Ranger DST30P Wheel Balancer 12-30 Inch 150 lb
- Authorized Online Dealer direct manufacturer relationship
- No Sales Tax outside PA where applicable
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- Manufacturer Warranty included with purchase
- Questions? +1 (855) 498-2147
Ranger DST30P Wheel Balancer with Six-Second Cycle Time for Professional Shops
The Ranger DST30P is a precision wheel balancer engineered for professional automotive shops that demand fast, accurate results without the added bulk and cost of larger units. Featuring a 64-tooth magnetic transducer encoder borrowed from the flagship DST-64T, this compact balancer delivers twice the weight placement accuracy of the DST-2420 with a rapid six-second average cycle time. It handles wheels from 12" to 30" in diameter and up to 150 lb, covering cars, light trucks and SUVs. Powered by a 1.5 HP motor (110/220V, single phase) and backed by Ranger's 2-year structural / 1-year component warranty, the DST30P is a cost-effective hybrid unit built for high-volume tire service.
Ranger DST30P Features
64-Tooth Magnetic Transducer Encoder
The DST30P borrows the 64-tooth precision encoder from Ranger's flagship DST-64T and packages it into a smaller, more affordable unit. Precision-cut square teeth convert rotary position into a digital electronic signal, achieving maximum profile and top-dead-center positioning with twice the weight placement accuracy of the DST-2420. The result is less weight used per wheel and faster floor-to-floor times.
Proprietary Digital Sensor Technology
Ranger's 16-digit digital sensor processor with single-chip architecture delivers faster speed and greater accuracy than multi-chip designs. Single-chip circuit boards reduce latency, boost device throughput, consume less power and better dissipate heat. A dedicated hyper transport protocol ensures data communicates with the microprocessor at maximum speed, making the DST30P fully capable of servicing OEM and performance wheels.
Piezoelectric Quartz Load Sensors
Dual-component piezoelectric quartz load sensors and a digital rotation encoder measure longitudinal, transversal and shear effects for multi-directional force unbalance detection. These high-rigidity quartz crystal sensors offer superior stability, fatigue resistance and high-frequency detection in all three measured directions, delivering unlimited service life with your wheel balancer.
Direct-Drive Belt System
The Direct-Axis drive system uses a single belt connecting the motor and unbalance sensor, eliminating most maintenance costs over the life of the machine. This streamlined design keeps the DST30P running smoothly for years while reducing the need for costly service calls or part replacements.
Full-Tilt LED Display Panel
An extended, tower-style display panel raises the controls up and away from the work area, providing a fully adjustable viewing angle that eliminates glare. Highly visible LED rolling wheel weight displays show exact weight placement positions as the mounted wheel is rolled to top-dead-center, ensuring a more ergonomic and efficient experience for all operators.
Complete Mounting Cone Package
The DST30P includes five hardened-steel mounting cones covering hub sizes from 1.75" to 5.00", accommodating cars, light trucks and SUVs right out of the box. A rubber quick-nut bell adapter with a non-marring rear cone mount pressure cup holds wheels securely without damaging tires or rims. An optional double-sided Truck Cone Kit (5150032) extends coverage to hub sizes 4.75" - 6.75".
Ranger DST30P Applications
- Independent Tire Shops: The rapid six-second cycle time and compact footprint make the DST30P ideal for high-volume tire service operations that need fast, accurate results without consuming valuable floor space.
- General Automotive Repair Shops: Dynamic, static and 3-alloy balancing modes handle a wide variety of OEM and aftermarket wheel configurations, making this a versatile addition to any full-service repair facility.
- Dealership Service Departments: The 64-tooth encoder and piezoelectric quartz sensors deliver the precision required to properly balance factory performance and alloy wheels, meeting OEM service standards.
- Light Truck and SUV Service: With a 12" - 30" wheel diameter capacity, 150 lb max tire weight and included truck cone (4.50" - 5.00"), the DST30P handles the growing light truck and SUV market out of the box.
- Performance and Custom Wheel Shops: ALU1/ALU2 balancing modes and sub-gram accuracy (+/- 1 gram) ensure proper balancing of expensive aftermarket and performance wheel-and-tire packages.
Ranger DST30P Specifications
| Specification | Value |
|---|---|
| Cycle Time | 7 seconds (avg.) |
| Balancing Modes | Dynamic / Static / 3-Alloy |
| Balancing Speed | 260 / 320 RPM |
| Accuracy | +/- 1 gram (0.035 oz) |
| Resolution | 0.01 oz, 1.4 degrees |
| Balancing Increments | 0.25 oz (7 gram) |
| Wheel Braking | Automatic / Electronic |
| Drive System | Belt Drive |
| Specification | Value |
|---|---|
| Max. Tire Diameter | 47" (1,200 mm) |
| Max. Tire Weight | 150 lb (68 kg) |
| Wheel Diameter Capacity | 12" - 30" (304.8 mm - 672 mm) |
| Wheel Width Capacity | 4" - 15" (101.6 mm - 381 mm) |
| Cones Included | 5 Standard |
| Specification | Value |
|---|---|
| Motor | 1.5 HP, 110/220V, 50/60 Hz, 1Ph |
| Working Temperature | -5 C (27 F) to 50 C (82 F) |
| Specification | Value |
|---|---|
| Shipping Weight | 370 lb (168 kg) |
| Shipping Dimensions | 44" x 30" x 46" (1,117 mm x 762 mm x 1,168 mm) |
Ranger DST30P Installation Requirements
Electrical Requirements
Power: 1.5 HP motor, 110/220V, 50/60 Hz, single phase. Ensure the outlet matches the voltage configuration of your unit. A licensed electrician should verify the electrical supply and install a dedicated circuit if needed.
Floor Requirements
Surface: Place the DST30P on a flat, level and stable concrete floor. The unit should be positioned on solid ground free from excessive vibration, as uneven surfaces can affect balancing accuracy. Secure the balancer per the installation manual instructions.
Space Requirements
Footprint: The DST30P features a narrowed chassis designed for space-conscious shops. Allow adequate clearance around all sides of the unit for operator movement, wheel mounting and hood operation. The open-side hood design accommodates a broad range of tire shapes and sizes.
Environment
Working Temperature: -5 C (27 F) to 50 C (82 F). Install the unit in a dry, indoor environment protected from rain, excessive humidity and corrosive conditions. Exposure to moisture or contaminants may void the warranty.
What's Included with the Ranger DST30P
- Ranger DST30P wheel balancer unit (Part No. 5140154)
- Five hardened-steel mounting cones: 1.75" - 2.75", 2.75" - 3.50", 3.50" - 4.25", and truck cone 4.50" - 5.00"
- Rubber quick-nut bell adapter with non-marring rear cone mount pressure cup
- Quick-release hub nut
- Precision-machined, hardened-steel 40 mm shaft
- Built-in tape weight feeder side shelf
- High-volume top weight tray
- Side cone storage pegs
- Wheel weight starter kit: 1 bulk roll of 100 silver adhesive steel tape weights, 1 bulk roll of 100 black adhesive steel tape weights, and 1 starter box of mixed clip-on steel weights
- Installation and operation manual
Optional Accessories: Ranger Truck Cone Kit (5150032) - double-sided centering cone for hub sizes 4.75" - 6.75", recommended for balancing larger truck and SUV tires.
Not Included: Dedicated electrical circuit installation, additional adhesive or clip-on wheel weights beyond the starter kit.
Ranger DST30P Shipping and Delivery
Freight Shipping
Coverage: Free freight shipping to commercial addresses in the 48 contiguous United States. Shipping Weight: 370 lb. Shipping Dimensions: 44" x 30" x 46". International: Contact sales for a quote.
Delivery Requirements
Unloading: A forklift or loading dock is recommended due to the 370 lb shipping weight. Delivery Type: Curbside delivery standard. Inspection: Inspect all packages for damage before signing the BOL. Note any damage on the delivery receipt.
Returns
Returns accepted within 30 days of delivery. Product must be unopened in original packaging with receipt. 20% restocking fee applies. Buyer responsible for return freight costs.
Ranger DST30P Warranty
Ranger Wheel Service Equipment Warranty
Ranger stands behind the DST30P with one of the best warranties in the wheel service equipment industry, covering defects in material and workmanship from the date of purchase.
- 2 Years: Equipment structure (non-moving, permanently affixed frame and main body)
- 1 Year: Operating components
- 1 Year: Labor warranty (on-site or at factory)
- 1 Year: Free ground freight shipping on warranty parts (48 contiguous U.S.)
Requirements: Warranty applies to the original purchaser. The unit must be installed and operated in accordance with the owner's manual. Proof of purchase and maintenance records are required. Damage from misuse, neglect, incorrect voltage, improper wiring or corrosive environments is not covered. See the full warranty document for complete terms and exclusions.
Documents
Click to open in a new tab.
Questions About the Ranger DST30P?
Our equipment specialists can help with installation planning, specifications, and product selection for your shop.
Ranger DST30P FAQ
What is the maximum wheel size the DST30P can balance?
The Ranger DST30P handles wheel diameters from 12" to 30", wheel widths from 4" to 15", and a maximum tire diameter of 47". It supports tire weights up to 150 lb (68 kg), making it suitable for cars, light trucks and most SUVs.
How accurate is the DST30P compared to the DST-2420?
The DST30P is twice as accurate as the DST-2420 thanks to its 64-tooth magnetic transducer encoder, which was taken directly from the flagship DST-64T. This encoder provides more precise weight placement readouts by making it easier to achieve maximum profile and top-dead-center positioning. Accuracy is rated at +/- 1 gram (0.035 oz) with a resolution of 0.01 oz and 1.4 degrees.
What power supply does the DST30P require?
The DST30P runs on a 1.5 HP motor rated for 110/220V, 50/60 Hz, single phase power. Make sure your shop's electrical supply matches the unit's voltage configuration. A licensed electrician should verify the circuit and outlet before installation.
Can the DST30P balance truck and SUV tires?
Yes. The DST30P includes a truck cone (4.50" - 5.00") standard, allowing it to handle most light truck and SUV wheels. For larger hub sizes from 4.75" to 6.75", Ranger recommends the optional Truck Cone Kit (Part No. 5150032), which is sold separately and fits the DST30P directly.
What warranty covers the DST30P?
Ranger provides a 2-year warranty on the equipment structure (frame and main body), a 1-year warranty on operating components, 1 year of labor coverage (on-site or at factory), and 1 year of free ground freight shipping on warranty parts within the 48 contiguous U.S. The warranty covers defects in material and workmanship for the original purchaser.
What comes included with the DST30P?
The DST30P ships with five hardened-steel mounting cones (1.75" - 2.75", 2.75" - 3.50", 3.50" - 4.25", and 4.50" - 5.00"), a rubber quick-nut bell adapter, quick-release hub nut, built-in tape weight feeder shelf, top weight tray, side cone storage pegs, and a wheel weight starter kit that includes 100 silver adhesive tape weights, 100 black adhesive tape weights, and a box of mixed clip-on steel weights.
How is the DST30P shipped and delivered?
The DST30P ships via free freight to commercial addresses in the 48 contiguous United States. The shipping weight is 370 lb with dimensions of 44" x 30" x 46". Standard delivery is curbside, so a forklift or loading dock is recommended for unloading. Always inspect the shipment for damage before signing the bill of lading.
What balancing modes does the DST30P offer?
The DST30P features dynamic, static and three alloy (ALU) balancing modes standard. It simultaneously retrieves static, dynamic and ALU1/ALU2 data, identifying the correct weight placement configuration for a variety of wheel styles with the push of a button. A multi-user save function holds operator presets to increase productivity.
How does the DST30P differ from the DST-64T?
The DST30P uses the same 64-tooth magnetic transducer encoder as the DST-64T, delivering the same precision in weight placement. However, the DST30P has a smaller, narrower chassis and omits some of the digital add-ons and features found on the larger DST-64T. It is designed as a cost-effective hybrid for shops that want top-tier accuracy without the increased body size and price of the flagship model.
What maintenance does the DST30P require?
The DST30P requires minimal maintenance thanks to its Direct-Axis belt drive system, which uses a single belt connecting the motor and unbalance sensor. This eliminates most ongoing maintenance costs. Keep the unit clean, operate it within the rated working temperature range of -5 C to 50 C, and follow the maintenance schedule in the owner's manual to ensure long-term performance and warranty compliance.
Does the DST30P have automatic start and braking?
Yes. The DST30P features automatic electronic braking and offers both manual and automatic start when the hood is lowered. It also includes an automatic rolling wheel parameter setting feature and automatic round-off with a top-dead-center weight position indicator, all designed to save time and minimize operator errors.
Can I return the DST30P if it doesn't meet my needs?
Returns are accepted within 30 days of delivery. The product must be unopened in its original packaging with a receipt. A 20% restocking fee applies, and the buyer is responsible for return freight costs. Contact our team at +1 (855) 498-2147 to initiate a return.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals including styrene and vinyl chloride, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.p65warnings.ca.gov.
About the Brand