Norco 81225I 25 Ton Jack Stands Pair - 12 to 20 In Height
- Authorized Norco Industries Dealer direct manufacturer relationship
- Manufacturer Warranty included with purchase
- Expert Product & Freight Support +1 (855) 498-2147
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- No Sales Tax outside PA where applicable
NORCO 81225i 25 Ton Jack Stands (Pair) - Heavy Duty Support for Trucks and Trailers
You're not putting a passenger sedan on these. You're putting a loaded truck or trailer up in the air and climbing under it, so the stand better hold. The NORCO 81225i delivers 25 tons of capacity per stand, with a 10 x 10 inch base plate and solid steel construction that keeps the load planted while you work.
Height range runs 12 to 20 inches across four pin-adjusted positions, so you're not stuck with one setup for every job. Chamfered pins seat clean, and a tethered adjustment pin means you're not digging through a tool tray to find the one piece that makes the stand actually work. Built in the USA, sold as a pair.
Key Features & Benefits
| Maximum Load Security | Solid steel construction and a 10 x 10 inch base give you 25 tons of stable support per stand. |
| Quick Height Adjustment | Four pin positions with a tethered pin let you set the height fast and move to the next job. |
| Low Profile Design | A 12-inch minimum height and built-in handle make these easy to position under low vehicles and carry across the shop. |
Specifications
| Capacity per Stand | 25 ton (22.7 t) |
| Height Range | 12 in to 20 in (305-508 mm) |
| Height Adjustment | 4 positions, 3 in intervals |
| Base Dimensions | 10 in x 10 in (254 x 254 mm) |
| Saddle Size | 2.25 in x 3.25 in (57 x 83 mm) |
| Weight | 65 lbs (29.5 kg) each |
| Base Plate Thickness | 3/8 in (9.5 mm) solid steel |
| Country of Origin | Made in USA |
What's Included
- (2) NORCO 81225i 25 Ton Jack Stands
- Tethered adjustment pin installed on each stand
Applications
Built for the loads you see on truck and trailer repair jobs, not light-duty passenger work.
Rated for loaded trailers, making them a fit for commercial fleet maintenance programs.
Solid steel construction holds up in maintenance garages running heavy equipment.
Quick pin adjustment supports emergency repairs and scheduled fleet inspections alike.
Installation & Setup
Set these on firm, level ground that can handle the vehicle's weight before you load anything. Make sure the adjustment pins are fully seated and locked in position, then always work with both stands together so the load is distributed evenly. Chock the remaining wheels before you get under the vehicle, and double check that the vehicle's weight stays within the 25-ton per-stand limit.
Questions Before You Order?
Call us at (855) 498-2147 and we'll help you get the right setup for your shop.
Frequently Asked Questions
What vehicles can these 25 ton jack stands support?
Each stand holds up to 25 tons on its own, so as a pair they're built for trucks, loaded trailers, and other heavy commercial vehicles rather than everyday passenger cars.
How does the pin-type height adjustment work?
The column adjusts across four positions in 3-inch intervals, from 12 inches up to 20 inches. Chamfered pins seat easily, and a tethered pin stays attached to the stand so it's always within reach.
Will these fit under a low-clearance vehicle?
Yes. The minimum height is 12 inches, which is low enough for most low-clearance setups, and you can raise it in 3-inch steps up to 20 inches as needed.
Do these come as a pair, or do I need to order two?
The 81225i is sold as a matched pair. You're getting both stands you need for a proper, evenly supported lift.
How much floor space does the base take up?
Each base is 10 x 10 inches, built from 3/8-inch solid steel plate for a stable footprint under heavy loads.
About the Brand