Compatible Add-ons
Triumph NTO-10A, 10,000 lb Two Post Auto Lift
SKU: NTO-10A
$2,765.00
Save 2% with ACH / Wire Payment. Call for details
Financing options available
Financing estimates are based on the product price; selected add-ons and delivery services are excluded.
Product highlights
- Overhead Routing Keeps the Floor Clear
- Single-Point Lock Release
- Three-Stage Telescoping Arms
Talk to a lift specialist
Expert product and freight support before you order
855-498-2147
- Authorized Triumph Dealerdirect manufacturer relationship
- Manufacturer Warrantyincluded with purchase
- Price Match Guaranteefind it lower and we will beat it
- No Sales Tax Collected Outside PAPA orders include sales tax
The Triumph NTO-10A is a 10,000 lb overhead two post car lift. The crossbar at the top of the columns carries the equalizer cables and hydraulic lines, so the floor between the posts stays completely clear: no plate to roll a transmission jack over, nothing to step across while you work under the vehicle.
Four three-stage telescoping arms reach lift points from compact cars to full-size pickups, and truck adapters are included for frame-rail vehicles with more ground clearance. A single-point lock release lowers the lift from one station, and an electric safety cutoff stops the motor if the carriage reaches maximum height or meets an obstruction. The 3 HP motor on 220V single-phase makes full rise in about 40 seconds.
The trade for the clear floor is ceiling height: the columns and overhead bar top out at 145 in, so measure before you order. If your ceiling is tight, a floor plate lift is the better fit; if you have the height, the open floor is worth it every day.
Features
Overhead Routing Keeps the Floor Clear
Cables, hoses, and power lines run through the overhead bar instead of across the slab. That means no tripping hazard between the posts, unobstructed access to roll tool carts and jacks under the vehicle, and a cleaner working lane around the car.
Single-Point Lock Release
All locks release from one station, so lowering does not require a walk around the columns. On a lift cycled many times a day, that saved lap adds up.
Three-Stage Telescoping Arms
Each of the four arms extends in three stages, covering narrow frame rails on compacts and wide-set lift points on full-size trucks. You position the pads where the manufacturer intends instead of settling for close enough.
10,000 lb Capacity with Truck Adapters Included
The full 10,000 lb rating covers heavy pickups and full-size SUVs, and the included truck adapters add the pad height needed for vehicles with taller ground clearance and frame-rail lift points.
Electric Safety Cutoff
The motor cuts automatically if the lift reaches maximum height or encounters an obstruction. That protects the vehicle roof, the ceiling, and the lift itself from an operator holding the button a beat too long.
40-Second Rise on a 3 HP Motor
The 3 HP power unit on 220V single-phase brings a vehicle to full working height in about 40 seconds, consistent across the load range.
Specifications
| Lifting Capacity | 10,000 lb |
|---|---|
| Truck Adapters | Included |
| Lifting Height | 72 in |
|---|---|
| Lift Time | 40 seconds |
| Lock Release | Single Point |
| Electric Safety Cutoff | Yes |
| Style | Overhead |
| Overall Height | 145 in |
|---|---|
| Overall Width | 133 in |
| Distance Between Posts | 107 in |
| Drive-Thru Width | 96 in |
| Lowered Height | 4.5 in |
| Base Plate Size | 18 x 17 in |
| Voltage | 220V |
|---|---|
| Motor | 3 HP |
Installation Requirements
Concrete and Floor
Anchor into a level, crack-free concrete slab at least 4 in thick with a minimum strength of 3,000 PSI. Allow for the 133 in overall width plus working clearance around the lift. Floor mounting hardware is included.
Electrical
The 3 HP motor runs on 220V single-phase, with a dedicated circuit recommended for consistent performance.
Ceiling Height
The columns and overhead bar stand 145 in tall, just over 12 ft, and that is before considering raised vehicle height. Measure your actual ceiling against 145 in plus clearance; tight-ceiling garages should look at a floor plate design instead.
Installation Notes
Owner installation is possible, but professional installation ensures correct anchor placement and electrical connections. Check local building codes for permit requirements before the work starts.
Shipping & Delivery
Warranty
Documents
Questions About This Product?
Our team can help with installation planning, freight coordination, and configuration.
Call (855) 498-2147Frequently Asked Questions
How much ceiling height does the NTO-10A need?
The overhead bar tops out at 145 in, just over 12 ft, so your ceiling must clear that plus any margin for vehicles at full lift height. Measure your actual ceiling before ordering; if it is under roughly 12.5 ft, consider a floor plate lift instead.
What are the power requirements?
220V single-phase for the 3 HP motor, with a dedicated circuit recommended. The motor takes a vehicle to full height in about 40 seconds.
What are the concrete floor requirements?
A minimum 4 in thick slab rated at least 3,000 PSI, level and free of major cracks where the 18 x 17 in base plates anchor. Floor mounting hardware is included with the lift.
Why choose the overhead design over a floor plate lift?
The overhead bar routes cables, hoses, and power lines above the vehicle, leaving the floor between the posts completely clear. That means no plate to step over, and tool carts and transmission jacks roll under the vehicle unobstructed. The trade is that you need the ceiling height for the 145 in columns.
How wide is the drive-thru?
96 in between the columns at drive-thru, with 107 in between the posts overall. Full-size trucks and wide-body SUVs pass through without difficulty.
How do I unload the lift when it arrives?
You are responsible for unloading, and liftgate service is not available for auto lifts. You need equipment capable of handling the lift's full weight: a forklift, bobcat, tractor with loader, or similar machinery.
Have a question we didn't cover? Call (855) 498-2147 and our team will help.
About the Brand
Triumph
Garage Supply Guys Frequently Asked Questions
If something's not working out, just let us know. Keep in mind that some items might have a restocking fee. Check the product page for the specifics.
No worries, we've got you covered. We can send replacement parts or arrange for a new delivery. Just make sure to inspect everything when it arrives and give us a heads up right away if something's off.
All the details are at the bottom of our site under Shipping & Return Policy. You'll find everything about returns, freight damage, and any brand-specific rules.
Most larger items like car lifts and heavy equipment ship free, but depending on the brand there might be freight costs. Smaller items almost always have shipping fees via UPS, USPS, FedEx, etc. We'll show you any extra costs before you check out.
Shipping estimates are just that: estimates, and they're not guaranteed. Weather, freight delays, and carrier issues can throw things off, especially with bigger items. If you're on a tight timeline for installation, it's smart to give yourself some wiggle room.
Yep! Once it ships, we'll email you the tracking info so you can keep tabs on your delivery and plan accordingly.
We always send tracking info once your order ships. If it's been more than five business days and you haven't heard anything, just shoot us a message at support@garagesupplyguys.com or hit us up through the Contact Us page. We'll figure out what's going on.
Make sure whatever you're buying will actually fit your space. That means checking ceiling height, floor space, power requirements, and whether freight delivery can even get to your location. Trust us, it's way easier to confirm these details upfront.
Read through the product details carefully, especially for heavy or specialized items. If you're not sure about fit, shipping, installation, or anything else, just ask. We'd rather help you get it right the first time.
You'll get a confirmation email right away once you place your order. For most items like car lifts, parts, and shop tools, we'll have them shipped out within five business days if they're in stock. This goes for all major brands and replacement parts.
We don't offer installation services ourselves, but we can put you in touch with qualified installers in your area who you can work out pricing with directly. We can also handle this for you after your purchase.
Just reach out to us after your purchase and we'll connect you with trusted installers in your area. You can negotiate pricing and scheduling directly with them, or we can help coordinate the whole process for you.
Some items can be installed by experienced DIYers, but larger equipment like car lifts typically require professional installation for safety and warranty reasons. Check the product specifications and manufacturer requirements before deciding.
Yes! We're authorized dealers for all the major brands we carry. This means you get full manufacturer warranties, genuine parts, and proper support. You can always verify our dealer status directly with the manufacturer if you'd like.
It means you're getting the real deal - genuine products with full manufacturer warranties, access to official support, and the peace of mind that comes with buying from a legitimate dealer. No gray market products or void warranties here.