ESCO 10498K 3 Ton Jack Stands with Axle and Rubber Cushion Posts

Each stand supports a static load of 3 tons, for a combined capacity of 6 tons when using the pair. The 10498K is designed for safe support of vehicles up to approximately 6,000 lbs per pair on level, solid concrete floors. Always verify your vehicle's weight and use appropriate safety practices during vehicle support.

Both posts are removable and can be easily swapped. Simply remove the pin securing your current post, lift off the post, and insert the alternate post into the stand's receiving slot. The posts are designed for quick changes so you can adapt to different vehicles and applications without tools.

Use the removable rubber-cushioned flat top post when jacking on painted frame rails, frame contact points, or hood support areas. The rubber cushion protects the finish and prevents marring. This post is ideal for modern vehicles where finish protection is a priority.

Use the curved axle saddle post when supporting rear axles, differential housings, or any rounded vehicle surfaces. The conventional curve grips these surfaces securely and prevents slipping. This post is perfect for suspension work, rear-axle service, and undercar support where rounded surfaces are available.

The 10498K features 10 adjustable height positions ranging from 13.2 inches to 21.5 inches. Height adjustments come in 0.7 inch (18 mm) and 1.4 inch (35 mm) increments, allowing precise positioning for different vehicle heights and service scenarios. Lock each position with the included pin.

Yes. The ESCO 10498K is independently tested to ASME (American Society of Mechanical Engineers) standards by an A2LA certified testing facility. This certification confirms that each unit meets or exceeds industry safety requirements for jack stand design, material strength, and load capacity verification.

The ESCO 10498K is designed for temporary vehicle support during service work, not permanent storage. For vehicles stored for extended periods (weeks to months), use permanent storage equipment like ramps or storage lifts. Using jack stands for periods longer than one service shift is not recommended.

Place the stands on level, solid concrete or asphalt flooring. The circular base pads require a firm, stable surface to distribute load evenly. Never place stands on soft ground, gravel, wooden floors, or sloped surfaces. Ensure the floor has sufficient PSI rating to support the concentrated load of the vehicle and stands combined.

The powder-coated finish requires minimal maintenance. Clean with a dry cloth after each use to remove dirt and debris. If exposed to salt water or harsh chemicals, wash with mild soap and water, then dry completely. Store stands in a dry environment to prevent rust. The coating will maintain its appearance and corrosion resistance for years with basic care.

The 10498K includes both interchangeable posts (rubber-cushioned flat top and curved axle saddle) in one stand, while the 10497 features the conventional curved axle saddle only. The 10498K offers maximum versatility for shops that need to support various vehicle types and frame styles with one product.

Never support a vehicle on a single stand. Always use both stands together at separate frame contact points to distribute load evenly and prevent tipping or vehicle collapse. A pair of stands rated at 3 tons each provides 6 tons total capacity and ensures safe, balanced support.

Each stand weighs 15 lbs (6.8 kg), for a total pair weight of 30 lbs (13.6 kg). This makes them highly portable and easy to transport between service bays or vehicles. Store them in a dry location and transport in the vehicle or on a cart. The lightweight design doesn't compromise safety - the powder-coated steel construction is engineered for strength and durability.