ROTARY VLXS10 10,000 lbs Low Rise Lift
- Authorized Online Dealer direct manufacturer relationship
- No Sales Tax outside PA where applicable
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- Manufacturer Warranty included with purchase
- Questions? +1 (855) 498-2147
Rotary VLXS10 - 10,000 lb ALI Gold Certified Low Rise Pad Lift for Quick Service Operations
The Rotary VLXS10 delivers 10,000 lb capacity in a surface-mounted, electric-hydraulic low-rise lift engineered for high-throughput tire and brake service. Featuring dual hydraulic lifting cylinders, a 4-inch collapsed height for low-profile vehicle clearance, and five rise height configurations up to 30-5/16 inches, this ALI Gold Certified pad lift handles passenger cars, light trucks, and SUVs in quick-lube environments.
Key Features & Benefits
10,000 lb Capacity in Low-Rise Format
The VLXS10 delivers 10,000 lb lifting capacity within the low-rise lift category, handling heavier SUVs and pickup trucks that exceed the limits of standard 7,000 lb models. The robust design distributes weight across four lifting pads with generous contact surfaces to support vehicles at manufacturer-specified pick-up points.
Many quick-service operations struggle with the increasing weight of modern vehicles. Full-size SUVs, crossovers, and light-duty trucks often exceed the capacity of entry-level low-rise lifts, forcing shops to either turn away work or invest in more expensive mid-rise or two-post installations.
This enables tire and brake shops to service the full range of consumer vehicles without capacity limitations. The 10K rating addresses the growing market of heavy SUVs and trucks while maintaining the compact footprint and quick drive-on convenience of a low-rise design.
Multi-Step Rise Configuration
The VLXS10 offers five distinct rise height options: 21-3/4 inches (flat), 23-1/4 inches (short pad), 26-1/16 inches (low step), 28-1/16 inches (mid step), and 30-5/16 inches (high step/tall pad). Three locking leg positions at 13-3/8, 17-3/8, and 21-3/8 inches provide additional height adjustment for secure technician access.
Fixed-height low-rise lifts force technicians to work at awkward angles depending on vehicle height and service task. This leads to fatigue, slower service times, and potential ergonomic injuries over extended shifts in high-volume environments.
This improves technician comfort by allowing height adjustment to match both the vehicle and the specific task. Tire rotations, brake inspections, and suspension work each benefit from different working heights, and the multi-step system accommodates all three without repositioning.
115V Single-Phase Power Operation
The VLXS10 operates on standard 115V single-phase electrical power, eliminating the need for dedicated 208-230V circuits that many competing lifts require. The electric-hydraulic power unit connects to existing shop outlets without electrical upgrades or permit requirements for new service panels.
Many shops face significant installation costs when adding lifts that require higher voltage circuits. Electrical upgrades often require permits, licensed electricians, and potential panel replacements - adding thousands of dollars and weeks of delay to lift installations.
This reduces total cost of ownership and simplifies installation planning. Shops can add VLXS10 units to existing bays using available electrical infrastructure, making capacity expansion faster and more cost-effective.
Wide Drive-Over Approach Design
The VLXS10 features wide drive-over ramps and extended side rails with an outside platform width of 70-3/4 inches and overall width of 78-1/2 inches. The 4-inch collapsed height provides clearance for low-profile vehicles while the generous approach angles accommodate modern wide-track SUVs and trucks.
Narrow platform designs struggle with the increasing track width of modern vehicles. Wide-wheelbase SUVs and trucks can require careful positioning or may not fit safely on lifts designed for earlier vehicle generations.
This enables fast, confident vehicle positioning for the full range of modern passenger vehicles. Technicians spend less time aligning vehicles and more time completing service work, improving bay throughput in high-volume operations.
Dual Hydraulic Lifting Cylinders
The VLXS10 uses dual hydraulic cylinders with a flow divider to provide balanced, synchronized lifting across both platforms. This dual-cylinder configuration distributes lifting force evenly, preventing the platform tilt and uneven rise that can occur with single-cylinder designs under off-center loads.
Single-cylinder low-rise lifts can struggle with uneven weight distribution, particularly when heavy components like engines or transmissions shift the vehicle's center of gravity. Uneven lifting creates safety concerns and can stress vehicle frames at contact points.
This improves lifting stability and extends equipment life by distributing hydraulic forces across two independent cylinders. The balanced rise also reduces stress on vehicle pick-up points, protecting customer vehicles during service operations.
ALI Gold Certified Safety Compliance
The VLXS10 carries ALI Gold Certification (VLXS10000) and meets the ANSI/ALI ALCTV-2017 standard. The lift has been third-party tested by an OSHA-accredited Nationally Recognized Testing Laboratory (NRTL) and carries ETL certification, providing documented compliance with industry safety requirements.
Lower-cost lifts often lack independent safety certification, leaving shops exposed to liability concerns and potential OSHA compliance issues. Insurance providers and facility inspectors increasingly require documented certification for shop equipment.
This eliminates compliance uncertainty by providing third-party verification of safety performance. The ALI Gold certification demonstrates that the lift meets rigorous design and performance standards, supporting shop insurance requirements and workplace safety programs.
Applications & Use Cases
- Quick-Service Tire Operations: High-volume tire mounting, balancing, and rotation for passenger cars, SUVs, and light trucks with rapid drive-on positioning and ergonomic working height.
- Brake Service Centers: Brake pad replacement, rotor inspection, and caliper service with adjustable rise heights for optimal technician access to wheel assemblies.
- Quick Lube Facilities: Oil changes and fluid services on vehicles up to 10,000 lb, with low collapsed height accommodating lowered and sport vehicles.
- Dealership Service Departments: Multi-brand service operations requiring capacity for both passenger cars and heavier SUV/truck inventory.
- Fleet Maintenance Operations: Light truck and van fleet service with consistent throughput and standardized lift positioning.
- Unibody and Frame-Contact Vehicles: Versatile adapter system reaches manufacturer-specified pick-up points on both unibody construction and traditional frame vehicles.
Technical Specifications
| Specification | Value |
|---|---|
| Lifting Capacity | 10,000 lb (4,536 kg) |
| Rise - Flat | 21-3/4 inches (552 mm) |
| Rise - Short Pad | 23-1/4 inches (591 mm) |
| Rise - Low Step | 26-1/16 inches (662 mm) |
| Rise - Mid Step | 28-1/16 inches (713 mm) |
| Rise - High Step/Tall Pad | 30-5/16 inches (770 mm) |
| Collapsed Height | 4 inches (102 mm) |
| Horizontal Movement During Rise | 16 inches (406 mm) |
| Specification | Value |
|---|---|
| Length Overall | 90-1/2 inches (2,299 mm) |
| Width Overall | 78-1/2 inches (1,994 mm) |
| Width Between Platforms | 22-3/4 inches (578 mm) |
| Outside Width of Platforms | 70-3/4 inches (1,797 mm) |
| Platform Length | 51-1/4 inches (1,302 mm) |
| Pad Length | 17 inches (432 mm) |
| Locking Leg Heights | 13-3/8 / 17-3/8 / 21-3/8 inches (340 / 441 / 543 mm) |
| Specification | Value |
|---|---|
| Voltage | 115V Single Phase |
| Power Type | Electric-Hydraulic |
What's Included
- (4) Heat-Resistant Pads - Durable contact pads for direct vehicle support
- (4) 1-1/2 inch Rubber Block Adapters - For fine height adjustment and frame protection
- (4) Three-Position Adapters - Heights of 4-5/16 inches, 6-5/16 inches, and 8-9/16 inches for reaching manufacturer pick-up points
Installation Requirements
Mounting Requirements
- Mounting Type: Surface-mounted design requiring anchoring to concrete floor
- Floor Surface: Concrete floor required for stability and secure anchoring
- Anchoring: Anchor hardware installation per manufacturer specifications
Electrical Requirements
- Voltage: 115V single-phase - standard shop electrical
- Circuit: Dedicated circuit recommended for consistent operation
Installation Notes
- Professional Installation: Installation should be performed by qualified personnel following manufacturer installation manual
- Concrete Specifications: Contact manufacturer for specific concrete depth and PSI requirements for your installation
- Permits: Verify local code compliance and permit requirements before installation
Shipping & Delivery
Freight Information
Shipping Weight: 1,375 lb (624 kg)
Delivery Method: Ships via flatbed freight truck
Freight Charges: Calculated separately from product price - contact for quote
Receiving Requirements
Unloading Equipment: Forklift may be required for unloading due to product weight
Inspection: Inspect all packaging for visible damage before signing bill of lading. Note any damage on BOL before driver departs.
Warranty Coverage
Manufacturer Warranty
Warranty terms vary by source. Please verify specific warranty coverage, duration, and conditions directly with manufacturer or authorized dealer before purchase.
Registration: Product registration may be required - confirm requirements with dealer
Eligibility: Verify transferability terms and installation requirements with manufacturer
Ready to Upgrade Your Shop?
Get expert guidance on the Rotary VLXS10 for your facility. Our team can help with product selection, installation planning, warranty verification, and technical specifications.
Frequently Asked Questions
What is the lifting capacity of the Rotary VLXS10?
The Rotary VLXS10 has a maximum lifting capacity of 10,000 lb (4,536 kg), making it suitable for passenger cars, SUVs, and light trucks that exceed the limits of standard 7,000 lb low-rise lifts. The lift is ALI Gold Certified (VLXS10000) to ANSI/ALI ALCTV-2017 standards, with third-party testing by an OSHA-accredited Nationally Recognized Testing Laboratory and ETL certification for documented safety compliance.
What are the rise height options for the VLXS10?
The VLXS10 offers five rise height configurations: 21-3/4 inches (flat), 23-1/4 inches (short pad), 26-1/16 inches (low step), 28-1/16 inches (mid step), and 30-5/16 inches (high step/tall pad). Three locking leg positions at 13-3/8, 17-3/8, and 21-3/8 inches provide additional height adjustment for secure technician access during tire, brake, and suspension work.
What electrical power does the VLXS10 require?
The VLXS10 operates on standard 115V single-phase electrical power, allowing connection to existing shop outlets without requiring electrical upgrades or new 208-230V circuits that many competing lifts need. The electric-hydraulic power unit drives dual lifting cylinders for balanced, synchronized operation across both platforms. A dedicated circuit is recommended for consistent performance, particularly in shops running multiple pieces of equipment simultaneously.
What adapters are included with the Rotary VLXS10?
The VLXS10 includes four heat-resistant pads for direct vehicle support, four 1-1/2 inch rubber block adapters for fine height adjustment and frame protection, and four three-position adapters with heights of 4-5/16 inches, 6-5/16 inches, and 8-9/16 inches. This complete adapter kit allows technicians to reach manufacturer-specified pick-up points on various frame types without additional purchases.
What is the collapsed height of the VLXS10?
The VLXS10 has a collapsed height of 4 inches (102 mm), providing clearance for low-profile vehicles including lowered cars and sport vehicles that may not clear taller low-rise lift designs. The overall length is 90-1/2 inches (2,299 mm) with an overall width of 78-1/2 inches (1,994 mm), and the outside platform width measures 70-3/4 inches (1,797 mm) to accommodate wide-track vehicles.
What certifications does the Rotary VLXS10 have?
The VLXS10 is ALI Gold Certified (VLXS10000) and meets ANSI/ALI ALCTV-2017 standards. The lift has been third-party tested by an OSHA-accredited Nationally Recognized Testing Laboratory (NRTL) and carries ETL certification. These certifications provide documented compliance with industry safety requirements, supporting shop insurance requirements, facility inspections, and workplace safety programs in professional automotive service environments.
What are the installation requirements for the VLXS10?
The VLXS10 is a surface-mounted lift requiring anchoring to a concrete floor with appropriate depth and strength for secure operation. It uses 115V single-phase electrical power with a dedicated circuit recommended. The lift measures 90-1/2 inches long by 78-1/2 inches wide. Contact the manufacturer or your dealer for specific concrete depth and PSI requirements, and verify local permit requirements before beginning installation work.
What vehicles can the VLXS10 accommodate?
The VLXS10 accommodates passenger cars, light trucks, SUVs, and wide wheelbase vehicles up to 10,000 lb (4,536 kg). The 70-3/4 inch outside platform width and wide drive-over ramps with extended side rails handle modern wide-track vehicles. The 4-inch collapsed height clears low-profile vehicles, and the included adapter system works with both unibody construction and traditional frame-contact vehicles at manufacturer-specified pick-up points.
About the Brand