ROTARY RT30 Repair Table for LT35A Lift, 3,000 lbs

3,500 lb Heavy-Duty Capacity

The LT35A is rated for 3,500 lbs (1,587 kg), making it suitable for heavy automotive components including EV and hybrid battery modules, complete engine assemblies, transmissions, and integrated drivetrain systems. This capacity exceeds typical lift tables and accommodates professional service shop requirements for high-value component handling.

Modern EV platforms, multi-displacement engines, and complex drivetrain assemblies can be lifted, held, and repositioned with confidence and control throughout extended service procedures. The wide base and mechanical safety system distribute load evenly across the platform, eliminating concerns about stability even at maximum rated capacity.

This enables shops to consolidate heavy-duty lifting requirements into a single, versatile platform rather than deploying multiple specialized lift tables across service bays.

Air-Hydraulic Operation Without Electric Motors

The LT35A operates exclusively on regulated shop air at 90-120 psi, requiring no standalone electric motor, battery, or dedicated power connection. This eliminates electrical complexity, startup delays, and the infrastructure upgrades typically required for motor-driven lifts.

Shops with intermittent or variable electrical capacity can deploy the LT35A immediately without facility modifications. The smooth, controlled hydraulic operation ensures predictable vertical travel and responsive positioning. Traditional electrical lifts create bottlenecks when facility power is redirected to multiple tools during simultaneous service procedures.

This improves workflow efficiency by eliminating power conflicts between lift operation and other shop equipment, while air-powered operation means instant responsiveness to operator controls without motor warm-up or battery drain.

Adjustable Height 27-67 Inches for Ergonomic Positioning

The LT35A delivers a 40.75-inch vertical travel range, from 26.25 inches collapsed height to 67.38 inches maximum. Optional 8-inch casters extend maximum height to 69.38 inches. This broad range accommodates diverse shop layouts and ergonomic requirements across different service bays and equipment configurations.

The split sliding top feature enables fine-grain component alignment during service, allowing technicians to position batteries, engines, and assemblies with precision without manual shimming or secondary lifting equipment. This level of positional control reduces rework and improves service quality across diagnostic and repair procedures.

This eliminates the need for multiple specialized lifts at different fixed heights, reducing capital investment and shop floor complexity while improving technician ergonomics and service speed.

Mechanical Safety Locks Provide Load Redundancy

The LT35A features mechanical locking positions engaged at 90-120 psi shop air pressure. These air-released locks provide redundant load holding independent of hydraulic pressure, ensuring the load remains secure even if air supply is interrupted during service work.

Traditional restraint systems fail when technicians perform heavy-component removal or installation operations. This design addresses the industry-wide challenge by providing automatic adaptive grip that engages on contact, requiring no manual lock activation during the service process. Each lock position is positively engaged and released only by deliberate operator action.

This eliminates arm slippage risks and provides fail-safe load security critical for high-value battery modules and extended diagnostic procedures where accidental load movement could cause damage or injury.

360-Degree Swivel Casters with Locking Stability

Standard 360-degree swivel casters with lockable positions provide both free movement for positioning the lift table and rock-solid stability during service work. The LT35A footprint of 36.25 inches wide by 97.38 inches long creates a low center of gravity that resists tip-over even when component weight is offset toward the edge during diagonal positioning.

Locked casters eliminate drift and vibration that could compromise precision positioning during delicate battery work or engine service. Unlocked positions enable rapid repositioning between service bays without manual table rotation, reducing time spent on equipment movement rather than productive service work.

This improves shop workflow efficiency by enabling quick component access from multiple angles while maintaining exceptional stability during the service operation itself.

What's Included

• LT35A lift table assembly - Platform and scissor base with integrated pneumatic-hydraulic system
• Standard swivel locking casters - 360-degree rotation with lockable positioning
• Mechanical locking safety system - Air-released locks at 9-10 positions for redundant load holding
• Air-hydraulic control system - Integrated pump and valve assembly for smooth height adjustment

Note: Repair tables, platform extensions, and specialized attachments are sold separately as compatible accessories.

Shop Air Supply Specification

• Regulated Air Pressure: 90-120 psi minimum continuous supply
• Air Quality: Clean, dry shop air free of excess moisture and oil contaminants
• Connection: Standard shop air line with appropriate compression couplings
• No Electric Power Required: Eliminates electrical infrastructure upgrades

Floor Preparation & Clearance

• Floor Surface: Flat, level shop floor to ensure even weight distribution and safe operation across all height positions
• Clearance Space: Minimum 8 feet of clear space around unit for caster movement and full height extension
• Load Capacity: Verify floor can support combined weight of unit (1,300-1,375 lbs) plus maximum load (3,500 lbs total: 4,800-4,875 lbs)

Installation Notes

• Functional Testing: Perform test of mechanical locks and air supply responsiveness before first load-bearing operation
• Operator Manual: Consult official Rotary installation and operation manual for complete setup, maintenance, and safety procedures
• Local Code Compliance: Verify any facility-specific installation requirements or local regulations before deployment

Freight Coverage & Delivery

Shipping Method: LTL (Less Than Truckload) freight due to size and weight (1,300-1,375 lbs, 36.25 in W x 97.375 in L overall footprint).

Delivery Requirements: Loading dock or tailgate service required for safe unloading. Standard inside delivery not available due to equipment footprint and weight.

Delivery Options: Liftgate delivery and residential delivery available upon request with additional freight charges.

Damage Reporting & Inspection

Upon Receipt: Inspect all shipment packages before signing bill of lading. Note any visible damage to exterior packaging on BOL before driver departs your facility.

Concealed Damage Reporting Window: Report concealed damage (damage discovered after delivery) within 15 days of receipt for full freight and replacement coverage. Submit photos and detailed damage descriptions to freight carrier and Garage Supply Guys.

Manufacturer Warranty Program

Warranty Coverage: The Rotary LT35A includes manufacturer warranty protection on the lift table assembly, scissor mechanism, hydraulic system, and mechanical lock components.

Duration & Conditions: Specific warranty duration and coverage details vary by authorized dealer and purchase agreement. Coverage typically includes defects in materials and workmanship under normal service conditions.

Registration & Eligibility: Product registration may be required within 30 days of purchase. Coverage is valid for the original purchaser only (non-transferable). Installation must be performed following manufacturer specifications.

For Details: Contact Garage Supply Guys or your authorized Rotary Lift dealer for complete warranty terms, registration procedures, and coverage documentation.