ROTARY LT33A Electric/Hydraulic Lifting Table (3,300 lbs; 27-67″ Height)
- Authorized Online Dealer direct manufacturer relationship
- No Sales Tax outside PA where applicable
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- Manufacturer Warranty included with purchase
- Questions? +1 (855) 498-2147
Rotary LT33A 3,300 lb Lifting Table for EV Battery & Heavy Component Service
The Rotary LT33A delivers 3,300 lbs of lifting capacity in an air-hydraulic design, engineered for precision battery and drivetrain service in professional shops. Featuring a split sliding top platform, mechanical safety locks, and foot pedal air-hydraulic operation, this lifting table handles EV batteries, engines, transmissions, and suspension components with controlled vertical positioning.
Key Features & Benefits
Air-Over-Hydraulic Foot Pedal System
The LT33A operates via a regulated air-over-hydraulic pump, delivering smooth vertical lifting controlled entirely through a floor-mounted foot pedal. The system operates at 90–120 psi compressed air pressure, requiring no electric motors, batteries, or external power sources beyond a standard shop air supply.
This addresses the industry-wide challenge of electric lift tables requiring dedicated circuits, power outages affecting operations, and battery maintenance in high-demand service environments. Traditional manual jacks require constant operator effort and lack position precision, while pneumatic foot pedal systems provide hands-free operation once the desired height is reached.
This enables faster battery removal and installation cycles, reduces operator fatigue during repetitive lifting operations, and maintains full functionality even during power loss situations common in busy service bays.
9-Position Mechanical Safety Locking System
The LT33A incorporates 9 mechanical locking positions distributed across the lift height range, providing redundant load-holding security independent of the hydraulic system. Each lock position operates automatically as the platform reaches critical height intervals, creating a failsafe against unexpected pressure loss or operator error.
Industry challenges with single-point restraints include catastrophic load drops when hydraulic seals fail, inadequate spacing for precise component alignment, and vulnerability to shock loads during removal operations. Multi-position mechanical locks address these risks by distributing the total lifting range into discrete, verifiable hold points.
This eliminates uncontrolled descents by providing automatic safety engagement every 8 inches throughout the full height range, enabling technicians to safely position components at intermediate heights during removal and installation without maintaining continuous foot pedal pressure.
Split Sliding Top Platform for Precision Positioning
The LT33A's platform incorporates a split sliding top design that separates at the center when opened, allowing technicians to position components laterally without removing them from the lift. The deck extends from 73&frac5;8" closed to 81&frac5;8" open, accommodating large assemblies like battery packs and transmission cases.
Traditional stationary platforms require full component extraction to relocate laterally, creating safety risks when moving heavy assemblies manually. EV battery service demands precise horizontal positioning to align connectors and terminal blocks before removal, and transmission service requires fine adjustments to engine-to-transmission spacing during installation.
This enables technicians to adjust component position by sliding the platform halves, improving alignment accuracy for critical electrical connections and reducing manual handling effort during assembly operations.
Configurable Working Height with Caster Options
Standard casters deliver a height range from 26¼" collapsed to 67&frac3;8;" raised, accommodating work from floor level to chest-height positioning. Optional 8" lift casters extend the maximum height to 69&frac3;8;", enabling taller shop technicians to access components at optimal ergonomic heights.
One-size-fits-all lift tables force shops to choose between ergonomic positioning for tall technicians or access to low-height work, limiting facility workflow flexibility. Service bays with mixed team heights or diverse component types (low-clearance battery work and high-elevation transmission service) struggle with single-configuration tables.
This allows shops to customize working height by caster selection, reducing technician fatigue during extended service operations and improving safety through better component visibility and reach control.
Compact Footprint for Shop Space Efficiency
The LT33A occupies only 36¼" wide × 97&frac3;8;" long overall, fitting into standard service bay layouts and drive-thru bays without extensive facility modifications. The 1,300 lb unit weight remains mobile on standard shop floors, enabling repositioning between bays as workload demands shift.
Oversized lift tables consume valuable shop real estate, limiting multi-station workflows and restricting the number of simultaneous jobs. Large footprints prevent flexible bay reconfiguration when service focus shifts between engine work, battery service, and suspension components.
This maintains shop flexibility by occupying minimal floor space while delivering the 3,300 lb capacity required for heavy EV battery and drivetrain work, allowing technicians to configure bay layouts based on seasonal demand without removing equipment.
Applications & Use Cases
- EV & Hybrid Battery Service: Safe removal, installation, and component positioning for high-voltage battery packs requiring precision alignment and connector access during diagnostic and replacement work.
- Engine & Transmission Service: Controlled lifting and positioning of complete engine and transmission assemblies during removal, rebuild support, and installation operations in collision and service facilities.
- Drivetrain & Suspension Work: Heavy component handling for axles, differential assemblies, suspension subframes, and other drivetrain components exceeding 2,000 lbs requiring stable positioning during service.
- Fleet Maintenance Operations: High-capacity lift table for commercial fleet repair facilities managing repetitive battery replacements, scheduled drivetrain service, and component-level diagnostics across multiple vehicle types.
- Collision Repair Facilities: Component damage assessment and replacement workflow requiring safe positioning of batteries, drivetrains, and suspension systems with precision height adjustment for installer access.
Technical Specifications
| Specification | Value |
|---|---|
| Maximum Capacity | 3,300 lb (1,500 kg) |
| Minimum Height (Collapsed) | 26¼" (667 mm) |
| Maximum Height (Standard Casters) | 67&frac3;8;" (1,711 mm) |
| Maximum Height (Optional 8" Casters) | 69&frac3;8;" (1,762 mm) |
| Height Adjustment Range | Continuous via foot pedal control |
| Mechanical Safety Lock Positions | 9 positions across lift range |
| Specification | Value |
|---|---|
| Platform Width | 31&frac7;8;" (810 mm) |
| Deck Length (Closed) | 73&frac5;8;" (1,870 mm) |
| Deck Length (Open) | 81&frac5;8;" (2,073 mm) |
| Overall Width | 36¼" (921 mm) |
| Overall Length | 97&frac3;8;" (2,472 mm) |
| Approximate Weight | 1,300 lb (590 kg) |
| Specification | Value |
|---|---|
| Operating Pressure | 90–120 psi (6.2–8.3 bar) |
| Power Source | Regulated compressed air supply (no electric power required) |
| Pump Type | Air-over-hydraulic pump |
| Control Method | Floor-mounted foot pedal |
| Mobility | 4 swivel casters; optional 8" height upgrade available |
Installation Requirements
Foundation & Positioning
- Floor Surface: Flat, level shop floor. Uneven surfaces exceeding 1/8" deviation over 10 feet will cause platform tilting and uneven load distribution.
- Load Distribution: Casters designed for hard shop floors (concrete, epoxy, tile). Carpet or cushioned floors will affect caster performance and load stability.
- Clearance: Minimum 8 feet of overhead clearance above the fully raised platform (9 feet recommended for component installation operations).
- Work Space: 4 feet minimum clearance on all sides for caster operation and component positioning around the lift table.
Compressed Air Requirements
- Air Supply Pressure: Regulated to 90–120 psi. Higher pressures risk component damage; lower pressures reduce lifting speed.
- Air Quality: Supply must include adequate filtration (5-micron minimum) and moisture removal to prevent pump corrosion. Unfiltered shop air will degrade hydraulic system performance within weeks.
- Connection: Standard 1/4" NPT connection to shop air manifold. No dedicated air line isolation required.
- Compliance: Verify shop compressed air system meets ANSI/ASABE safety standards for stationary air systems.
Installation Notes
- Assembly: LT33A arrives pre-assembled. Placement on shop floor is the only installation step required.
- Safety Locks: Inspect all 9 mechanical locking positions before first use to ensure smooth engagement across the full height range.
- Permits: Verify local OSHA and shop safety regulations; some jurisdictions require documentation of equipment capacity and regular maintenance schedules for lifting equipment.
Shipping & Delivery
Freight Coverage
Shipping: Standard freight delivery included to business addresses in the 48 contiguous United States. Surcharges apply for Alaska, Hawaii, rural addresses, and residential delivery.
Delivery Timeframe: Approximately 10–14 business days from order placement (subject to inventory availability and regional freight schedules).
Delivery Requirements
Equipment Needed: Forklift with 4,000 lb minimum capacity or loading dock with pallet jack access. The LT33A ships on a single standard pallet (approximately 48" × 40" × 50").
Delivery Type: Curbside or dock delivery standard. Inside delivery to service bay available for additional freight charges (contact sales for quote).
Receiving: Inspect the pallet and crate exterior before accepting delivery. Note any visible damage or dents on the bill of lading before the driver departs; concealed damage claims must be filed within 24 hours of delivery.
Damage Reporting Protocol
Within 3 Days: Full replacement of damaged components and freight cost covered by manufacturer if damage is reported with photographic evidence and original shipping documentation.
Within 30 Days: Replacement parts and freight costs shared 50/50 between customer and manufacturer.
After 30 Days: Customer responsible for parts and freight costs.
Warranty Coverage
Standard Manufacturer Warranty
Coverage Duration & Terms: Manufacturer warranty covers structural integrity and mechanical component defects. Specific duration and coverage scope vary by authorized dealer and may include tiered coverage for hydraulic components and seals.
Registration: Product registration may be required within 30 days of purchase to activate full warranty coverage (confirm with your dealer).
Installation & Maintenance: Warranty validity requires installation on a flat, level shop floor and regular maintenance per manufacturer guidelines (filter inspection, hydraulic fluid checks, caster inspection).
Ready to Upgrade Your Shop?
Get expert guidance on lift table selection, installation planning, and technical specifications for your specific application. Our team can help confirm included accessories and verify compatibility with your facility requirements.
Frequently Asked Questions
What is the maximum lifting capacity of the Rotary LT33A?
The LT33A has a rated capacity of 3,300 lbs (1,500 kg), designed for heavy EV battery packs, complete engine and transmission assemblies, and large drivetrain components. Ensure load weight is verified before lifting and that loads are evenly distributed across the platform surface.
What are the height range specifications for the LT33A?
The standard LT33A ranges from 26 1/4 inches (collapsed) to 67 3/8 inches (raised) with standard casters. Optional 8-inch lift casters extend the maximum height to 69 3/8 inches. Height is controlled continuously via foot pedal, and the table can be locked at any of 9 mechanical safety positions distributed across the lifting range.
Does the Rotary LT33A require electrical power?
No. The LT33A operates entirely on regulated compressed air (90–120 psi) through standard shop air systems. It features an air-over-hydraulic pump controlled by a foot pedal, eliminating the need for electric motors, dedicated circuits, or battery backup. This makes it ideal for facilities with power constraints or shops requiring continuous operation during outages.
What compressed air specifications does the LT33A require?
The LT33A requires regulated compressed air at 90–120 psi with 5-micron filtration and moisture removal. Connection uses a standard 1/4-inch NPT fitting to your shop air manifold. Higher pressures risk component damage; lower pressures reduce lifting speed. Unfiltered shop air will degrade the hydraulic system within weeks, so verify your shop air supply includes adequate filtration before installation.
What is included with the Rotary LT33A lift table?
The LT33A arrives pre-assembled and includes the scissor lift base, platform with split sliding top design, foot pedal air-hydraulic control system, standard casters, and 9 mechanical safety locks. Optional accessories such as 8-inch lift casters or platform extensions vary by dealer. Call +1 (855) 498-2147 to confirm all included components before purchase.
Is the Rotary LT33A suitable for EV battery service?
Yes. The LT33A is specifically designed for EV and hybrid battery removal, installation, and component positioning work. Its 3,300 lb capacity supports large battery packs, the split sliding top platform enables precise lateral positioning for connector alignment, and 9 mechanical safety locks provide redundant load security during critical battery diagnostic and replacement operations.
What maintenance does the Rotary LT33A require?
Regular maintenance includes monthly inspection of all 9 mechanical safety lock positions for smooth engagement, quarterly checks of hydraulic fluid level and condition, and annual inspection of casters and wheel bearings. Filter your shop air supply to 5 microns minimum with moisture removal to prevent pump corrosion. Contact your dealer for detailed maintenance schedules and specific hydraulic fluid specifications for your region.
About the Brand