Popular Add-ons
CHALLENGER LIFTS SA10 Two-Post Lift, 10,000 Lbs
- Authorized Online Dealer direct manufacturer relationship
- No Sales Tax outside PA where applicable
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- Manufacturer Warranty included with purchase
- Questions? +1 (855) 498-2147
Challenger SA10 - 10,000 lb ALI Certified Two-Post Lift with Symmetric or Asymmetric Configuration
The Challenger SA10 delivers 10,000 lb lifting capacity in a clearfloor two-post design engineered for professional automotive service bays and qualified home garages. Featuring dual symmetric/asymmetric configuration options, 3-stage front arms with extended reach, and adjustable height and width dimensions, this ALI/ETL certified lift handles passenger cars, SUVs, and light trucks with precision positioning.
Key Features & Benefits
Dual Symmetric & Asymmetric Configuration
The SA10's Versymmetric technology allows installation in either true symmetric or asymmetric position at setup, eliminating the need to purchase separate lift models for different service bay requirements. This single-lift flexibility adapts to your facility's layout without compromising performance.
Asymmetric positioning provides full door swing clearance so technicians can access vehicle interiors while the lift is raised. Symmetric positioning centers heavier loads directly between the columns for maximum stability when servicing trucks and SUVs at their weight limits.
This enables shop owners to standardize on one lift model across multiple bays with different configurations. The decision is made once at installation based on your workflow needs, with no additional parts or modifications required.
3-Stage Front Arm Technology
The SA10 features 3-stage front arms paired with 2-stage rear arms, delivering an extended sweep range that exceeds typical 2-stage competitor designs. Front arms reach from 22.375 in minimum to 41.5 in maximum, while rear arms extend from 38.25 in to 59 in.
Standard two-post lifts with 2-stage arms often require repositioning the vehicle to reach all four lift points on larger trucks and SUVs. The SA10's additional arm stage provides the extra reach needed to spot vehicles accurately on the first attempt, regardless of wheelbase length.
This reduces setup time when servicing mixed vehicle types throughout the workday. Technicians can transition from compact sedans to full-size trucks without the time-consuming repositioning that interrupts workflow on shorter-reach lifts.
Adjustable Height and Width Dimensions
The SA10 offers two height settings (136.5 in or 142.5 in) and multiple width configurations ranging from 129 in to 137.5 in depending on symmetric or asymmetric setup. An optional 2-ft column extension (SA10EH2) increases overall height for facilities with higher ceilings.
Many service bays have dimensional constraints that prevent installation of fixed-dimension lifts. The SA10's adjustable architecture accommodates ceiling heights as low as 12 ft standard or 14 ft with the column extension, while width adjustability fits varying bay widths.
This enables installation in existing facilities without structural modifications. Shop owners can maximize their floor space utilization rather than leaving bays empty due to lift dimension incompatibility.
Double Telescoping Screw Pads
Standard equipment on the SA10 includes four double telescoping screw pad assemblies with height adjustment from 4.75 in to 6.875 in. This integrated adjustability handles varying vehicle ground clearances without requiring separate adapter purchases for most passenger vehicles.
Traditional single-height screw pads force shops to stock multiple adapter sets for different vehicle types. When a low-clearance sports car follows a lifted truck, technicians waste time hunting for the right adapter height or risk improper contact with the vehicle's lift points.
This eliminates adapter juggling for standard service operations. The telescoping design provides sufficient range for most passenger cars, SUVs, and light trucks, with frame engaging adapters available separately for true frame-construction vehicles.
ALI/ETL Certified Safety System
The SA10 carries ALI Certification (Automotive Lift Institute) and ETL Listing (Intertek), verified to meet ANSI/ALI ALCTV standards. The single-point mechanical lock release disengages both column locks simultaneously, while the padded overhead shut-off prevents vehicle contact with the overhead beam.
Third-party certification provides documented proof that the lift has been tested and meets established safety and performance standards. Shops operating without ALI-certified equipment may face insurance complications or liability concerns in the event of an incident.
This protects your investment with verified safety compliance. Plated arm restraints and geared arm positioning mechanisms provide corrosion resistance and secure arm placement, reducing maintenance requirements over the lift's service life.
5-Year Structural Warranty with Domestic Support
Challenger backs the SA10 with a 5-year structural warranty covering columns, arms, carriages, overhead beams, and cross beams. Functional parts including power units, cylinders, hoses, cables, and controls carry 2-year coverage, with 1-year labor coverage included.
Many competing lifts in the 10K capacity class offer only 1-year standard warranties, leaving shops exposed to parts costs shortly after installation. The SA10's extended structural coverage exceeds typical industry terms and reflects Challenger's confidence in their Louisville, Kentucky manufacturing.
This reduces long-term ownership costs with comprehensive coverage during the critical early years of operation. Domestic manufacturing since 1992 ensures parts availability and an established dealer/service network across North America for warranty support and maintenance needs.
Applications & Use Cases
- Professional Automotive Service: General maintenance, brake service, suspension work, and undercarriage inspection on passenger vehicles within 10,000 lb capacity
- Tire Service Operations: Tire rotation, balancing, and replacement with clearfloor design providing unobstructed access around the vehicle
- SUV and Light Truck Service: Full-size SUVs, crossovers, and light-duty trucks including half-ton pickups within rated capacity
- Oil Change and Fluid Service: Quick-service operations benefiting from the 74.5 in rise height and 43-second lift speed
- Exhaust System Work: Exhaust inspection, repair, and replacement with full undercarriage access in clearfloor configuration
- Qualified Home Garages: Enthusiast installations meeting concrete and ceiling height requirements for personal vehicle maintenance
Note: Frame engaging adapters (sold separately) are required when lifting vehicles with frame construction to ensure proper contact with manufacturer-specified lift points.
Technical Specifications
| Specification | Value |
|---|---|
| Lifting Capacity | 10,000 lb |
| Max Load Per Arm | 2,500 lb |
| Rise Height | 74.5 in |
| Speed of Rise | 43 seconds |
| Motor | 2 HP |
| Specification | Value |
|---|---|
| Overall Height | 136.5 in / 142.5 in |
| Overall Width | 129 in / 135 in |
| Drive-Thru Clearance | 92.75 in / 98.75 in |
| Inside Columns | 106.75 in / 112.75 in |
| Specification | Value |
|---|---|
| Overall Height | 136.5 in / 142.5 in |
| Overall Width | 131.5 in / 137.5 in |
| Drive-Thru Clearance | 88.5 in / 94.5 in |
| Inside Columns | 101.5 in / 107.5 in |
| Specification | Value |
|---|---|
| Front Arm Configuration | 3-stage |
| Rear Arm Configuration | 2-stage |
| Front Arm Reach (Min) | 22.375 in |
| Front Arm Reach (Max) | 41.5 in |
| Rear Arm Reach (Min) | 38.25 in |
| Rear Arm Reach (Max) | 59 in |
| Screw Pad Height Range | 4.75 in - 6.875 in |
| Specification | Value |
|---|---|
| Voltage | 208-230V, 60Hz, 1-Phase |
| 3-Phase Option | Available as upgrade |
| Colors Available | Red, Blue |
Installation Requirements
Concrete Foundation
- Minimum Thickness: 4 in
- Reinforcement: Steel reinforced
- Compressive Strength: 3,500 PSI minimum
- Cure Time: 28 days minimum
- Floor Level: Within 3/8 in over installation area
- Anchor Placement: No anchors within 8 in of cracks, edges, or expansion joints
Ceiling Height Requirements
- Standard Configuration: 12 ft minimum
- With 2-ft Column Extension (SA10EH2): 14 ft minimum
Service Bay Dimensions (Recommended)
- Height: 12 ft minimum
- Width: 14 ft recommended
- Depth: 24 ft recommended
Electrical Requirements
- Voltage: 208-230V, Single Phase, 60Hz
- 3-Phase Upgrade: Available
Note: Verify amperage requirements with official Challenger installation manual before installation. Consult a licensed electrician for circuit sizing and local code compliance.
Installation Notes
- Professional Installation: Installation by qualified personnel following manufacturer specifications required for warranty coverage
- Permits: Verify local code compliance and permit requirements before installation
Shipping & Delivery
Freight Information
Shipping Method: Ships via flatbed freight truck
Shipping Weight: 1,400-1,900 lb (varies by configuration)
Delivery Timeframe: Typically 12-21 business days depending on location
Coverage: Many dealers offer free shipping to continental US
Delivery Requirements
Unloading Equipment: Forklift or equivalent required - customer responsible for unloading
Liftgate Service: Not available due to product weight and dimensions
Terminal Pickup: Available as alternative option
Receiving Instructions
Inspect all packages before signing bill of lading. Note any visible damage on BOL before driver departs. Contact dealer immediately if damage is discovered during unpacking.
Warranty Coverage
5-2-1 Warranty Program
5 Years - Structural Parts: Columns, arms, carriages, overhead beams, and cross beams
2 Years - Functional Parts: Power units, cylinders, sheaves, hoses, cables, valves, and controls - exceeds typical 1-year industry standard
1 Year - Labor: Labor coverage for warranty repairs
Warranty Requirements
Registration: Product registration required within 30 days of installation
Eligibility: Valid for original purchaser only (non-transferable)
Installation: Must be installed per manufacturer specifications
Default Start Date: Warranty period begins from invoice date if not registered
Ready to Upgrade Your Shop?
Get expert guidance on the right lift for your facility. Our team can help with product selection, installation planning, and technical specifications. Call to confirm electrical amperage requirements and verify included accessories.
Frequently Asked Questions
What is the lifting capacity of the Challenger SA10?
The Challenger SA10 has a 10,000 lb lifting capacity with a maximum load of 2,500 lb per arm, which ensures balanced weight distribution across all four lift points. This capacity covers the vast majority of passenger cars, sedans, SUVs, crossovers, minivans, and half-ton pickup trucks. The 10K class is the most popular capacity range for general automotive service facilities, handling everything from compact cars to full-size SUVs without requiring a heavier-duty lift. The 74.5 in rise height provides comfortable working clearance for undercarriage access.
What is the difference between symmetric and asymmetric configuration?
Symmetric configuration centers the vehicle equally between the columns for maximum stability with heavier loads, providing 92.75-98.75 in drive-thru clearance and 106.75-112.75 in inside column width. Asymmetric configuration positions the columns so the vehicle sits forward, providing full door swing clearance for technician access to the interior while raised, with 88.5-94.5 in drive-thru clearance and 101.5-107.5 in inside column width. The asymmetric setup trades some drive-thru clearance for improved door access. You choose the configuration at installation based on your workflow needs - one lift can be set up either way.
What are the ceiling height requirements for the SA10?
The SA10 requires a minimum 12 ft ceiling height for standard installation. If you add the optional 2-ft column extension (SA10EH2), the minimum ceiling height increases to 14 ft. The lift offers two height settings - 136.5 in or 142.5 in overall height - to accommodate different bay configurations.
What are the concrete requirements for installing the SA10?
The concrete foundation must be minimum 4 in thick, steel reinforced, with 3,500 PSI minimum compressive strength. The concrete must be cured at least 28 days before installation. Floor level must be within 3/8 in across the installation area, and no anchors can be placed within 8 in of cracks, edges, or expansion joints.
What is included with the Challenger SA10?
Standard components include power and idler column weld assemblies, overhead assemblies, 2 HP power unit, two 3-stage front arm assemblies, two 2-stage rear arm assemblies, four double telescoping screw pad assemblies, synchronizer cable assemblies, hydraulic hoses, single-point mechanical lock release system, dual integrated rubber door guards, and hardware kit. Frame engaging adapters and column extensions are sold separately.
What certifications does the SA10 have?
The Challenger SA10 is ALI Certified (Automotive Lift Institute) and ETL Listed (Intertek), designed to meet ANSI/ALI ALCTV standards. ALI certification means the lift has undergone independent third-party testing for structural integrity, safety lock engagement, hydraulic system performance, and verification of the full 10,000 lb rated capacity with 2,500 lb maximum per arm. ETL listing confirms compliance with applicable safety standards through Intertek laboratory testing. These certifications matter for shop insurance coverage and liability protection - many insurers require or prefer ALI-certified equipment. Certified lifts also require annual safety inspections per ALI guidelines to maintain safe operating condition.
What is the warranty on the Challenger SA10?
The SA10 includes a 5-2-1 warranty: 5 years on structural parts (columns, arms, carriages, overhead beams, cross beams), 2 years on functional parts (power units, cylinders, hoses, cables, valves, controls), and 1 year labor coverage. Registration within 30 days of installation is required. Warranty is non-transferable and valid for original purchaser only.
Do I need frame adapters for the SA10?
Frame engaging adapters are required when lifting vehicles with frame construction (body-on-frame trucks and SUVs) to ensure proper contact with manufacturer-specified lift points. The standard double telescoping screw pads with 4.75-6.875 in height adjustment work for unibody vehicles where lift points are on pinch welds or subframes. Frame adapters provide the wider contact surface and positioning needed for true frame rails found on full-size trucks and truck-based SUVs. Frame adapter sets, GM truck footpad sets, and EV footpad kits are available as optional accessories to expand vehicle compatibility beyond the standard pad range.
About the Brand