crossbar, which may provide more usable clearance than the GP-7LCS despite being slightly taller overall.
Are GP-7LCS replacement parts still available?
BendPak maintains parts support for discontinued models. Contact BendPak directly or an authorized dealer for replacement parts availability and pricing.
What are the main differences between the GP-7LCS and GP-9LC?
Key differences include:
- Capacity: GP-9LC offers 9,000 lb capacity vs 7,000 lb
- Rise: GP-9LC provides 70" rise vs 58" (12 inches more working height)
- Design: GP-9LC uses floorplate design eliminating overhead crossbar
- Height: GP-9LC is 109.5" vs 106.5" (3 inches taller)
- Arms: GP-9LC has triple-telescoping front arms and dual-stage extended rear arms
- Lifting System: GP-9LC uses industrial-grade chain-over design vs overhead cylinder with cables
- Warranty: GP-9LC includes 36-month warranty
Is the GP-7LCS still covered under warranty?
Original warranty coverage applies based on purchase date. Contact BendPak with your lift's serial number for warranty status verification.
Need Help Choosing a Replacement?
Our team can help you find the right GrandPrix lift for your garage. We'll walk you through ceiling requirements, capacity needs, and installation planning.
About the Brand