Product highlights
- Three-stage Cargo AV Arms reach from 36 1/4 to 75 inches
- 16,000 lb capacity for vans and mixed commercial fleets
- Choose the ceiling profile before installation
Rotary SPO16-AV Cargo 16,000 lb Symmetric Two-Post Lift
SKU: SPO16-AV CARGO-BL
$27,748.00
FREE FREIGHT SHIPPING
Residential, liftgate, and limited-access delivery included at no extra charge.
Rotary Solutions rebate
$800 back on the SPO16-AV
Buy by September 30, 2026, claim by October 31, 2026. Paid as a prepaid card by Rotary Solutions, not a discount off this price.
One per unit, eligibility rules apply. Rebate details and how to claim
Save 2% with ACH / Wire Payment. Call for details
Financing options available
Financing estimates are based on the product price; selected add-ons and delivery services are excluded.
Talk to a lift specialist
Expert product and freight support before you order
855-498-2147
- Authorized Rotary Dealerdirect manufacturer relationship
- Manufacturer Warrantyincluded with purchase
- Price Match Guaranteefind it lower and we will beat it
- No Sales Tax Collected Outside PAPA orders include sales tax
The Rotary SPO16-AV Cargo is a 16,000 lb symmetric two-post lift built around three-stage Cargo AV Arms for longer-wheelbase vans and commercial vehicles. The arms reach from 36 1/4 to 75 inches, giving technicians more extension for widely spaced OEM pickup points while retaining the 4 3/4-inch minimum adapter height needed for lower vehicles.
Buyers choose the ceiling configuration, power system, and color. Standard and Low Ceiling versions let the installer set the lift within the selected height range, while three installation widths help match the structure to the bay. Standard power provides an 81-second rise from 208-230V service; Shockwave reduces published rise time to 60 seconds through Rotary's battery-powered DC system.
This is commercial equipment that needs a properly prepared bay. Check vehicle pickup-point fit, ceiling height, concrete, electrical service, compressed air, installation width, and unloading equipment before ordering. Garage Supply Guys can help confirm the correct configuration for the vehicles and facility.
Features
Three-stage Cargo AV Arms reach from 36 1/4 to 75 inches
Rotary's extended Cargo AV Arms are designed to reach widely spaced OEM pickup points on longer-wheelbase vans and commercial vehicles. Front and rear arms share the same published range, while the 4 3/4-inch minimum adapter height preserves access to lower pickup points. Always confirm the vehicle's lifting points, axle loading, arm reach, and the 4,000 lb rating of each arm before lifting.
16,000 lb capacity for vans and mixed commercial fleets
The true-symmetric layout places the vehicle's center of gravity between the columns and leaves working room ahead of the posts for truck and van doors. Rotary rates the lift at 16,000 lb total and 4,000 lb per arm. It is intended for Class 1 through Class 5 coverage, but some Class 4 and Class 5 vehicles can exceed an individual arm rating even when total vehicle weight remains below lift capacity.
Choose the ceiling profile before installation
The Standard configuration installs from 15 feet to 16 feet 6 inches and requires 15 feet 2 inches to 16 feet 8 inches of ceiling clearance. The Low Ceiling configuration installs from 13 feet 6 inches to 14 feet 6 inches and requires 13 feet 8 inches to 14 feet 8 inches. The installer then adjusts the structure in 6-inch increments within the ordered configuration's range.
Standard or Shockwave power
Standard power uses a 2 HP, 208-230V power unit with an 81-second published rise time. Shockwave uses Rotary's 5 HP DC power system and reduces published rise time to 60 seconds. Shockwave requires two Group 24 batteries and a 110V charging supply; the batteries are not included. Both configurations have a published 20-second descent time, and actual cycle times vary with vehicle weight.
Double-S columns and serviceable locking hardware
Rotary's single-piece Double-S columns form the carriage channels, and a single-piece overhead connects the structure. The lift is performance-tested to 20,000 cycles. Column locks engage every 4 inches and remain accessible for maintenance, while automatic arm restraints engage as the lift rises.
Adapters and spotting equipment are included
Each lift includes four thread-up frame-engaging adapters, four clip-on rubber pads for unibody vehicles, four 5-inch extensions, two 10-inch extensions, and two three-position wheel spotting dishes. The manual limits stacked adapter extensions to 15 inches.
Video
Best For
Cargo van and delivery-fleet service
The extended arm range is suited to shops servicing longer-wheelbase cargo vans, delivery vehicles, and upfitted fleet units whose approved pickup points sit beyond the reach of shorter arms. Vehicle-specific fit must still be confirmed from the OEM lifting information.
Mixed fleet and municipal service
A practical fit for commercial, government, and utility fleets that need one bay to cover passenger vehicles, SUVs, pickups, vans, and heavier roadgoing vehicles within the lift and per-arm ratings. The 75-inch maximum reach is the defining Cargo-arm advantage.
Unibody and battery-electric vehicles
The 4 3/4-inch minimum adapter height, tapered three-stage arms, thread-up adapters, and clip-on pads provide the positioning range needed to reach approved pickup points on many unibody, sport, and battery-electric vehicles. Verify each vehicle's OEM lifting procedure before use.
High-capacity commercial bays
This lift makes sense where the shop can provide the required ceiling, 15 by 30 foot minimum bay, suitable concrete, 208-230V or Shockwave charging service, compressed air, and mechanical freight unloading. It is more equipment than a typical residential garage can accommodate.
Specifications
| Lifting capacity | 16,000 lb (7,258 kg) |
|---|---|
| Maximum load per arm | 4,000 lb (1,814 kg) |
| Rise | 76 1/4-78 in |
| Standard rise / descent time | 81 / 20 seconds |
| Shockwave rise / descent time | 60 / 20 seconds |
| Lock spacing | Every 4 in |
| Performance testing | 20,000 lift cycles |
| Standard overall height | 15 ft-16 ft 6 in, adjustable in 6 in increments |
|---|---|
| Standard minimum ceiling height | 15 ft 2 in-16 ft 8 in, based on selected installation height |
| Low Ceiling overall height | 13 ft 6 in-14 ft 6 in, adjustable in 6 in increments |
| Low Ceiling minimum ceiling height | 13 ft 8 in-14 ft 8 in, based on selected installation height |
| Standard power system | 2 HP, 208-230V, single-phase, 60 Hz |
|---|---|
| Standard circuit | 20A dedicated circuit with time-delay fuse or circuit breaker |
| Shockwave power system | 5 HP DC system with two Group 24 batteries |
| Shockwave charging input | 110-120V, 60 Hz, 3.15A |
| Compressed-air supply | 90-100 psi |
| Hydraulic-fluid specification | Dexron III ATF or ISO 32 hydraulic fluid |
| Hydraulic-system capacity | 14 L |
| Estimated packaged dimensions | Approximately 148 x 48 x 38 in |
|---|---|
| Estimated packaged weight | Approximately 2,400-3,000 lb, depending on configuration |
| Estimated package count | One primary palletized/skidded LTL freight unit |
| Arm design | Three-stage Cargo All-Vehicle AV Arms, front and rear |
|---|---|
| Minimum arm reach | 36 1/4 in |
| Maximum arm reach | 75 in |
| Minimum adapter height | 4 3/4 in |
| Maximum adapter height | 16 in |
| Maximum stacked-extension height | 15 in |
| Overall width - Narrow / Standard / Wide | 12 ft 11 in / 13 ft 5 in / 13 ft 11 in |
|---|---|
| Drive-through clearance - Narrow / Standard / Wide | 105 11/32 in / 111 11/32 in / 117 11/32 in |
| Inside columns - Narrow / Standard / Wide | 120 15/32 in / 126 15/32 in / 132 15/32 in |
| Minimum bay size | 15 x 30 ft |
| Certification | ALI Gold Certified |
|---|---|
| Column design | Single-piece Double-S columns |
| Overhead | Single-piece overhead structure |
| Lock release | Single-point manual release |
| Arm restraints | Automatic engagement when lift is raised |
| Operating environment | Indoor use; 41-104 degrees F (5-40 degrees C) |
What's Included
- Three-stage Cargo All-Vehicle AV Arm assemblies x4
- Thread-up frame-engaging adapters x4
- Clip-on rubber adapter pads x4
- 5-inch stackable adapter extensions x4
- 10-inch stackable adapter extensions x2
- Three-position wheel spotting dishes x2
- Column-mounted adapter racks x2
Optional Accessories
- Tech Light Line Light 2FA5701
- Tech Light Line Light RFA5702
- 200 lb pneumatic tire and wheel liftMW-200
- 500 lb pneumatic tire and wheel liftMW-500
- Low-profile adapter kit for three-stage armsFJ71015-1KIT
- Wide-frame heavy-duty truck adaptersFJ6265ZN
Not Included
- Shockwave configurations only: Group 24 batteries required for the Shockwave power system
Installation Requirements
Choose the ceiling configuration first
Order Standard or Low Ceiling based on the lowest overhead obstruction in the bay. Standard models adjust from 15 feet to 16 feet 6 inches and require 15 feet 2 inches to 16 feet 8 inches of ceiling height. Low Ceiling models adjust from 13 feet 6 inches to 14 feet 6 inches and require 13 feet 8 inches to 14 feet 8 inches. The installer sets the final height in 6-inch increments within the ordered model's range.
Lay out the bay before drilling
Rotary publishes Narrow, Standard, and Wide installation settings. Overall width ranges from 12 feet 11 inches to 13 feet 11 inches, and drive-through clearance ranges from 105 11/32 to 117 11/32 inches. Plan on a minimum 15 by 30 foot bay and confirm doors, walls, lights, heaters, roof structure, and vehicle approach before locating the columns. Width is an installation setting, not a product variant.
Match the foundation to the applicable anchoring condition
Install on sound concrete only, never asphalt or a similar unstable surface. Rotary specifies at least 3,000 psi concrete. Its installation table lists 4 1/4 inches under the Standard condition, 5 inches under ANSI/ALI ALCTV, and 6 inches under IBC, with different anchors, embedment depths, and edge-clearance requirements. Seismic requirements vary by location. Have the slab and local requirements reviewed before installation rather than assuming one thickness applies everywhere.
Provide the correct power and compressed air
Standard power requires 208-230V, single-phase, 60 Hz service on a dedicated 20A circuit. Shockwave uses two Group 24 batteries with a 110-120V, 60 Hz charging input; batteries are not included. Both power choices require a 90-100 psi main air supply for the lift controls. Electrical work must be completed by a qualified electrician in accordance with NEC and local codes.
Plan mechanical unloading
The lift is expected to arrive as one long palletized or skidded LTL freight unit measuring approximately 148 by 48 by 38 inches and weighing approximately 2,400 to 3,000 lb, depending on configuration. These are planning estimates rather than factory package specifications. Do not rely on standard liftgate unloading. Arrange equipment capable of safely controlling a long load up to approximately 3,000 lb, and confirm the final bill of lading and unloading plan before delivery.
Install and commission the complete system
The columns, extensions, overhead, cables, hydraulics, arms, restraints, locks, spotting dishes, electrical supply, and air circuit must be assembled and tested as a system. Rotary recommends a forklift when standing the columns. After installation, verify equal lifting, lock engagement, overhead-switch operation, cable adjustment, hydraulic integrity, arm restraint operation, and clearances with a representative vehicle. Contact Garage Supply Guys for installation coordination.
Documents
Rotary SPO16 and SPO20 Parts BreakdownExploded assemblies, parts lists, and service-reference diagrams.
Rotary SPO16 and SPO20 Operation ManualOperating procedures, safety instructions, maintenance, and troubleshooting.
Rotary SPO16-AV Specification SheetCurrent product features, configurations, dimensions, performance, and accessory information.
Frequently Asked Questions
What vehicles can the Rotary SPO16-AV Cargo lift?
Rotary positions the SPO16 platform for Class 1 through Class 5 roadgoing vehicles. The Cargo version adds 36 1/4 to 75 inch arms for longer-wheelbase vans and commercial vehicles with widely spaced pickup points. Capacity is 16,000 lb total and 4,000 lb per arm. Confirm axle loading, vehicle weight, OEM lifting points, arm reach, and adapter contact before ordering or lifting.
What is the difference between Standard and Low Ceiling configurations?
The Standard configuration installs from 15 feet to 16 feet 6 inches and requires 15 feet 2 inches to 16 feet 8 inches of ceiling height. The Low Ceiling configuration installs from 13 feet 6 inches to 14 feet 6 inches and requires 13 feet 8 inches to 14 feet 8 inches. The installer adjusts the lift in 6-inch increments within the ordered configuration's range.
What is the difference between Standard power and Shockwave?
Standard power uses a 2 HP, 208-230V power unit and has a published 81-second rise time. Shockwave uses Rotary's 5 HP battery-powered DC system with a 110-120V charging input and has a published 60-second rise time. Both have a published 20-second descent time, and actual cycle times vary with vehicle weight. Shockwave requires two Group 24 batteries, which are not included.
How much ceiling and floor space does the SPO16-AV Cargo require?
Rotary publishes a 15 by 30 foot minimum bay. Depending on the installation setting, overall width is 12 feet 11 inches, 13 feet 5 inches, or 13 feet 11 inches. Required ceiling height depends on the selected Standard or Low Ceiling configuration and the final 6-inch height setting. Check the complete bay for doors, heaters, lights, roof structure, and other overhead obstructions before ordering.
What concrete does the SPO16-AV Cargo require?
Rotary requires sound concrete rated at least 3,000 psi and prohibits installation on asphalt or similar unstable surfaces. Required thickness, anchor type, embedment, and edge clearance depend on the applicable Standard, ANSI/ALI ALCTV, IBC, seismic, and local-code conditions. Rotary's table lists minimum thicknesses of 4 1/4, 5, or 6 inches for the documented conditions. Have the actual slab and local requirements evaluated before installation.
What comes with the Rotary SPO16-AV Cargo?
The lift includes four three-stage Cargo AV Arms, four thread-up adapters, four clip-on rubber pads, four 5-inch extensions, two 10-inch extensions, two three-position spotting dishes, and column-mounted adapter storage. The manual limits stacked adapter extensions to 15 inches.
Is the Rotary SPO16-AV Cargo ALI certified?
Yes. Rotary identifies the SPO16 platform as ALI Gold Certified. The lift also includes automatic arm restraints, locks that engage every 4 inches, a single-point manual lock release, an overhead switch, and a single-piece overhead structure.
What warranty applies to the SPO16-AV Cargo?
Rotary's standard warranty for qualifying surface lifts up to 30,000 lb provides 5 years of structural-parts coverage, 1 year of functional-parts coverage, and 1 year of labor coverage. Qualifying Rotary Authorized Installer installation and lift registration extend functional-parts coverage to 2 years. Shockwave products require authorized installation and factory registration to activate first-year parts and labor coverage. Warranty applies to the original owner and remains subject to Rotary's installation, operation, maintenance, exclusions, and authorized-service terms. Contact Garage Supply Guys for help with registration, installation, or a warranty question.
How should the lift be received and unloaded?
Plan for a long palletized or skidded LTL shipment estimated at approximately 148 by 48 by 38 inches and 2,400 to 3,000 lb, depending on configuration. Do not rely on standard liftgate unloading. Arrange suitable mechanical unloading equipment and confirm the final bill of lading, carrier equipment, package count, dimensions, and weight with Garage Supply Guys before delivery.
When should I choose the standard SPO16-AV instead?
Choose the standard SPO16-AV when its 33 1/4 to 70 inch arm range covers the vehicles and you do not need the Cargo model's additional extension. Choose this Cargo version when longer-wheelbase vehicles require its 36 1/4 to 75 inch reach. Contact Garage Supply Guys with the vehicle year, make, model, wheelbase, axle information, and OEM pickup points when fit is uncertain.
About the Brand
Rotary
Garage Supply Guys Frequently Asked Questions
If something's not working out, just let us know. Keep in mind that some items might have a restocking fee. Check the product page for the specifics.
No worries, we've got you covered. We can send replacement parts or arrange for a new delivery. Just make sure to inspect everything when it arrives and give us a heads up right away if something's off.
All the details are at the bottom of our site under Shipping & Return Policy. You'll find everything about returns, freight damage, and any brand-specific rules.
Most larger items like car lifts and heavy equipment ship free, but depending on the brand there might be freight costs. Smaller items almost always have shipping fees via UPS, USPS, FedEx, etc. We'll show you any extra costs before you check out.
Shipping estimates are just that: estimates, and they're not guaranteed. Weather, freight delays, and carrier issues can throw things off, especially with bigger items. If you're on a tight timeline for installation, it's smart to give yourself some wiggle room.
Yep! Once it ships, we'll email you the tracking info so you can keep tabs on your delivery and plan accordingly.
We always send tracking info once your order ships. If it's been more than five business days and you haven't heard anything, just shoot us a message at support@garagesupplyguys.com or hit us up through the Contact Us page. We'll figure out what's going on.
Make sure whatever you're buying will actually fit your space. That means checking ceiling height, floor space, power requirements, and whether freight delivery can even get to your location. Trust us, it's way easier to confirm these details upfront.
Read through the product details carefully, especially for heavy or specialized items. If you're not sure about fit, shipping, installation, or anything else, just ask. We'd rather help you get it right the first time.
You'll get a confirmation email right away once you place your order. For most items like car lifts, parts, and shop tools, we'll have them shipped out within five business days if they're in stock. This goes for all major brands and replacement parts.
We don't offer installation services ourselves, but we can put you in touch with qualified installers in your area who you can work out pricing with directly. We can also handle this for you after your purchase.
Just reach out to us after your purchase and we'll connect you with trusted installers in your area. You can negotiate pricing and scheduling directly with them, or we can help coordinate the whole process for you.
Some items can be installed by experienced DIYers, but larger equipment like car lifts typically require professional installation for safety and warranty reasons. Check the product specifications and manufacturer requirements before deciding.
Yes! We're authorized dealers for all the major brands we carry. This means you get full manufacturer warranties, genuine parts, and proper support. You can always verify our dealer status directly with the manufacturer if you'd like.
It means you're getting the real deal - genuine products with full manufacturer warranties, access to official support, and the peace of mind that comes with buying from a legitimate dealer. No gray market products or void warranties here.