Norco 50/25 Ton Air Hydraulic Telescopic Floor Jack
- Authorized Online Dealer direct manufacturer relationship
- No Sales Tax outside PA where applicable
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- Manufacturer Warranty included with purchase
- Questions? +1 (855) 498-2147
Norco 50 Ton Floor Jack - Air Hydraulic Power for Heavy Equipment
You're under a loaded truck, rail car, or piece of ag equipment, and you need lift you can trust without cranking a handle a hundred times. The Norco 50 / 25 Ton Capacity Air / Hydraulic Telescopic Floor Jack does the work for you. Hook up your shop air at 120 to 175 PSI and the double acting pump raises the ram fast, so you're spending less time pumping and more time working.
This is a telescoping floor jack built for the loads that break lighter tools. Two stages give you 50 tons on the first and 25 tons on the second, so a single unit covers the range from initial break to full extension. The 61.75 inch long "T" handle slides the jack under vehicles with low overhang, and the handle locking lever holds it in vertical, horizontal, or 45 degree position while you set up.
Safety is engineered in, not bolted on. The overload system keeps you inside the ASME/PASE load limiting standard and protects the cylinder from damage. A safety button at the top of the handle stops jack operation instantly in an emergency. Vacuum operated ram retraction drops the jack for you, so there's no manual lowering after the job's done. For shops that lean on hydraulic air floor jacks daily, this Norco earns its spot in the bay. Buy it here and you get a specialist on the phone who knows this equipment, not a call center, plus free freight to the lower 48.
Specifications
| Capacity | 50 Ton / 25 Ton (two stage) |
| Low Lift Height | 8.75" |
| High Lift Height | 16.5" |
| Length | 39.25" |
| Width | 8.625" |
| Piston Stroke | 7.875" |
| Handle Length | 61.75" |
| Saddle Diameter | 2-3/4" |
| PSI Range | 120-175 |
| Shipping Weight | 235 lbs |
What's Included
- Norco 50 / 25 Ton Air / Hydraulic Telescopic Floor Jack
- Removable 2-3/4" diameter saddle
- 2-9/16" long extension
- 5-7/8" long extension
- Extension holder
- 61.75" long "T" handle assembly
Applications for Heavy Duty Air Jacks
Built for heavy duty truck work where a standard shop jack runs out of capacity. The low overhang clearance gets you under tractors and trailers others can't reach.
Rail and bus maintenance operations need repeatable, high tonnage lift. This air hydraulic floor jack handles the loads those environments throw at it.
Tractors, combines, and implements demand a jack that shrugs off weight and field grime. The rust inhibitive ram coating keeps it working season after season.
Loaders, graders, and heavy machinery service calls for a telescoping floor jack with real reach and real capacity. This unit is sized for the job site.
Shipping
Free shipping to the lower 48.
Our team coordinates the freight shipment and helps manage scheduling details.
Need a delivery window, residential delivery, or liftgate service? Contact us before ordering so we can confirm the best delivery setup and any accessorial charges.
Warranty
Limited Lifetime Warranty. Norco Professional Lifting Equipment's products and parts are warranted against defects in materials and workmanship for the life of the product or the part.
This warranty is expressly limited to persons who purchase Norco products or parts for the purpose of resale or use in the ordinary course of the buyer's business. It does not cover any product or part that has been abused, misused, worn out, neglected, ground or otherwise altered, used for a purpose other than intended, or used in a manner inconsistent with the instructions. Chains, batteries, and electric motors sold with Norco products are not covered here; electric motors are separately warranted by their manufacturer.
This warranty is exclusive, and Norco makes no other warranty of any kind, express or implied, including implied warranties of merchantability or fitness for a particular purpose. If any product or part is determined by Norco to be defective, Norco will, at its option, either repair or replace it. This is the exclusive remedy for any defective product or part, and Norco is not liable for consequential or incidental damages of any kind.
Warranty registration may be required after purchase. Refer to included documentation for details.
Documents
Click to open in a new tab.
Manual
Sale Sheet
Ready to Add This to Your Bay?
Questions about fitment, capacity, or freight before you order? Talk to a specialist at (855) 498-2147.
Frequently Asked Questions
What does the 50 / 25 ton two stage rating actually mean?
This is a telescopic jack with two stages. The first stage lifts up to 50 tons for breaking the initial load, and the second stage lifts up to 25 tons as the ram extends higher. One unit covers both the heavy break and the taller reach up to 16.5 inches.
Do I need shop air to run this jack?
Yes. This is an air hydraulic floor jack that runs on shop air in the 120 to 175 PSI range. The double acting pump uses that air to raise the ram quickly, so you're not hand pumping a heavy load.
How low does it sit and how high does it lift?
Low lift height is 8.75 inches and high lift height is 16.5 inches, giving you a piston stroke of 7.875 inches. The low profile helps it slide under vehicles with limited overhang.
Will it fit under low clearance trucks and equipment?
The 61.75 inch long "T" handle is built specifically to position the jack under vehicles with low overhang, and the 8.75 inch low lift height gives you the clearance to get started under heavy trucks, rail, bus, and ag equipment.
How do I lower the jack after the job?
You don't lower it by hand. Vacuum operated ram retraction drops the jack for you, which eliminates manual lowering and speeds up teardown.
What keeps me from overloading it?
A safety overload system prevents cylinder damage and stops the jack from being used beyond the ASME/PASE load limiting standard. There's also a safety button at the top of the handle to immediately halt operation in an emergency.
What accessories come with it?
It ships with a removable 2-3/4 inch diameter saddle, a 2-9/16 inch extension, a 5-7/8 inch extension, and an extension holder, plus the 61.75 inch "T" handle assembly.
What's the warranty and how is it shipped?
It carries a Norco Limited Lifetime Warranty against defects in materials and workmanship. Shipping is free to the lower 48, and our team coordinates the freight and scheduling. The unit ships at 235 lbs, so reach out if you need a liftgate or delivery window.
About the Brand