Norco 82999 10 Ton Air Operated End Lift Jack
- Authorized Online Dealer direct manufacturer relationship
- No Sales Tax outside PA where applicable
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- Manufacturer Warranty included with purchase
- Questions? +1 (855) 498-2147
Norco 82999 Air Operated End Lift Jack
You've got a bus, a dually, or a piece of heavy construction equipment on the floor and a flat tire jack that was never built for that kind of weight. The Norco 82999 air operated end lift jack is the answer. Ten tons of capacity, running on shop air, designed to hoist the entire front or rear of a vehicle in one lift instead of you fighting two separate bottle jacks and hoping they stay put.
Push the three-way heavy duty air valve to the right and the saddles rise. Release it and it snaps to neutral. Push left and the load lowers slow and controlled. That's the whole workflow, and it gives you finer control than you'd get muscling a hydraulic pump. This air end lift jack lifts from a 12.5" low height up to a full 50", so it clears both low-profile setups and the tall clearance you need on bigger rigs.
What makes this air operated mobile end lift bumper jack worth the money is the automatic safety lock. It engages in six separate height positions completely independent of air pressure, so if a line ever bleeds off, the load stays parked on the mechanical lock, not on trapped air. Front swivel caster and two 12.25" pneumatic rear tires mean you roll it into position instead of dragging it. It's built and made in the USA. Buy it from us with free shipping to the lower 48 and a real person on the phone to sort out freight and setup before it ships.
Specifications
| Capacity | 10 Ton |
| Min Height | 12.5" |
| Max Height | 50" |
| Saddle Reach | 14.75" |
| Length | 40.5" |
| Width | 35.5" |
| Height | 65.75" |
| Max Air Pressure | 200 p.s.i. |
| Rear Tires | 12.25" pneumatic (2) |
| Safety Lock Positions | 6 |
| Country of Origin | USA |
| Shipping Weight | 638 lbs |
What's Included
- Norco 82999 10 Ton Air Lift Jack unit
- Two extendable arms with mounting bolt and nut
- Two adjustable lifting saddles
- Setup, operating, and maintenance instructions
You supply the quick disconnect of your choice for the air valve so it matches your existing shop air line. Call to confirm included accessories if you need specifics before ordering.
Installation & Setup
Setup is fast. Install your preferred quick disconnect in the air valve, connect your shop air line, and you're ready. This is one of the few air operated tall heavy duty lifting jacks that adapts to your starting height without extra parts.
The jack ships with the saddle risers set at the highest position on the arms. Need a lower starting lift height? Pull the saddles, remove the bolt and nut securing the arms, flip the extendable arms upside down, reinstall them, and drop the saddles back in the risers. Now you're at the lowest lift position. Do this on a hard, level surface only.
Two hard requirements before every lift: keep the load centered so both saddles carry an equal share, and extend the telescopic arms equally so weight distributes evenly. Do not exceed 200 p.s.i. input air pressure on this 10 ton model. And always follow the vehicle manufacturer's recommended lift points before raising a load.
Applications
Built for dealer service bays handling duallys, trucks, and heavy farm equipment that outclass standard floor jacks.
The ten ton capacity and air operated control suit shops servicing large construction machinery day in and day out.
End lift design raises an entire front or rear axle at once, exactly what bus fleet maintenance needs.
The 50" high lift gives you room to get under tall vehicles that a low-reaching air end lift bumper jack can't handle.
Model Comparison
The 82999 sits at the top of Norco's air lift jack family. If your work is lighter, the smaller-capacity models cover it. When you're lifting the heaviest end loads, this is the one.
| Model | Capacity | Max Air Pressure |
|---|---|---|
| 82920 / 82925 | 2-1/2 Ton | 175 p.s.i. |
| 82950 | 5 Ton | 175 p.s.i. |
| 82999 | 10 Ton | 200 p.s.i. |
Shipping
Free Shipping To Lower 48. Our team coordinates the freight shipment and helps manage scheduling details.
Need a delivery window, residential delivery, or liftgate service? Contact us before ordering so we can confirm the best delivery setup and any accessorial charges.
Warranty
This product is covered by Norco's Limited Lifetime Warranty. Norco Professional Lifting Equipment products and parts are warranted against defects in materials and workmanship for the life of the product or part. The warranty applies to buyers who purchase for resale or use in the ordinary course of business.
The warranty does not cover any product or part that has been abused, misused, worn out, neglected, altered, or used for a purpose other than intended. It also does not cover chains, batteries, or electric motors, which carry separate coverage from their own manufacturers. If a product or part is determined to be defective, the remedy is repair or replacement at Norco's option.
Warranty registration may be required after purchase. Refer to included documentation for details.
Documents
Manual
Sale Sheet
Ready to Order or Have Questions?
Talk to a specialist before you buy. Call us at (855) 498-2147 and we'll confirm fitment, freight, and setup for your shop.
Frequently Asked Questions
What kind of air supply do I need to run this jack?
You run it off standard shop air. Install a quick disconnect in the air valve and connect your shop line. The maximum input air pressure on this 10 ton model is 200 p.s.i., so make sure your compressor can deliver in that range.
How high does the 82999 lift?
It lifts from a low height of 12.5" up to a high lift height of 50". That range covers both low-profile setups and tall vehicles that need extra clearance underneath.
Can I lower the starting lift height?
Yes. The jack ships with saddle risers at the highest position, but you can flip the extendable arms upside down. Remove the saddles, the securing bolt and nut, rotate the arms, reinstall, and put the saddles back in. That puts you at the lowest lift position.
Does the safety lock hold if I lose air pressure?
Yes. The automatic safety lock engages in six different height positions completely independent of air pressure. If a line bleeds off, the load rests on the mechanical lock, not on trapped air.
What vehicles is this end lift jack designed for?
It's built for lifting the entire front or rear of heavier vehicles at truck and farm equipment dealers, heavy duty construction repair shops, and bus company garages. The 10 ton capacity handles loads that standard floor jacks can't.
How do I keep the load stable during a lift?
Center the load so both saddles carry an equal share, and extend the telescopic arms equally so weight distributes evenly. Always use the vehicle manufacturer's recommended lift points, and set jack stands rated equal to or greater than the jack's capacity before working under the vehicle.
Is it easy to move around the shop?
Yes. It rolls on a front swivel caster wheel and two 12.25" diameter pneumatic rear tires, so you position it instead of dragging it. Keep the tires at 25 p.s.i. for smooth maneuvering.
How is this jack shipped and can you help with delivery?
It ships free to the lower 48 by freight at a shipping weight of 638 lbs. Our team coordinates the shipment. If you need a delivery window, residential delivery, or liftgate service, call us before ordering so we can set it up.
What maintenance does it need?
Store it in a protected area, grease the axle and the front and sides of the center ram tube periodically, and keep the tires at 25 p.s.i. Inspect it before every use and never operate it with cracked, bent, or leaking components. Any air leak needs immediate repair by qualified pneumatic personnel.
Where is the 82999 made and is it covered by a warranty?
It's made in the USA and covered by Norco's Limited Lifetime Warranty against defects in materials and workmanship for the life of the product. Refer to your included documentation for registration details.
About the Brand