Challenger DX77-ERK-02 Extended Ramp Kit for DX77 Scissor Lift
- Authorized Online Dealer direct manufacturer relationship
- No Sales Tax outside PA where applicable
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- Manufacturer Warranty included with purchase
- Questions? +1 (855) 498-2147
Challenger DX77-ERK-02 Extended Ramp Kit for Low-Profile Vehicle Access
The Challenger DX77-ERK-02 Extended Ramp Kit is an OEM accessory designed to expand your DX77 surface-mounted scissor lift's capability to safely service low-profile vehicles. This kit includes a set of 2 extended ramps that provide shallower approach angles and increased ground clearance for sports cars, lowered vehicles, and modern EVs. Engineered by Challenger specifically for the DX77's surface-mount configuration, the ramps integrate directly with existing mounting points - no electrical, hydraulic, or air modifications required. The kit ships via freight at approximately 250 lb with dimensions of 32" x 48" x 18" and is backed by a Challenger 90-day parts warranty.
Challenger DX77-ERK-02 Features
Low-Profile Vehicle Ramp Geometry
The DX77-ERK-02 delivers extended drive-on reach through ramp geometry engineered for vehicles with limited approach angles. The progressive loading design accommodates gradual vehicle entry rather than forcing steep climb angles that risk front-end contact or suspension compression. This enables safer loading and unloading of vehicles with under 4" ground clearance, including sports cars, lowered performance builds, and modern electric vehicles.
OEM-Engineered DX77 Integration
Designed by Challenger engineers specifically for the DX77's surface-mounted configuration, these ramps use the lift's existing structural framework and mounting points without requiring any modifications. OEM-engineered accessories maintain compliance with ALI/ETL certification and warranty terms, ensuring your DX77 stays within factory specifications while expanding its capability.
Commercial-Grade Steel Construction
Built from heavy-duty forged and formed steel components, the DX77-ERK-02 is designed for industrial service environments. The robust construction withstands repeated vehicle loading cycles and resists wear from tire contact and chemical exposure. At approximately 250 lb total kit weight, these ramps maintain original performance characteristics across years of high-volume service-center operation.
Zero-Modification Installation
The extended ramp kit is a completely passive accessory that requires no electrical work, no hydraulic modifications, and no air system changes. The ramps bolt directly onto your existing DX77 surface-mount configuration using standard lift installation procedures, eliminating operational disruption and extended downtime during the upgrade process.
Warranty-Safe Equipment Upgrade
As a Challenger-approved OEM accessory, the DX77-ERK-02 preserves your original DX77 lift warranty when installed according to manufacturer specifications. Third-party ramp alternatives introduce fitment risk and potential warranty voidance. Using approved OEM components keeps engineering certification and maintenance liability clearly tied to Challenger-backed support.
Freight-Ready Commercial Packaging
The kit ships complete with all mounting hardware via commercial freight truck. Shipping dimensions of 32" x 48" x 18" are compatible with standard forklift unloading and fit typical bay layouts and storage configurations at service centers of any size. No special receiving equipment or handling procedures are required beyond standard freight operations.
Challenger DX77-ERK-02 Applications
- Sports Car and Performance Vehicle Service: Provides the shallow approach angle needed to safely load Corvettes, Camaros, Porsches, and other low-slung performance vehicles onto the DX77 without risking front splitter or bumper contact.
- Electric Vehicle Maintenance: Accommodates the low ride height common in modern EVs like Tesla, Rivian, and Lucid models that often struggle with standard lift ramp angles due to battery pack ground clearance constraints.
- Lowered and Modified Vehicle Shops: Enables shops specializing in custom builds, stance vehicles, and aftermarket suspension modifications to service lowered vehicles that cannot clear standard-height ramp approaches.
- Dealership Service Departments: Expands DX77 versatility in mixed-vehicle dealership environments where technicians handle everything from standard sedans to low-profile sports trims without needing dedicated specialty equipment.
- High-Volume Fleet and Rental Maintenance: Supports fleet operations that service a mix of vehicle types including newer low-profile models, keeping a single DX77 station flexible enough to handle varied ground clearance requirements.
Challenger DX77-ERK-02 Specifications
| Specification | Value |
|---|---|
| Part Number | DX77-ERK-02 |
| Compatible Lift Model | Challenger DX77 (surface-mounted configuration only) |
| Kit Contents | Set of 2 extended ramps with mounting hardware |
| Installation Type | Surface-mounted configuration only; standard lift installation procedures |
| Specification | Value |
|---|---|
| Shipping Weight | 250 lb (113 kg) |
| Shipping Dimensions | 32" x 48" x 18" (0.81 m x 1.22 m x 0.46 m) |
| Specification | Value |
|---|---|
| Electrical Requirements | None (passive ramp accessory; uses existing DX77 structure) |
| Hydraulic/Air Requirements | None (passive accessory) |
| Required Base Equipment | Challenger DX77 scissor lift (surface-mounted configuration) |
Challenger DX77-ERK-02 Installation Requirements
Base Equipment Required
Lift: Challenger DX77 scissor lift in surface-mounted configuration. The DX77-ERK-02 is designed exclusively for the surface-mount DX77 and is not compatible with other lift models or configurations.
No Electrical or Hydraulic Work Needed
This is a passive ramp accessory that bolts directly onto the existing DX77 framework. No electrical connections, hydraulic line modifications, or air system changes are required. Installation uses the DX77's existing mounting points and load-bearing geometry.
Tools and Unloading
Unloading: Forklift recommended for receiving the 250 lb freight shipment. Installation: Standard hand tools and lift installation procedures apply. No specialized machinery or equipment is needed beyond what is typical for lift accessory installation.
Professional Installation
Professional installation is recommended to ensure proper alignment with DX77 mounting points. Using a Challenger-authorized installer helps maintain warranty compliance and ensures the ramps integrate correctly with your lift's structural framework.
What's Included with the Challenger DX77-ERK-02
- 2 extended ramps engineered for the DX77 surface-mount configuration
- Complete mounting hardware kit
Not Included: Challenger DX77 scissor lift (sold separately), installation labor, forklift or equipment for unloading freight delivery.
Challenger DX77-ERK-02 Shipping and Delivery
Freight Shipping
Coverage: Free freight shipping to commercial addresses in the 48 contiguous United States. Shipping Weight: 250 lb. Shipping Dimensions: 32" x 48" x 18". International: Contact sales for a quote.
Delivery Requirements
Unloading: Forklift or loading dock access recommended for the 250 lb shipment. Delivery Type: Curbside delivery standard. Inspection: Inspect all packages for damage before signing the bill of lading. Note any visible damage on the delivery receipt immediately.
Returns
Returns accepted within 30 days of delivery. Product must be unopened in original packaging with receipt. 20% restocking fee applies. Buyer responsible for return freight costs.
Challenger DX77-ERK-02 Warranty
Challenger Lifts Accessory Warranty
The DX77-ERK-02 is covered under Challenger Lifts' standard accessory warranty for the original purchaser.
- 90 Days: Functional parts coverage including repair or replacement of parts that prove defective upon inspection
Requirements: Product must be installed, used, and maintained according to Challenger's specifications. Warranty registration must be completed online at challengerlifts.com. Use of unapproved parts or accessories will void the warranty. This warranty extends only to the original purchaser and is not transferable. Warranty does not cover normal maintenance, adjustments, or damage caused by improper handling, installation, abuse, or normal wear and tear.
Documents
Click to open in a new tab.
Questions About the Challenger DX77-ERK-02?
Our equipment specialists can help with compatibility verification, installation planning, and product selection for your shop.
Challenger DX77-ERK-02 FAQ
What lifts are compatible with the DX77-ERK-02 Extended Ramp Kit?
The DX77-ERK-02 is designed exclusively for the Challenger DX77 scissor lift in its surface-mounted configuration. It is not compatible with other Challenger lift models, in-ground DX77 configurations, or third-party scissor lifts. The ramps use mounting points and geometry specific to the surface-mount DX77 platform.
What types of vehicles benefit from the extended ramps?
The extended ramps are designed for low-profile vehicles that struggle with standard lift ramp approach angles. This includes sports cars (Corvettes, Porsches, Ferraris), lowered or modified vehicles, and many modern electric vehicles (Tesla, Rivian, Lucid) that sit lower due to battery pack placement. Any vehicle with limited ground clearance under approximately 4" will benefit from the shallower approach angle these ramps provide.
Does this ramp kit require any electrical or hydraulic modifications?
No. The DX77-ERK-02 is a completely passive accessory. It bolts onto your existing DX77 surface-mount structure with no electrical connections, hydraulic line changes, or air system modifications. Installation uses standard hand tools and the DX77's existing mounting points.
Will installing the extended ramp kit void my DX77 warranty?
No. The DX77-ERK-02 is an approved OEM accessory manufactured by Challenger. When installed according to Challenger's specifications, the ramp kit maintains your DX77's original warranty coverage and ALI/ETL certification compliance. Using non-approved third-party accessories, however, can void your lift warranty.
What warranty coverage does the ramp kit itself carry?
The DX77-ERK-02 is covered under Challenger's standard accessory warranty, which provides 90 days of functional parts coverage for the original purchaser. The product must be installed and used per Challenger's specifications, and warranty registration must be completed online at challengerlifts.com.
What is included in the kit?
The kit includes a set of 2 extended ramps and all necessary mounting hardware. The Challenger DX77 scissor lift is not included and must be purchased separately. Installation labor and unloading equipment (forklift) are also not included.
How is the DX77-ERK-02 shipped and what do I need for delivery?
The kit ships via commercial freight truck with free curbside delivery to commercial addresses in the 48 contiguous United States. The total shipping weight is approximately 250 lb with dimensions of 32" x 48" x 18". A forklift or loading dock access is recommended for unloading. Inspect all packages for damage before signing the bill of lading and note any damage on the delivery receipt.
Can I install the extended ramps myself?
While the ramps use standard bolt-on installation procedures without specialized tools, professional installation is recommended to ensure proper alignment with DX77 mounting points and to maintain warranty compliance. Contact our team at +1 (855) 498-2147 if you need help locating an installer in your area.
How heavy are the extended ramps?
The complete kit has a shipping weight of approximately 250 lb, which includes the two ramps, mounting hardware, and packaging. The heavy-duty steel construction ensures durability across thousands of vehicle loading cycles in commercial service environments.
Can I use the DX77-ERK-02 with an in-ground DX77 installation?
No. The DX77-ERK-02 is engineered specifically for the DX77 in its surface-mounted configuration only. The mounting points and ramp geometry are designed for surface-mount installations and will not fit in-ground configurations. Contact our team to discuss ramp options for in-ground setups.
What is the return policy for the DX77-ERK-02?
Returns are accepted within 30 days of delivery. The product must be unopened in its original packaging with proof of purchase. A 20% restocking fee applies, and the buyer is responsible for return freight costs. Contact our team before initiating a return for specific instructions.
Are there other accessories available for the Challenger DX77?
Challenger offers a range of OEM accessories for the DX77 scissor lift platform. Contact our equipment specialists at +1 (855) 498-2147 for current accessory availability and compatibility information, or browse our Challenger Lift Accessories collection for options that fit your service needs.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals including styrene and vinyl chloride, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.p65warnings.ca.gov.
About the Brand