Product highlights
- 72 in Rise, 4.1 in Lowered
- Four Cylinders, Level Platforms
- Electric Lock Release, 24V Controls
Fortisky FSL-FR90 Full-Rise Scissor Lift 9,000 lb Capacity 72" Rise 220V
SKU: FSL-FR90
$4,799.00
Save 2% with ACH / Wire Payment. Call for details
Financing options available
Financing estimates are based on the product price; selected add-ons and delivery services are excluded.
Talk to a lift specialistExpert product and freight support before you order855-498-2147
- Authorized Fortisky Dealer
- Manufacturer Warrantyincluded with purchase
- Price Match Guaranteefind it lower and we will beat it
- No Sales Tax Collected Outside PAPA orders include sales tax
The Fortisky FSL-FR90 is a full-rise scissor lift: 9,000 lb of capacity and 72 in of rise, which means standing-height access to transmissions, exhaust, and the full undercarriage without the vertical columns of a post lift. Lowered, it sits at 4.1 in, low enough for most cars to drive over without ramps.
Four hydraulic cylinders share the load and keep the platforms level as weight shifts, each with an anti-surge valve against rapid descent. Locks release electrically through a 24V control circuit with a height limit switch, and control boxes at front and rear let you run it from either end.
The tradeoff versus a two post lift is honest: those reach 78-84 in where this stops at 72, but the FSL-FR90 fits under ceilings that post lifts cannot and leaves the floor clear when down. Scissor arms are Q355B manganese steel, and the whole machine runs on 220V single-phase.
Features
72 in Rise, 4.1 in Lowered
Full rise puts the vehicle at standing work height for technicians up to 6 ft, and the 4.1 in lowered profile lets low vehicles drive on without ramps. A full lift takes under 50 seconds; lowering, under 30.
Four Cylinders, Level Platforms
Four cylinders share the lifting force at 24 MPa rated pressure, keeping the platforms level under uneven loads where single-cylinder linkage designs can develop tilt. Anti-surge valves on each cylinder block rapid descent, and spreading the hydraulic stress across four components extends service life.
Electric Lock Release, 24V Controls
Safety locks release electrically, a height limit switch prevents over-travel, and everything the operator touches runs at 24V while the 220V power unit stays isolated. Front and rear control boxes mean no walking around the vehicle to run the lift. Shop air at 87-116 PSI is still required per the manufacturer's spec.
Q355B Manganese Steel Arms
The scissor arms are high-strength Q355B manganese plate with a higher yield strength than standard carbon steel, under a powder coat finish. Checkered-plate platform surfaces resist slip and self-lubricated bushings cut maintenance.
Open Center Access
The 59 x 25.6 in platforms leave the vehicle centerline open for transmission jacks and oil drains, working geometry a post lift only gives you after arm setup.
Best For
Ceiling-Restricted Shops
Where a two post lift's columns will not clear the ceiling, the FSL-FR90 delivers 72 in of rise with no structure above the vehicle.
Dealership and Customer-Facing Bays
Lowered, the lift nearly disappears into the floor line: no columns, clean sight lines, and full floor use between jobs.
General Repair
Transmission, exhaust, suspension, and drivetrain work on vehicles up to 9,000 lb, with drive-over convenience for the daily mix of cars, SUVs, and pickups.
Specifications
| Lifting Capacity | 9,000 lb |
|---|---|
| Maximum Lift Height | 72 in |
| Minimum Height | 4.1 in |
| Platform Length | 59 in |
| Platform Width | 25.6 in |
| Overall Length | 81 in |
| Overall Width | 80 in |
| Net Weight | 1,968 lb |
| Power Supply | 220V, 60Hz, single phase |
|---|---|
| Motor Power | 2.2 kW |
| Rated Oil Pressure | 24 MPa |
| Air Pressure Requirement | 87-116 PSI |
| Installation Location | Indoor use only |
| Lift Time | ≤50 seconds |
|---|---|
| Lowering Time | ≤30 seconds |
| Noise Level | ≤70 dB |
Installation Requirements
Electrical
220V, 60Hz single-phase on a dedicated circuit for the 2.2 kW motor. The transformer for the 24V control circuit is included.
Hydraulic Oil
The lift ships dry. Fill with AW32 or AW46 hydraulic oil before operation; rated system pressure is 24 MPa.
Air
Clean, dry shop air at 87-116 PSI through a standard fitting for the pneumatic components.
Floor and Location
Level concrete, minimum 4 in thickness recommended, able to carry the 1,968 lb lift plus a 9,000 lb vehicle. Indoor installation only, with clearance around the 81 x 80 in footprint. Professional installation per the manufacturer's specifications is required.
Shipping & Delivery
Warranty
Questions About This Product?
Our team can help with installation planning, freight coordination, and configuration.
Call (855) 498-2147Frequently Asked Questions
How much clearance do I get underneath?
72 in of rise from a 4.1 in lowered height, standing room for most technicians. A two post lift reaches 78-84 in, so the tallest techs may still duck; the tradeoff buys a clear floor and a lower ceiling requirement.
What are the power requirements?
220V, 60Hz single-phase for the 2.2 kW motor, a 24V operator control circuit, and 87-116 PSI shop air. The lift ships dry, so budget for AW32 or AW46 hydraulic oil at setup.
Why four cylinders instead of one?
Four cylinders distribute the lifting force so the platforms stay level under uneven loads, where single-cylinder designs leaning on mechanical linkage can develop tilt. The load spread also extends component life.
Can it be flush mounted?
The FSL-FR90 is built for above-ground surface installation; flush mounting is not part of the standard configuration.
What safety systems are on it?
Electric-release safety locks, a height limit switch against over-travel, anti-surge valves on all four cylinders, a 24V control circuit, and locking drive-on ramps.
What floor does it need?
Level indoor concrete, 4 in minimum thickness recommended, carrying the 1,968 lb lift plus up to 9,000 lb of vehicle across an 81 x 80 in footprint.
Have a question we didn't cover? Call (855) 498-2147 and our team will help.
About the Brand
Fortisky
Garage Supply Guys Frequently Asked Questions
If something's not working out, just let us know. Keep in mind that some items might have a restocking fee. Check the product page for the specifics.
No worries, we've got you covered. We can send replacement parts or arrange for a new delivery. Just make sure to inspect everything when it arrives and give us a heads up right away if something's off.
All the details are at the bottom of our site under Shipping & Return Policy. You'll find everything about returns, freight damage, and any brand-specific rules.
Most larger items like car lifts and heavy equipment ship free, but depending on the brand there might be freight costs. Smaller items almost always have shipping fees via UPS, USPS, FedEx, etc. We'll show you any extra costs before you check out.
Shipping estimates are just that: estimates, and they're not guaranteed. Weather, freight delays, and carrier issues can throw things off, especially with bigger items. If you're on a tight timeline for installation, it's smart to give yourself some wiggle room.
Yep! Once it ships, we'll email you the tracking info so you can keep tabs on your delivery and plan accordingly.
We always send tracking info once your order ships. If it's been more than five business days and you haven't heard anything, just shoot us a message at support@garagesupplyguys.com or hit us up through the Contact Us page. We'll figure out what's going on.
Make sure whatever you're buying will actually fit your space. That means checking ceiling height, floor space, power requirements, and whether freight delivery can even get to your location. Trust us, it's way easier to confirm these details upfront.
Read through the product details carefully, especially for heavy or specialized items. If you're not sure about fit, shipping, installation, or anything else, just ask. We'd rather help you get it right the first time.
You'll get a confirmation email right away once you place your order. For most items like car lifts, parts, and shop tools, we'll have them shipped out within five business days if they're in stock. This goes for all major brands and replacement parts.
We don't offer installation services ourselves, but we can put you in touch with qualified installers in your area who you can work out pricing with directly. We can also handle this for you after your purchase.
Just reach out to us after your purchase and we'll connect you with trusted installers in your area. You can negotiate pricing and scheduling directly with them, or we can help coordinate the whole process for you.
Some items can be installed by experienced DIYers, but larger equipment like car lifts typically require professional installation for safety and warranty reasons. Check the product specifications and manufacturer requirements before deciding.
Yes! We're authorized dealers for all the major brands we carry. This means you get full manufacturer warranties, genuine parts, and proper support. You can always verify our dealer status directly with the manufacturer if you'd like.
It means you're getting the real deal - genuine products with full manufacturer warranties, access to official support, and the peace of mind that comes with buying from a legitimate dealer. No gray market products or void warranties here.