Challenger CL10-XP9-DPC-QC 9000 lb Two Post Automotive Lift
Challenger CL10-XP9-DPC-QC 9,000 lb QuickCycle Two-Post Lift for Express Service Bays
The Challenger CL10-XP9-DPC-QC delivers 9,000 lb lifting capacity in a drive-on pad configuration engineered for high-throughput quick-lube facilities, tire shops, and express service operations. Featuring QuickCycle hydraulic technology with 27-second rise time and 17-second descent, Dual Pendant Controls for operation from either column, and integrated flip-up ramps extending from 58 to 75 inches, this ALI/ETL certified lift handles passenger cars, SUVs, and light trucks with rapid vehicle spotting that reduces cycle time and maximizes bay productivity. The heavy-duty construction includes a 48-inch elongated carriage with oversized 5-inch pulleys and aircraft-quality 5/16-inch cable rated to 14,000+ lb breaking strength.
Challenger CL10-XP9-DPC-QC Features
QuickCycle Speed Advantage
The QuickCycle hydraulic system delivers a 27-second rise time and 17-second descent, representing 40-50% improvement over standard two-post lifts that typically require 38-60 seconds per cycle. This performance is achieved through a dedicated 3 HP motor and optimized hydraulic flow paths engineered specifically for express bay environments. In high-volume quick-lube and tire rotation operations, QuickCycle technology enables shops to serve 12-15 additional vehicles per 8-hour shift compared to standard-speed lifts, directly improving bay profitability and reducing customer wait times during rush periods.
Drive-On Pad Rapid Spotting System
Integrated drive-on pads with reinforced flip-up ramps eliminate traditional swing-arm positioning steps, featuring a low-profile 2.25-inch platform height that accommodates low-clearance vehicles without bottoming concerns. The platform extends from 58 inches to 75 inches via three flip-up ramp positions, handling compact cars to extended-cab trucks without adapter stacking or configuration changes. This reduces vehicle setup time to under 60 seconds while providing consistent, repeatable lift point engagement. Non-skip surface pads maintain traction in wet conditions, and integrated rubber door guards protect vehicle panels during positioning.
Dual Pendant Control Workflow Efficiency
Control pendants mounted on both columns enable lift operation from either side without walking around the unit, featuring identical control interfaces with raise, lower, and safety release functions accessible from left or right positions. This dual-control configuration reduces positioning time by 15-30 seconds per vehicle cycle and improves operational safety by allowing technicians to maintain visual contact with the vehicle throughout the lifting process. Particularly valuable in multi-bay facilities where technicians service adjacent bays and need immediate control access without crossing between active work areas.
Heavy-Duty Equalization Engineering
The 48-inch elongated carriage distributes load across 20% larger bearing surface compared to standard 40-inch designs, while oversized 5-inch diameter pulleys reduce cable bending stress and extend service intervals. Heavy-duty 5/16-inch cable rated to 14,000+ lb breaking strength provides 155% safety factor above the 9,000 lb working capacity, engineered from aircraft-quality steel cable construction. This enables longer service life between major component replacements and maintains smooth, balanced lifting even with asymmetric loads common to trucks and vans.
Comprehensive ALI/ETL Dual Certification
This lift carries both ALI Gold Label certification and ETL third-party validation, confirming independent testing to ANSI/ALI ALCTV and ANSI/UL 201 standards. Safety features include padded overhead shutoff that prevents vehicle damage and automatically cuts power, single-point mechanical lock release with double-clutch protection that disengages both columns simultaneously, and 19 safety lock positions for precise height control. This certification documentation supports facility inspections, insurance audits, and municipal permit requirements while protecting technicians and customers.
Complete Express Bay Accessory Package
This lift includes (8) rubber spotting blocks in two sizes - (4) 1.5-inch and (4) 3-inch heights - plus column-mounted storage caddies that organize blocks for immediate access during vehicle positioning. The package also features (4) two-position adapter blocks, integrated rubber door guards that prevent panel damage during drive-on positioning, and flip-up front and rear access ramps with reinforced construction. This represents $200-300 in accessory value included in the base configuration, eliminating accessory sourcing delays and enabling same-day operational readiness following installation.
Challenger CL10-XP9-DPC-QC Applications
- Express Service Bays and Quick-Lube Operations: High-volume oil changes, fluid services, and filter replacements requiring rapid vehicle turnover and minimal positioning time. QuickCycle technology and drive-on pads maximize daily throughput during peak hours.
- Tire Rotation and Balancing Services: Wheels-free lifting for tire removal, rotation sequences, and balancing operations on passenger cars, SUVs, and light trucks up to 9,000 lb. Drive-on pads provide consistent lift point engagement for efficient tire service.
- Brake Service and Inspection: Full undercarriage access for brake pad replacement, rotor service, caliper work, and comprehensive brake system inspections. The 19 lock positions allow technicians to work at optimal heights for different service tasks.
- General Automotive Maintenance: Routine service operations including suspension inspection, exhaust system work, and undercarriage component access on vehicles within the 9,000 lb capacity range.
- Vehicle Inspection Check Lanes: State inspection programs and safety certification facilities requiring efficient vehicle positioning and undercarriage visibility for compliance checks. ALI/ETL certification meets regulatory requirements for commercial inspection operations.
Challenger CL10-XP9-DPC-QC Specifications
| Specification | Value |
|---|---|
| Lifting Capacity | 9,000 lb |
| Cable Breaking Strength | 14,000+ lb |
| Safety Factor | 155% |
| Specification | Value |
|---|---|
| Rise Time | 27 seconds |
| Descent Time | 17 seconds |
| Lock Positions | 19 |
| Specification | Value |
|---|---|
| Platform Height | 2.25" |
| Platform Extension Range | 58" to 75" |
| Carriage Length | 48" |
| Pulley Diameter | 5" |
| Cable Diameter | 5/16" |
| Specification | Value |
|---|---|
| Motor | 3 HP |
| Controls | Dual Pendant (both columns) |
| Specification | Value |
|---|---|
| ALI Certified | Yes - Gold Label |
| ETL Listed | Yes |
| Standards | ANSI/ALI ALCTV, ANSI/UL 201 |
Challenger CL10-XP9-DPC-QC Installation Requirements
Electrical Requirements
Power: This lift requires a dedicated electrical circuit with appropriate voltage for the 3 HP motor. Verify specific voltage and phase requirements in the installation manual. A licensed electrician must install and verify the electrical supply meets all local codes and manufacturer specifications.
Concrete Foundation
Anchoring: Minimum 4-inch thick concrete with 3,000 PSI compressive strength required. Concrete must be fully cured and free of cracks, expansion joints, or voids at anchor locations. Steel reinforcement recommended for commercial installations. Anchor hardware included with lift.
Space Requirements
Platform Extension: 58" to 75". Ceiling Height: Verify adequate overhead clearance for maximum lift height plus tallest vehicle to be serviced. Allow additional clearance around columns for safe operation and technician movement. Refer to installation manual for complete dimensional requirements.
Professional Installation
Professional installation by a qualified lift technician is strongly recommended to ensure proper setup, calibration, and safety verification. Improper installation may void warranty coverage and create safety hazards. Contact Garage Supply Guys for installation service recommendations in your area.
What's Included with the Challenger CL10-XP9-DPC-QC
- Challenger CL10-XP9-DPC-QC two-post lift with drive-on pads
- Dual pendant controls (mounted on both columns)
- Flip-up front and rear access ramps with reinforced construction
- (8) Rubber spotting blocks - (4) 1.5-inch height, (4) 3-inch height
- (4) Two-position adapter blocks
- Column-mounted storage caddies for spotting blocks
- Integrated rubber door guards
- Anchor hardware kit
- Installation and operation manual
Optional Accessories: Additional spotting blocks, wheel alignment accessories, and drip trays available separately.
Not Included: Electrical wiring and installation, concrete work or foundation preparation, professional installation labor, and any required permits.
Challenger CL10-XP9-DPC-QC Shipping and Delivery
Freight Shipping
Coverage: Free freight shipping to commercial addresses in the 48 contiguous United States. Lead Time: Ships within 3-5 business days when in stock. Residential Delivery: Additional fees apply for residential addresses. International: Contact sales for international shipping quotes.
Delivery Requirements
Unloading: Forklift or loading dock required for unloading. Lift ships on a pallet and requires equipment capable of handling the shipping weight. Delivery Type: Curbside delivery is standard - driver will not unload or move product beyond truck. Inspection: Inspect all packages thoroughly for damage before signing the bill of lading. Note any visible damage on the delivery receipt and photograph all damage immediately.
Returns
Returns accepted within 30 days of delivery. Product must be unopened in original packaging with receipt. 20% restocking fee applies to all returns. Buyer is responsible for return freight costs. Damaged or defective items should be reported within 48 hours of delivery.
Challenger CL10-XP9-DPC-QC Warranty
Challenger Lifts Warranty Coverage
Challenger Lifts backs this lift with comprehensive warranty protection for professional shop use.
- 5 Years: Structural components including columns, base plates, and carriages
- 2 Years: Mechanical and hydraulic components including cylinders, cables, and pulleys
- 1 Year: Electrical components and power unit
Requirements: Warranty coverage requires proper installation according to manufacturer specifications, use within rated capacity, and adherence to recommended maintenance schedules. Commercial use covered. See warranty document for complete terms, conditions, and exclusions.
Documents
Click to open in a new tab.
Questions About the Challenger CL10-XP9-DPC-QC?
Our equipment specialists can help with installation planning, specifications, and product selection for your shop.
Challenger CL10-XP9-DPC-QC FAQ
What is the lifting capacity of the Challenger CL10-XP9-DPC-QC?
The Challenger CL10-XP9-DPC-QC has a maximum lifting capacity of 9,000 lb, making it suitable for passenger cars, SUVs, crossovers, and light trucks. The heavy-duty cable system is rated to 14,000+ lb breaking strength, providing a 155% safety factor above the working capacity.
How fast does this lift raise and lower vehicles?
The QuickCycle hydraulic technology delivers a 27-second rise time and 17-second descent, which is 40-50% faster than standard two-post lifts that typically require 38-60 seconds per cycle. This speed advantage can help high-volume shops serve 12-15 additional vehicles per 8-hour shift.
What makes the drive-on pad design better than swing-arm lifts?
Drive-on pads eliminate the need for technicians to manually position swing arms under each vehicle's lift points, reducing setup time from 2-3 minutes to under 60 seconds. The low-profile 2.25-inch platform height accommodates low-clearance vehicles, and the flip-up ramps extend from 58 to 75 inches to handle everything from compact cars to extended-cab trucks without adapter changes.
What electrical requirements does this lift need?
The lift is powered by a 3 HP motor and requires a dedicated electrical circuit. Specific voltage and phase requirements should be verified in the installation manual. A licensed electrician must install the electrical supply to ensure compliance with local codes and manufacturer specifications.
What concrete specifications are required for installation?
The lift requires a minimum 4-inch thick concrete floor with at least 3,000 PSI compressive strength. The concrete must be fully cured and free of cracks, expansion joints, or voids at anchor locations. Steel reinforcement is recommended for commercial installations to ensure long-term stability.
What certifications does this lift have?
The Challenger CL10-XP9-DPC-QC carries both ALI Gold Label certification and ETL third-party validation, confirming independent testing to ANSI/ALI ALCTV (Construction, Testing, and Validation) and ANSI/UL 201 (Garage Equipment) standards. This dual certification supports insurance requirements, OSHA compliance, and facility inspections.
What accessories are included with this lift?
The lift includes a complete accessory package: (8) rubber spotting blocks in two sizes (four 1.5-inch and four 3-inch heights), (4) two-position adapter blocks, column-mounted storage caddies, integrated rubber door guards, flip-up front and rear access ramps, and anchor hardware. This represents $200-300 in accessory value included with the lift.
How does freight shipping work for this lift?
Free freight shipping is included to commercial addresses in the 48 contiguous United States. The lift ships on a pallet and requires a forklift or loading dock for unloading. Curbside delivery is standard, meaning the driver will not unload or move the product beyond the truck. Inspect all packages for damage before signing the bill of lading.
What is the warranty coverage?
Challenger provides 5-year coverage on structural components (columns, base plates, carriages), 2-year coverage on mechanical and hydraulic components (cylinders, cables, pulleys), and 1-year coverage on electrical components and the power unit. Warranty requires proper installation and adherence to maintenance schedules.
Why are there dual pendant controls?
Dual Pendant Controls mounted on both columns allow technicians to operate the lift from either side without walking around the unit. This saves 15-30 seconds per vehicle cycle and improves safety by allowing technicians to maintain visual contact with the vehicle throughout the lifting process. It's especially valuable in multi-bay facilities where technicians work between adjacent bays.
Is professional installation required?
While not strictly required, professional installation by a qualified lift technician is strongly recommended. Proper installation ensures correct setup, calibration, and safety verification. Improper installation may void warranty coverage and create safety hazards. Contact Garage Supply Guys for installation service recommendations in your area.
How does this lift compare to standard two-post lifts?
The CL10-XP9-DPC-QC is specifically engineered for express service bays with several advantages over standard two-post lifts: 40-50% faster cycle times with QuickCycle technology, drive-on pads that eliminate swing-arm positioning, dual pendant controls for operational efficiency, and a heavy-duty 48-inch elongated carriage with oversized 5-inch pulleys for extended service life in high-throughput environments.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals including styrene and vinyl chloride, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.p65warnings.ca.gov.
About the Brand