Challenger CLHMSC-220 Shop Crane - 2,200 Lb Capacity
- Authorized Online Dealer direct manufacturer relationship
- No Sales Tax outside PA where applicable
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- Manufacturer Warranty included with purchase
- Questions? +1 (855) 498-2147
Challenger Lifts CLHMSC-220 - 2,200 Lb Shop Crane for Professional Service Bays
When you're pulling a cast-iron V8 or yanking a diesel transmission out of a work truck, you need a shop crane that won't flinch. The Challenger Lifts CLHMSC-220 is rated to 2,200 lbs in the retracted boom position and hits a maximum hook height of 114 inches, so you're not fighting for clearance on taller vehicles or tall-cab trucks. This is a Challenger Lift built to the same standard as their two-post and four-post lifts, not a light-duty piece dressed up with a high capacity number.
Two pump configurations let you match the crane to your shop. The standard manual hydraulic model uses an MP-50 pump for smooth, controlled lifting with zero dependency on compressed air. If your bays are fully plumbed, the air-over-hydraulic -H model ties into your shop air supply and raises loads with a lever push, cutting cycle time and reducing fatigue during back-to-back engine pulls.
Three boom positions give you flex on reach versus capacity: full 2,200 lbs retracted, 1,900 lbs at center, and 1,650 lbs extended. Three leg width settings - 22, 36, and 50 inches - straddle everything from a compact car to a full-size pickup. When the bay needs to clear out, the legs fold flat for wall storage. At 540 lbs of heavy-gauge steel rolling on 6-inch polyurethane wheels, this challenger car lift accessory handles your heaviest powertrains without flex or drama.
Specifications
| Model | CLHMSC-220 / CLHMSC-220-H |
| Lifting Capacity | 2,200 lb |
| Max Hook Height | 114 in |
| Overall Length | 82 in |
| Unit Weight | 540 lb |
| Leg Width Positions | 22 in / 36 in / 50 in |
| Leg Height Clearance | 8-1/8 in |
| Boom Positions | 3 (retracted, center, extended) |
| Boom Capacity - Retracted | 2,200 lb |
| Boom Capacity - Center | 1,900 lb |
| Boom Capacity - Extended | 1,650 lb |
| Wheel Type | 6 in polyurethane |
| Pump - Standard Model | MP-50 manual hydraulic |
| Pump - H Model | Air-over-hydraulic |
| Leg Style | Folding |
| Product Type | Shop Crane |
What's Included
Call to confirm included accessories.
Installation & Setup
The CLHMSC-220 is a roll-in unit - no anchor bolts, no concrete work, no electrician. Roll it into your bay, set the leg width to match your vehicle, position the boom, and you're lifting. Three leg width settings handle the spread you need whether you're working on a compact import or a full-size commercial van.
If you order the air-over-hydraulic -H model, you'll need a compressed air supply at the crane's position. Plan your bay layout to confirm an air drop is accessible where you intend to park the crane. The standard manual hydraulic model requires no utilities - just floor space.
At 540 lbs, the crane ships on a pallet and will require a forklift or pallet jack to offload. Make sure your receiving setup can handle the weight before your freight arrives. Contact us before ordering if you need to discuss delivery logistics.
Applications
The 2,200 lb retracted capacity handles the heaviest gas and diesel engine blocks. The 114-inch hook height gives you the vertical clearance to lift clear of engine bays on taller trucks and SUVs.
Extend the boom to center or full reach to position the hook over a dropped transmission. The 1,900 and 1,650 lb extended ratings cover virtually every OEM transmission.
Subframes, transfer cases, differentials, and other heavy drivetrain components that can't be safely manhandled benefit from the crane's adjustable reach and folding leg span.
If you're running back-to-back engine jobs, the air-over-hydraulic -H model cuts pump time out of every lift cycle. Less fatigue, faster turnaround on each pull.
The standard manual hydraulic model works independently of your compressed air system. Position it anywhere on the shop floor without chasing an air drop.
The 22 to 50-inch leg spread handles compact passenger cars through full-size trucks and commercial vehicles on a single crane, no swapping equipment between jobs.
Shipping
Free shipping to the lower 48 states. The CLHMSC-220 ships via freight carrier on a pallet. Our team coordinates the freight shipment and helps manage scheduling details.
Need a delivery window, residential delivery, or liftgate service? Contact us before ordering so we can confirm the best delivery setup and any accessorial charges.
Warranty
The Challenger CLHMSC-220 falls under the CLHM Series warranty coverage: 1 year labor, 1 year functional parts, 5 years structural parts.
This warranty applies to the original purchaser only and is not transferable. Coverage requires the product to be installed, used, and maintained according to Challenger Lifts specifications. Use of unapproved parts or accessories voids the warranty. Warranty registration may be required after purchase. Refer to included documentation for details.
Warranty does not cover normal wear and tear, damage from improper use, misuse, negligence, or repairs attempted by anyone other than a Challenger Lifts authorized service representative.
Questions Before You Buy?
Our team can help you confirm the right pump configuration, discuss delivery logistics, and make sure the CLHMSC-220 is the right fit for your shop. Call us at (855) 498-2147.
Frequently Asked Questions
What is the maximum lifting capacity of the CLHMSC-220?
The CLHMSC-220 is rated to 2,200 lbs with the boom in the retracted position. Capacity decreases as you extend the boom - 1,900 lbs at the center position and 1,650 lbs at full extension. Always match your load to the boom position you're using.
What's the difference between the standard model and the -H model?
The standard CLHMSC-220 uses an MP-50 manual hydraulic pump - you pump it by hand, no air required. The CLHMSC-220-H swaps in an air-over-hydraulic pump that connects to your shop air supply and raises loads with a lever. The -H model is faster for back-to-back lifts and reduces operator fatigue, but requires a compressed air drop at the crane's location.
What hook height does the CLHMSC-220 reach?
Maximum hook height is 114 inches. That's sufficient clearance for engine removal on full-size trucks, vans, and most commercial vehicles. The spec table also references a rise height range of 114 to 125 inches depending on configuration.
Does this crane require any floor anchoring or permanent installation?
No. The CLHMSC-220 is a freestanding mobile shop crane. No anchor bolts, no concrete work, and no electrical connections on the standard model. Roll it into position, set the leg width, and start lifting. The only utility requirement is compressed air if you order the -H air-over-hydraulic model.
How wide do the legs spread, and will it straddle my vehicle?
The legs have three width settings: 22 inches, 36 inches, and 50 inches. The 50-inch setting handles full-size trucks and commercial vehicles. The narrower settings work for compact cars and tighter bay positioning. The leg height clearance is 8-1/8 inches, which clears minor floor irregularities and embedded lift tracks.
How heavy is the CLHMSC-220 and can I move it around my shop?
The crane weighs 540 lbs. It rolls on 6-inch polyurethane wheels that move smoothly across concrete shop floors. You won't be lifting it by hand, but one person can maneuver it into position once it's on a flat surface. When the job is done, the legs fold flat for compact storage against the wall.
Does the CLHMSC-220 ship for free?
Yes, free shipping applies to the lower 48 states. The crane ships freight on a pallet. If you need a delivery window, liftgate service, or residential delivery, contact us before ordering at (855) 498-2147 so we can confirm the right delivery setup and any applicable accessorial charges.
What does the warranty cover on the CLHMSC-220?
The CLHM Series warranty includes 1 year on labor, 1 year on functional parts, and 5 years on structural parts. Coverage is for the original purchaser only, requires proper installation and use per Challenger Lifts specifications, and is void if unapproved parts are used or unauthorized repairs are made. Warranty registration may be required - refer to included documentation for details.
Can I use this crane for jobs beyond engine removal?
Yes. The adjustable boom and leg spread make it useful for any heavy component handling in a service bay - transmissions, transfer cases, differentials, subframes, and other drivetrain assemblies that exceed what can be safely handled manually. The 1,650 lb extended-boom rating covers the weight range of most OEM transmissions and transfer cases.
Is this crane compatible with Challenger two-post or four-post lift bays?
The CLHMSC-220 is a standalone mobile crane, not a lift accessory. It rolls independently into any bay. The 50-inch leg spread and 8-1/8 inch leg clearance are designed to work around vehicles on the floor - it is not designed to be used while a vehicle is raised on a two-post or four-post lift simultaneously. Check your bay dimensions to confirm the crane fits your specific lift bay layout.
About the Brand
Challenger
