Coats 1300 Balancer and MAXX 70 Tire Changer Combo
- Authorized Online Dealer direct manufacturer relationship
- No Sales Tax outside PA where applicable
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- Manufacturer Warranty included with purchase
- Questions? +1 (855) 498-2147
Coats Tire Changer and Balancer Combo: 1300 Balancer + MAXX 70
You're running a busy bay and you need two machines that pull their weight every day, not one workhorse and one weak link. This Coats tire changer and balancer combo pairs the 1300 2D wheel balancer with the MAXX 70 rim clamp tire changer, so you get a single buying decision that covers both halves of the job. Mount and demount on the MAXX 70, then spin and correct on the 1300. No mismatched brands, no guessing whether the two will work side by side.
The 1300 reads offset and diameter automatically through its offset arm, with manual backup on every parameter, and it spins balance results in a single dynamic-and-static pass. The MAXX 70 is a rim clamp changer built for single-piece automotive and most tubeless light truck assemblies, with a Robo-Arm and Robo-Roller that give you real leverage on runflat and low-profile tires instead of fighting them by hand. Together they make a tight, no-nonsense tire changer and balancer combo for a shop that wants Coats reliability on both stations.
If you've been comparing tire changer and balancer combos and weighing whether to buy piecemeal, this is the shortcut. One order, one freight shipment, two pieces of equipment that belong together. Buy it from Garage Supply Guys and you get direct phone support before and after the sale, plus help sourcing Coats replacement parts down the road, so you're not chasing a faceless marketplace listing when you have a question.
Specifications
Coats 1300 2D Wheel Balancer
| Wheel Diameter Range | 8 - 30 in (203 - 762 mm) |
| Wheel Width Range | 2 - 20 in (51 - 508 mm) |
| Max Outside Tire Diameter | Up to 44 in (1016 mm) |
| Max Tire/Wheel Weight | 150 lb (68 kg) |
| Shaft Diameter | 40 mm |
| Resolution (Round Off) | 0.25 oz, position 1.40 degrees |
| Resolution (Non-Round Off) | 0.01 oz, position 1.40 degrees |
| Display Increments | 0.25 or 0.01 oz |
| Electrical | 220V 1PH 60Hz 20A (NEMA L6-20R) or 220V 3PH 60Hz 20A (NEMA L15-20R) |
| Footprint | 60 in D x 60 in W (1524 mm x 1524 mm) |
| Shipping Weight | 680 lb (308 kg) with accessories |
Coats MAXX 70 Tire Changer
| Wheel Clamping (inner holes) | 6 - 22 in |
| Wheel Clamping (outer holes) | 8 - 24 in |
| Air Source (all-air models) | 14 - 15 CFM at 150 PSI |
| Air Source (air/electric models) | 5 CFM at 150 PSI |
| Operating Pressure Range | 110 - 175 PSI at the machine |
| Pressure Limiter | Set at 60 PSI |
| High Pressure Safety Valve | Exhausts above 200 PSI |
| Electrical Options | 115V 1HP 13A / 230V 1HP 10A / 220V 2HP 15A |
| Workspace Requirement | 88 in x 66 in x 72 in |
What's Included
The 1300 ships with the Basic Accessory Kit (part 85009974) so you can balance your first wheel without a separate parts order:
- Small cone
- Medium cone
- Large cone
- Light truck cone
- Rim width calipers
- Wheel weight pliers
- Hubnut handle
- Small pressure cup & rubber lip
- Cone spring
- Scraper
- Cone peg brackets
Call to confirm included accessories for the MAXX 70 tire changer.
Installation & Setup
The 1300 balancer needs to sit on a flat, solid floor, preferably concrete, level on its three feet. It runs without bolt-down installation, but it has to sit solidly or your balance readings will drift. Plan for the published footprint plus clearance above and behind so the hood can raise fully, and give yourself working room to load and remove wheels. A factory-trained Coats service technician must perform the install, setup, and initial test on the balancer, and the electrical receptacle should be installed by a qualified electrician to your state and local codes.
The MAXX 70 wants a well-lit, easy-to-clean spot away from oil and grease, with the workspace clearance noted in the specs. Match your air supply to the model you're running, and have a licensed electrician confirm the power source before plugging in. Bolting the changer to the floor is left to your safety manager based on shop conditions and local regulations.
Applications
If you're cycling cars through all day, this wheel balancer and tire changer combo keeps both the mount/demount and the balance stations Coats-built so your techs aren't switching workflows between brands.
Single-piece automotive and most tubeless light truck assemblies are the MAXX 70's bread and butter, with the 1300 handling passenger and light truck balancing right beside it.
The MAXX 70's Robo-Arm and Robo-Roller give you the leverage for runflat and low-profile tires, and the changer supports outside clamping for alloy and custom wheels.
If you've been shopping tire changer and balancer combos for sale and want one accountable supplier instead of two, this commercial tire changer and balancer combo lands as a set.
Shipping
Free shipping to the lower 48. Our team coordinates the freight shipment and helps manage scheduling details.
Need a delivery window, residential delivery, or liftgate service? Contact us before ordering so we can confirm the best delivery setup and any accessorial charges.
Warranty
Coats 1300 wheel balancer: 3 years on parts (covering the inverter, piezos, and printed circuit boards), with 1 year on the touch panel/display and all other parts, plus 6 months labor. The direct drive motor carries a 10-year warranty, pro-rated after 5 years.
Coats MAXX Series (2023) tire changer: 3 years parts and 6 months labor. Tire changer and inflation accessories carry a 1-year parts warranty with no labor warranty.
All warranties begin on the date of delivery to the first retail buyer or first use, whichever comes first, and cover defects in materials and workmanship. Wear items, regular maintenance, calibration, and failures from misuse, contaminated air, or unauthorized alterations are excluded. Warranty registration may be required after purchase. Refer to included documentation for details.
Documents
Click to open in a new tab.
Manual
Manual
Talk to Us Before You Buy
Questions about fitment, power requirements, or which configuration fits your bay? Call us at (855) 498-2147 and we'll help you sort it out before you order.
Frequently Asked Questions
What's the largest wheel this combo can handle?
The 1300 balancer takes wheel diameters from 8 to 30 inches and handles tires up to 44 inches outside diameter, with a max tire/wheel weight of 150 pounds. The MAXX 70 changer clamps 6 to 22 inches on the inner holes and 8 to 24 inches on the outer holes.
What power does each machine need?
The 1300 balancer runs on 220V, either single phase (NEMA L6-20R) or three phase (NEMA L15-20R) at 20A. The MAXX 70 has several electrical options depending on the model, including 115V 1HP, 230V 1HP, and 220V 2HP. Have a licensed electrician confirm your circuit before install.
How much air does the tire changer require?
All-air MAXX 70 models need a 14 to 15 CFM source at 150 PSI, while air/electric models need 5 CFM at 150 PSI. The operating pressure range is 110 to 175 PSI at the machine, and a built-in pressure limiter is set at 60 PSI.
Does the balancer need to be bolted to the floor?
No. The 1300 uses a no-bolt-down installation, but it must sit level and solid on its three feet on a flat concrete floor or readings will be inaccurate. A factory-trained Coats technician must perform the install and initial test.
Can it service low-profile and runflat tires?
Yes. The MAXX 70's Robo-Arm and Robo-Roller provide the extra leverage runflat and low-profile tires need, and the changer supports outside clamping for alloy and custom wheels. Only trained technicians should service expensive custom and high-performance assemblies.
How accurate is the balancer?
The 1300 resolves down to 0.01 ounce in non-round-off mode and 0.25 ounce in round-off mode, with position resolution of 1.40 degrees. It runs dynamic and static balancing in a single spin.
What's included with the balancer out of the box?
The 1300 ships with the Basic Accessory Kit (part 85009974): four cones (small, medium, large, light truck), rim width calipers, wheel weight pliers, hubnut handle, small pressure cup and rubber lip, cone spring, scraper, and cone peg brackets.
How is this delivered and what does shipping cost?
Shipping is free to the lower 48 and moves by freight. Our team coordinates the shipment and scheduling. If you need a delivery window, residential delivery, or liftgate service, contact us before ordering so we can confirm the setup and any accessorial charges.
What does the warranty cover?
The 1300 balancer carries 3 years on the inverter, piezos, and circuit boards, 1 year on the display and other parts, 6 months labor, and 10 years on the direct drive motor (pro-rated after 5 years). The MAXX Series tire changer carries 3 years parts and 6 months labor. Coverage starts at delivery or first use.
About the Brand