Compatible Add-ons
Triumph NTO-11A, 11,000 lb Two Post Auto Lift
SKU: NTO-11A
$3,225.00
Save 2% with ACH / Wire Payment. Call for details
Financing options available
Financing estimates are based on the product price; selected add-ons and delivery services are excluded.
Product highlights
- Overhead Design Keeps the Floor Clear
- Electric Safety Cutoff
- Direct Drive Cylinders
Talk to a lift specialist
Expert product and freight support before you order
855-498-2147
- Authorized Triumph Dealerdirect manufacturer relationship
- Manufacturer Warrantyincluded with purchase
- Price Match Guaranteefind it lower and we will beat it
- No Sales Tax Collected Outside PAPA orders include sales tax
The Triumph NTO-11A is an 11,000 lb two post car lift in an overhead configuration, which means the equalization runs across the top beam and the floor between the posts stays completely clear. You get a 108 in drive-thru width, 72 in of lifting height, and open floor to roll transmission jacks and oil drains under the vehicle.
The mechanicals are what you want at this capacity: direct drive hydraulic cylinders with no drive chains to maintain, 3/8 in aircraft grade cables keeping both carriages synchronized, and an overhead electric cutoff that stops the lift before a roof meets the beam. Machined truck adapters ship in the crate, so frame rail pickups are covered without an accessory order.
Measure before you order. The lift stands 145 in overall, wants a minimum 4 in slab at 3,000 PSI, and runs a 3 HP power unit on 220V single phase. Receiving takes machinery too: auto lifts come off the truck by forklift or equivalent, not by hand.
Features
Overhead Design Keeps the Floor Clear
With the crossmember at the top, there is no floor plate between the posts. Tool carts, transmission jacks, and oil drains roll straight under the raised vehicle, and nobody trips over a hump moving around the bay all day.
Electric Safety Cutoff
An overhead mounted switch automatically stops the lift if a vehicle rises too far, preventing contact between the roof and the beam. On a lift that regularly carries tall trucks and vans, that is the difference between a nonevent and bodywork.
Direct Drive Cylinders
Hydraulic cylinders act directly on the carriages, eliminating the drive chains found on some designs. Fewer wear components in the lifting path means less maintenance over the lift's service life and smooth, consistent travel through the full 72 in stroke.
Aircraft Grade Synchronization Cables
3/8 in aircraft size cables tie both carriages together so the two sides rise and fall at the same rate. The vehicle stays level through the whole cycle instead of loading one post harder than the other.
Single Point Lock Release
Safety locks engage automatically on the way up, hands-free. When it is time to come down, one release point disengages both sides, which matters when you are cycling vehicles through the bay all day.
Truck Adapters in the Crate
Large machined truck adapters are included for properly supporting frame rails on pickups and body-on-frame SUVs. Standard pads handle unibody cars, so the one lift covers the whole mixed workload without add-on purchases.
Specifications
| Lifting Capacity | 11,000 lb |
|---|
| Lift Time | 40 seconds |
|---|---|
| Lock Release | Single Point |
| Electric Safety Cutoff | Yes |
| Style | Overhead |
| Overall Height | 145 in |
|---|---|
| Overall Width | 145 in |
| Distance Between Posts | 118 in |
| Drive Thru Width | 108 in |
| Lowered Height | 4.5 in |
| Lifting Height | 72 in |
| Base Plate Size | 18 x 20 in |
| Voltage | 220V |
|---|---|
| Motor | 3 HP |
Installation Requirements
Concrete
Minimum 4 in slab at 3,000 PSI, level and properly cured, with each post anchored through an 18 x 20 in base plate. If your existing floor does not meet spec, address the concrete before the lift arrives.
Electrical
The 3 HP power unit runs on 220V single phase. A dedicated circuit is recommended; have a licensed electrician confirm service and install the outlet.
Ceiling and Footprint
The lift stands 145 in overall and spans 145 in wide, so plan for the structure plus the height of your tallest vehicle raised. Leave working space around the posts for vehicle access and technician movement.
Professional Installation Recommended
Proper anchoring, electrical connection, and safety system calibration are worth doing right the first time. Check local building codes and permit requirements before scheduling the install.
Shipping & Delivery
Warranty
Documents
Questions About This Product?
Our team can help with installation planning, freight coordination, and configuration.
Call (855) 498-2147Frequently Asked Questions
What vehicles can the NTO-11A lift?
The 11,000 lb capacity handles most passenger cars, SUVs, minivans, and light duty pickups, and the included machined truck adapters support frame rail vehicles like full-size trucks. The 108 in drive-thru width takes most standard width vehicles.
How much ceiling height do I need?
The lift itself stands 145 in, roughly 12 feet. Plan for the structure plus the height of your tallest vehicle when raised; for most installations that means 12 to 13 feet of clear ceiling.
What are the concrete requirements?
A minimum 4 in thick slab at 3,000 PSI, properly cured, with each post anchoring through an 18 x 20 in base plate. If your floor falls short, pour or reinforce before installation.
What electrical service does it need?
220V single phase for the 3 HP power unit, with a dedicated circuit recommended. Have a licensed electrician verify your service and install the outlet.
How do I unload the lift when it arrives?
Unloading is your responsibility and lift gate service is not available for auto lifts. You need machinery rated for the full crate weight, such as a forklift, tractor with forks, bobcat, tow truck, or backhoe; terminal pickup with a trailer is the alternative if your site cannot take a semi.
What comes in the crate?
The complete two post structure with overhead beam, 3 HP hydraulic power unit, machined truck adapters, standard lift arm pads, 3/8 in synchronization cables, mounting hardware, and installation instructions. Concrete anchors and the electrical connection are sourced locally.
Have a question we didn't cover? Call (855) 498-2147 and our team will help.
About the Brand
Triumph
Garage Supply Guys Frequently Asked Questions
If something's not working out, just let us know. Keep in mind that some items might have a restocking fee. Check the product page for the specifics.
No worries, we've got you covered. We can send replacement parts or arrange for a new delivery. Just make sure to inspect everything when it arrives and give us a heads up right away if something's off.
All the details are at the bottom of our site under Shipping & Return Policy. You'll find everything about returns, freight damage, and any brand-specific rules.
Most larger items like car lifts and heavy equipment ship free, but depending on the brand there might be freight costs. Smaller items almost always have shipping fees via UPS, USPS, FedEx, etc. We'll show you any extra costs before you check out.
Shipping estimates are just that: estimates, and they're not guaranteed. Weather, freight delays, and carrier issues can throw things off, especially with bigger items. If you're on a tight timeline for installation, it's smart to give yourself some wiggle room.
Yep! Once it ships, we'll email you the tracking info so you can keep tabs on your delivery and plan accordingly.
We always send tracking info once your order ships. If it's been more than five business days and you haven't heard anything, just shoot us a message at support@garagesupplyguys.com or hit us up through the Contact Us page. We'll figure out what's going on.
Make sure whatever you're buying will actually fit your space. That means checking ceiling height, floor space, power requirements, and whether freight delivery can even get to your location. Trust us, it's way easier to confirm these details upfront.
Read through the product details carefully, especially for heavy or specialized items. If you're not sure about fit, shipping, installation, or anything else, just ask. We'd rather help you get it right the first time.
You'll get a confirmation email right away once you place your order. For most items like car lifts, parts, and shop tools, we'll have them shipped out within five business days if they're in stock. This goes for all major brands and replacement parts.
We don't offer installation services ourselves, but we can put you in touch with qualified installers in your area who you can work out pricing with directly. We can also handle this for you after your purchase.
Just reach out to us after your purchase and we'll connect you with trusted installers in your area. You can negotiate pricing and scheduling directly with them, or we can help coordinate the whole process for you.
Some items can be installed by experienced DIYers, but larger equipment like car lifts typically require professional installation for safety and warranty reasons. Check the product specifications and manufacturer requirements before deciding.
Yes! We're authorized dealers for all the major brands we carry. This means you get full manufacturer warranties, genuine parts, and proper support. You can always verify our dealer status directly with the manufacturer if you'd like.
It means you're getting the real deal - genuine products with full manufacturer warranties, access to official support, and the peace of mind that comes with buying from a legitimate dealer. No gray market products or void warranties here.