Compatible Add-ons
Triumph NOS10000 10,000 lb 4 Post Car Lift
SKU: NOS10000
$4,550.00
Save 2% with ACH / Wire Payment. Call for details
Financing options available
Financing estimates are based on the product price; selected add-ons and delivery services are excluded.
Product highlights
- Outside Slider Post Design
- Service Lift, Not Just Storage
- Dual Independent Safety Systems
Talk to a lift specialist
Expert product and freight support before you order
855-498-2147
- Authorized Triumph Dealerdirect manufacturer relationship
- Manufacturer Warrantyincluded with purchase
- Price Match Guaranteefind it lower and we will beat it
- No Sales Tax Collected Outside PAPA orders include sales tax
The Triumph NOS10000 is a 10,000 lb 4 post car lift that splits its time between storage and service. Park a second car underneath at the 5.5 in lowered height, or raise the runways to 87 in and work under 81.5 in of clearance with the included rolling jack tray carrying a floor jack or transmission jack between the runways.
The structure is Triumph's outside slider design: 4.75 x 4.75 in posts wrapped by oversized 6.5 x 6.5 in slide collars, which puts the contact surface on the outside of the column for a more rigid, lower-sway stance than inside slider builds. A 3 HP power unit lifts in 60 seconds, with 14 locking positions and dual independent safety systems.
It runs on 110V single phase, but mind the circuit: the motor pulls over 22 amps under load, so plan a dedicated 30 amp circuit on 10 gauge wiring. The 36 in aluminum ramps weigh 29 lb each, light enough for one person to set up and break down.
Features
Outside Slider Post Design
Triumph pairs 4.75 x 4.75 in posts with oversized 6.5 x 6.5 in slide collars riding the outside of the columns, putting more contact surface where the load is. The payoff is a rigid stance with less sway than the inside slider designs on cheaper four post lifts.
Service Lift, Not Just Storage
The included rolling jack tray slides between the runways to carry a floor jack or transmission jack, and 81.5 in of clearance under the raised runways leaves real room to work. With 14 locking positions, you set the working height to the job.
Dual Independent Safety Systems
Manual dead bolt locks are backed by a secondary redundant safety mechanism, with a single point release for quick height changes. Cable keepers stop the 3/8 in aircraft quality cables from running off the sheaves.
60 Second Rise on 110V
The 3 HP power unit reaches full height in 60 seconds on 110V single phase. Mind the circuit, though: draw exceeds 22 amps under load with peaks near 26, which is why the spec calls for a dedicated 30 amp circuit on 10 gauge wire.
One-Person Ramps and a Caster Kit
The 36 in aluminum approach ramps weigh 29 lb each, light enough for one person to set and stow. The included poly coated caster kit lets you reposition the whole lift, and the drip trays catch what stored cars leave behind.
Geometry That Fits Long Vehicles
204 in runways, 109 in of drive-thru width, and 44.5 in between the runways take long-wheelbase trucks and wide-track cars without guesswork. Lowered height is 5.5 in and full lift height is 87 in, under a 99.5 in overall column height.
Best For
Home Garage Storage
Stack two vehicles in one bay. The 5.5 in lowered runway height lets most cars drive underneath a stored vehicle, doubling the bay's capacity.
Car Collectors
The 109 in drive-thru width takes a wide range of vehicles, and the caster kit repositions the lift as the collection changes.
DIY Maintenance
Oil changes, brakes, suspension. The rolling jack tray and 81.5 in of under-runway clearance turn the storage lift into a working platform.
Small Shops and Fleets
10,000 lb of capacity covers passenger vehicles, light trucks, and SUVs, with boxed track runways built for daily commercial use.
Specifications
| Lifting Capacity | 10,000 lb |
|---|
| Runway Length | 204 in |
|---|---|
| Runway Width | 20 in |
| Drive-Thru Width | 109 in |
| Height Under Runway | 81.5 in |
| Space Between Runways | 44.5 in |
| Voltage | 110V single phase |
|---|---|
| Motor | 3 HP |
| Recommended Circuit | 30 amp dedicated, 10 gauge wiring |
| Hydraulic Fluid | 3 gallons ATF or clear hydraulic oil (do not mix) |
| Lifting Cables | 3/8 in aircraft quality |
| Shipping Weight | 2,535 lb |
|---|---|
| Shipping Dimensions | 206 x 22 x 36 in |
| Overall Height | 99.5 in |
|---|---|
| Overall Length | 210.5 in (247 in with ramps extended) |
| Overall Width | 123 in (base plate to base plate) |
| Width Between Posts | 94.5 in |
| Lift Height | 87 in |
| Lowered Height | 5.5 in |
| Lift Time | 60 seconds |
|---|---|
| Locking Positions | 14 |
| Lock Release | Single Point |
| Base Plate Size | 12 x 12 in |
|---|---|
| Base Plate Thickness | 5/8 in |
Installation Requirements
Floor Requirements
Level concrete in good condition, rated at 3,000 PSI minimum. The footprint with ramps extended is 247 x 123 in, so plan on at least 20.6 x 10.25 ft of floor, with four 12 x 12 in anchor points securing the base plates.
Electrical Requirements
110V single phase through the 3 HP motor, on a dedicated 30 amp circuit with 10 gauge wiring. The motor draws over 22 amps under load with peaks near 26, so a 20 amp circuit risks nuisance trips and shortened motor life; most homeowners will need an electrician for the circuit.
Ceiling Height
Minimum clearance is 100 in (8.3 ft) to clear the lift at full height; 10 ft or more gives comfortable working room with a vehicle raised. Professional installation is recommended for alignment and anchor placement, and check local codes for permits.
Shipping & Delivery
Warranty
Documents
Questions About This Product?
Our team can help with installation planning, freight coordination, and configuration.
Call (855) 498-2147Frequently Asked Questions
What vehicles can the NOS10000 lift?
The 10,000 lb capacity covers most passenger cars, light trucks, and SUVs, and the 204 in runways with 109 in drive-thru width accommodate a wide range of wheelbases and track widths. If a specific vehicle is in question, call with its weight and dimensions.
What electrical power does it require?
110V single phase through a 3 HP motor, on a dedicated 30 amp circuit with 10 gauge wiring. The motor draws over 22 amps under load with peaks near 26, so a standard 20 amp outlet will not do. Most homeowners will need an electrician.
Can I store a car underneath another car?
Yes. The lowered runway height is 5.5 in, so most vehicles drive underneath a car stored on the raised runways, and there is 81.5 in of clearance under the runways at full height for taller vehicles below.
Is this a service lift or storage only?
Both. The included rolling jack tray slides between the runways to position a floor jack or transmission jack, and with 81.5 in of clearance and 14 locking positions there is real workspace for oil changes, brakes, and suspension work.
How do I unload the lift when it arrives?
You need equipment rated for the full 2,535 lb shipping weight: a forklift, Bobcat, tractor, tow truck, or backhoe. The driver does not unload, and this cannot be done by hand.
What hydraulic fluid does it use?
3 gallons of either ATF or clear hydraulic oil, never mixed. Check the installation manual for the fill procedure before first use.
Have a question we didn't cover? Call (855) 498-2147 and our team will help.
About the Brand
Triumph
Garage Supply Guys Frequently Asked Questions
If something's not working out, just let us know. Keep in mind that some items might have a restocking fee. Check the product page for the specifics.
No worries, we've got you covered. We can send replacement parts or arrange for a new delivery. Just make sure to inspect everything when it arrives and give us a heads up right away if something's off.
All the details are at the bottom of our site under Shipping & Return Policy. You'll find everything about returns, freight damage, and any brand-specific rules.
Most larger items like car lifts and heavy equipment ship free, but depending on the brand there might be freight costs. Smaller items almost always have shipping fees via UPS, USPS, FedEx, etc. We'll show you any extra costs before you check out.
Shipping estimates are just that: estimates, and they're not guaranteed. Weather, freight delays, and carrier issues can throw things off, especially with bigger items. If you're on a tight timeline for installation, it's smart to give yourself some wiggle room.
Yep! Once it ships, we'll email you the tracking info so you can keep tabs on your delivery and plan accordingly.
We always send tracking info once your order ships. If it's been more than five business days and you haven't heard anything, just shoot us a message at support@garagesupplyguys.com or hit us up through the Contact Us page. We'll figure out what's going on.
Make sure whatever you're buying will actually fit your space. That means checking ceiling height, floor space, power requirements, and whether freight delivery can even get to your location. Trust us, it's way easier to confirm these details upfront.
Read through the product details carefully, especially for heavy or specialized items. If you're not sure about fit, shipping, installation, or anything else, just ask. We'd rather help you get it right the first time.
You'll get a confirmation email right away once you place your order. For most items like car lifts, parts, and shop tools, we'll have them shipped out within five business days if they're in stock. This goes for all major brands and replacement parts.
We don't offer installation services ourselves, but we can put you in touch with qualified installers in your area who you can work out pricing with directly. We can also handle this for you after your purchase.
Just reach out to us after your purchase and we'll connect you with trusted installers in your area. You can negotiate pricing and scheduling directly with them, or we can help coordinate the whole process for you.
Some items can be installed by experienced DIYers, but larger equipment like car lifts typically require professional installation for safety and warranty reasons. Check the product specifications and manufacturer requirements before deciding.
Yes! We're authorized dealers for all the major brands we carry. This means you get full manufacturer warranties, genuine parts, and proper support. You can always verify our dealer status directly with the manufacturer if you'd like.
It means you're getting the real deal - genuine products with full manufacturer warranties, access to official support, and the peace of mind that comes with buying from a legitimate dealer. No gray market products or void warranties here.