ESCO 10455 22 Ton Short Pin Jack Stand (Pair)

Each ESCO 10455 jack stand has a maximum capacity of 22 tons (44,000 pounds). When used as a pair, the total supporting capacity is 44 tons (88,000 pounds). This capacity is suitable for most commercial trucks, buses, and heavy vehicles. Never exceed the 22 ton per stand limit as this creates serious safety hazards. Always verify the total weight of your vehicle is distributed evenly between the two stands before supporting it.

The ESCO 10455 jack stands feature three adjustable pin positions that allow heights from a minimum of 14 inches to a maximum of 20 inches. This provides a 6-inch total adjustment range. The three pin positions allow you to select the appropriate height for different vehicles and suspension configurations. The pins are permanently tethered to prevent loss during repositioning or storage.

The ESCO 10455 is sold as a pair, meaning you receive two jack stands in every purchase. The pair includes two fully functional 22-ton capacity stands, two tethered adjustment pins, two built-in carrying handles, and complete documentation. Proper vehicle support requires using both stands simultaneously, so the pair package ensures you have everything needed for safe operations.

Each ESCO 10455 jack stand features an 11 x 11 inch solid steel base plate that is 1/4 inch thick, providing excellent stability and a low center of gravity. Each individual stand weighs 37.5 pounds (17 kg), with the complete pair weighing 75 pounds (34 kg). The solid steel base plate is designed to distribute load evenly and prevent tipping, even on slightly uneven floors typical of service bays and garages.

No, the adjustment pins on the ESCO 10455 are permanently tethered to each stand with heavy-duty straps, preventing loss or misplacement. This design eliminates the frustration and safety risk of lost pins while providing quick access for height adjustments between different vehicles. The tethering ensures pins remain with the stands for organized storage and prevents pin mix-ups in busy fleet maintenance environments.

The ESCO 10455 stands require clean, level, and solid flooring capable of supporting the full load (44 tons for a pair). Concrete, asphalt, or similar hard surfaces are appropriate. Avoid soft surfaces like dirt, gravel, or wood that could compress or shift under load. The stands should never be used on ramps, inclined surfaces, or uneven floors that could cause tipping. Always verify the floor is free of cracks, oil, or debris that could affect stability.

Yes, best practices require using a properly functioning hydraulic or pneumatic jack in addition to jack stands. The jack raises the vehicle to the desired height, while the jack stands serve as backup support. Never work under a vehicle supported only by a jack or only by stands. Always use wheel chocks to prevent accidental vehicle movement. Use blocking and supplemental safety equipment for extra protection during extended work on vehicles with complex repairs.

The ESCO 10455 stands require minimal maintenance. Periodically inspect the base plate for cracks or damage, the adjustment pins for bending or corrosion, and the tether straps for wear. Wipe away dirt, grease, or moisture that could affect stability. Do not store the stands in wet environments as this can cause rust despite the steel construction. Keep the stands clean and dry when not in use, and verify all pins are functioning freely before each use.

ESCO provides a 1-year limited manufacturer warranty covering defects in materials and workmanship under normal use conditions. This includes coverage for structural integrity, base plate welds, adjustment pin securement, and mechanical components. The warranty excludes damage from misuse, overloading beyond 22 tons per stand, lack of maintenance, or normal wear from extended service. Keep proof of purchase and contact your ESCO distributor for warranty claims or service needs.

Position each stand directly under the vehicle's structural support points or manufacturer-designated lift pads. Place one stand on each side of the vehicle at locations that provide balanced load distribution. Never position stands outside the frame or suspension mounting points as this creates tipping hazards. Always use a hydraulic jack to raise the vehicle, position the stands, and then lower the vehicle slowly onto both stands simultaneously. Verify both stands are securely seated before releasing the hydraulic jack.

No, the ESCO 10455 stands must never be used beyond their 22 ton per stand capacity rating. Overloading the stands creates serious safety hazards including structural failure, tipping, and potential injury or death. Before using the stands, determine your vehicle's total weight and verify it is appropriate for the paired capacity of 44 tons maximum. For heavier vehicles, ESCO manufactures higher-capacity stands including 50-ton models suitable for the heaviest equipment.

The ESCO 10455 is specifically sold as a pair (two stands) because proper vehicle support requires using both stands simultaneously. This ensures balanced load distribution and maximum stability. While single stands can be ordered separately for replacement purposes through ESCO distributors, the standard purchase is the pair package which includes everything needed for safe, professional-grade vehicle support.