Popular Add-ons
CHALLENGER LIFTS CL10-XP9-3-DPC-QC 9,000 lb Two-Post Lift
Challenger CL10-XP9-3-DPC-QC - 9,000 lb ALI/ETL Certified Two-Post Lift for Express Service Operations
The Challenger CL10-XP9-3-DPC-QC delivers 9,000 lb capacity in a surface-mounted two-post design, engineered for high-volume quick lube centers, tire shops, and inspection lanes. Featuring QuickCycle™ fast-lift hydraulics with 27-second rise time, drive-on express pads for rapid vehicle positioning, and Dual Pendant Control for flexible bay-side operation, this lift handles passenger cars, SUVs, and light trucks up to 9,000 lb with factory-installed 3-foot column extensions providing 176 inches total height.
Key Features & Benefits
Integrated Drive-On Express Service Architecture
Factory-integrated drive-on pads with reinforced flip-up ramps eliminate aftermarket modifications and vehicle repositioning cycles. The low-profile 2.25-inch platform height accommodates low-clearance vehicles without adapter stacking, while three platform length configurations (58", 66.5", 75") via ramp positioning handle various wheelbases without repositioning.
Traditional arm-spot asymmetric lifts require 2-3 repositioning attempts and 3-5 minutes of setup time. This drive-on pad system addresses that industry-wide challenge by providing first-try spotting accuracy for express service operations where technician movement and vehicle throughput directly impact profitability.
This reduces vehicle setup time from 3-5 minutes to under 60 seconds, enabling quicker turnaround for high-volume oil change, tire rotation, and inspection services. The flip-up locking ramps provide secure vehicle entry and exit while maintaining a clean bay floor when not in use.
QuickCycle™ Fast-Lift Productivity System
QuickCycle™ hydraulics deliver 27-second rise time and 17-second lower time, achieving complete lift cycles in 44 seconds versus 70-90 seconds for conventional hydraulic lifts. This represents a 35-40% speed improvement over standard systems, with 70-inch maximum rise height providing full working access beneath vehicles.
In quick lube and tire shop environments processing 20+ vehicles per day, slow lift cycles create bottlenecks that limit bay utilization. The fast-cycle system addresses throughput constraints by reducing pure cycle time, particularly valuable during peak morning and lunch rush periods.
This enables 1-2 additional service appointments per bay per day, saving 15-20 minutes of cumulative cycle time on 20-vehicle workloads. The improved throughput translates directly to increased revenue capacity without requiring additional bay space or equipment investment.
Dual Pendant Control with directSPOT™ Technology
Dual pendant power controls allow technicians to operate the lift from either column with unobstructed view of lift points, eliminating single-control bottlenecks common in express service workflows. The directSPOT™ system enables arm positioning while vehicles approach rather than after parking, streamlining the spotting process.
Traditional single pendant configurations force technicians to operate from one fixed position, often requiring them to walk around the vehicle to verify proper arm placement. When processing multiple vehicles per hour, these extra steps accumulate into significant time loss and increase the risk of spotting errors.
This improves workflow efficiency by allowing technicians to position controls for optimal sight lines during each operation. The flexible bay-side operation reduces unnecessary movement and enables faster, more accurate vehicle positioning for express oil change and tire service operations.
Oversized Component Durability Engineering
The 5-inch diameter pulley reduces cable stress by 25% versus standard 4-inch pulleys common in competitive designs, extending cable service life. A 48-inch elongated carriage distributes load across a longer column interface, reducing wear concentration points, while heavy-duty 5/16-inch cable provides 56% greater cross-sectional strength versus 1/4-inch cable used in economy models.
High-volume operations expose lifts to thousands of cycles per year, accelerating wear on critical components like cables, pulleys, and carriages. Standard-duty components fail prematurely under this intensive use, leading to unexpected downtime and expensive repairs during peak business periods.
This reduces maintenance frequency and extends component replacement intervals, lowering total cost of ownership for shops running 15-30 cycles per day. The fully gusseted base plate construction increases column rigidity for consistent mechanical lock engagement over the lift's operational lifetime.
Comprehensive 5-2-1 Warranty Program
The tiered warranty structure provides 5 years on structural components (columns, carriage, arms, overhead beams), 2 years on functional parts (power units, cylinders, sheaves, hoses, cables, controls), and 1 year on labor. An optional extended warranty adds 3 years to functional parts coverage for total 5-year comprehensive protection.
Typical industry warranty coverage ranges from 90 days to 1 year on functional components, exposing operators to out-of-pocket repair costs during years 2-5 when hydraulic and electrical failures commonly occur. For high-volume shops, a single hydraulic failure can cost $800-1,500 in parts and labor plus lost revenue during downtime.
This reduces total cost of ownership by extending manufacturer-backed coverage through the critical wear period when lifts accumulate 5,000-15,000 cycles. The 2-year functional parts warranty alone exceeds typical 1-year industry standards, providing enhanced protection for quick lube and tire shop operators.
Dual ALI and ETL Safety Certification
The lift meets both ALI (Automotive Lift Institute) Gold Label certification and ETL electrical safety certification, satisfying commercial insurance requirements and municipal code inspections. Safety features include single-point mechanical lock release with double clutch protection, padded overhead shutoff system with kill switch, and dual integrated rubber door guards.
Commercial insurance providers and local building inspectors require verifiable third-party certification for automotive service equipment. Lifts lacking proper certification can void insurance coverage, fail code compliance inspections, or prevent business licensing approval, particularly for new shop buildouts or expansions.
This eliminates certification-related delays during facility inspections and ensures compliance with ANSI/ALI ALCTV-2011 design standards and ANSI/ALI ALOIM-2008 operation/maintenance standards. The dual certification approach provides coverage for both industry-specific lift safety and general electrical safety requirements under a single product.
Applications & Use Cases
- Quick Lube Oil Change Services: Express bay operations requiring rapid vehicle processing for oil changes, fluid top-offs, and basic inspections on passenger cars and light trucks.
- Tire Rotation and Balancing: High-volume tire shops performing rotations, seasonal tire swaps, and balance services on vehicles up to 9,000 lb capacity.
- Brake Service and Inspection: General service facilities conducting brake pad replacement, rotor inspection, and brake system diagnostics on passenger vehicles and SUVs.
- State Inspection Lanes: Inspection facilities requiring consistent vehicle access for emissions testing, safety inspections, and undercarriage examination.
- General Automotive Maintenance: Independent repair shops handling routine maintenance services including suspension work, exhaust repair, and fluid service on passenger cars, SUVs, and light trucks within 9,000 lb capacity.
- Fleet Maintenance Facilities: Fleet service operations maintaining delivery vehicles, service trucks, and commercial passenger vehicles requiring quick turnaround times.
Technical Specifications
| Specification | Value |
|---|---|
| Lifting Capacity | 9,000 lb |
| Maximum Rise Height | 70 inches |
| QuickCycle™ Rise Time | 27 seconds |
| QuickCycle™ Lower Time | 17 seconds |
| Specification | Value |
|---|---|
| Overall Height (with 3ft Extension) | 176 inches (14'8") |
| Overall Width | 138.5 inches (11'6.5") |
| Drive-Thru Clearance | 90 inches |
| Inside of Columns | 110 inches |
| Platform (Pad) Width | 24 inches |
| Platform (Pad) Height | 2.25 inches |
| Platform Length Options | 58" / 66.5" / 75" (adjustable) |
| Width Between Platforms | 31.5 inches |
| Specification | Value |
|---|---|
| Carriage Design | 48-inch elongated |
| Cable Diameter | 5/16 inch heavy-duty |
| Pulley Diameter | 5 inches oversized |
| Column Base | Fully gusseted plate design |
| Spotting Pads | Double telescoping screw pads |
| Specification | Value |
|---|---|
| Voltage | 208-230V |
| Phase | Single Phase |
| Frequency | 60 Hz |
| Circuit Breaker | 20-30 Amp dedicated circuit |
Installation Requirements
Foundation Specifications
- Concrete Thickness: Minimum 4 inches
- Concrete Strength: Minimum 3,500 PSI
- Reinforcement: Steel reinforcement required
- Curing Time: Minimum 28 days before installation
- Floor Levelness: Within 3/8 inch over installation area
- Anchor Placement: No anchors within 8 inches of cracks, edges, or expansion joints
Electrical Requirements
- Voltage: 208-230V, single-phase, 60 Hz
- Circuit Breaker: 20-30 amp dedicated circuit
- Wiring: Must comply with NEC (National Electrical Code) and local electrical codes
Clearance Requirements
- Ceiling Height: 14'3" to 14'9" (for 3ft extension model)
- Drive-Through Width: 90 inches minimum
- Recommended Bay Width: 138.5 inches (overall width)
- Recommended Bay Depth: 24 feet
Installation Notes
- Professional Installation: Recommended for warranty validation and proper setup
- Unloading Equipment: Forklift or hoist required for safe unloading
- Installation Time: Typically 4-8 hours with 2-person crew
- Permits: Verify local code compliance and permit requirements before installation
Shipping & Delivery
Freight Coverage
Shipping: Free shipping to lower 48 contiguous United States (common dealer pattern; may vary by retailer). Surcharges may apply for Alaska, Hawaii, and rural delivery addresses.
Freight Method: LTL (Less Than Truckload) carrier
Weight: 2,000 lb
Delivery Requirements
Unloading Equipment: Customer must provide forklift, bobcat, tractor, or similar equipment with adequate capacity. Driver cannot assist with unloading.
Liftgate Service: Not available for automotive lifts due to weight and size
Delivery Type: Curbside delivery standard (freight carrier delivers to street level)
Receiving: Inspect all packages before signing bill of lading. Note any visible damage on BOL before driver departs.
Damage Reporting
Report shipping damage according to the following timeline for coverage:
- Visible Damage: Must be noted on bill of lading at time of delivery
- Concealed Damage: Report within 15-30 days of delivery (refer to dealer/manufacturer policy)
- Documentation: Photograph all damage and retain packaging materials for freight claim processing
Warranty Coverage
5-2-1 Warranty Program
5 Years - Structural Components: Carriage, columns, arms, runways, bolsters, overhead beams
2 Years - Functional Parts: Power units, cylinders, sheaves, hoses, cables, controls - exceeds typical 1-year industry standard for hydraulic and electrical components
1 Year - Labor: Labor coverage for warranty repairs including freight costs
Warranty Requirements
Registration: Product must be registered at challengerlifts.com/register-your-lift within warranty period
Eligibility: Valid for original purchaser only (non-transferable)
Installation: Installation must be performed per manufacturer specifications; professional installation recommended for warranty validation
Extended Warranty: Optional 3-year extension on functional parts available if purchased within 30 days (total 5-year comprehensive coverage)
Ready to Upgrade Your Shop?
Get expert guidance on the right lift for your facility. Our team can help with product selection, installation planning, and technical specifications. Call to confirm included accessories and installation requirements for your specific application.
Frequently Asked Questions
What is the lifting capacity and rise height of the Challenger CL10-XP9-3-DPC-QC?
The Challenger CL10-XP9-3-DPC-QC has a lifting capacity of 9,000 lb and provides 70 inches of maximum rise height, accommodating passenger cars, SUVs, and light trucks. QuickCycle™ technology delivers 27-second rise time and 17-second lower time, completing full lift cycles in 44 seconds versus 70-90 seconds for conventional lifts. This represents a 35-40% speed improvement, enabling shops to process 1-2 additional vehicles per bay per day in high-volume express service operations.
What components and accessories are included with this lift?
The lift includes (4) 1.5-inch rubber spotting blocks, (4) 3-inch rubber spotting blocks, (2) column-mounted storage caddies, (4) two-position adapter blocks, reinforced flip-up front and rear access ramps, dual pendant power controls with directSPOT™ technology, padded overhead shutoff system, dual integrated rubber door guards, single-point mechanical lock release, factory-installed 3-foot column extensions, mounting hardware, and installation/operation manual.
What are the concrete foundation requirements for installation?
Installation requires a minimum 4-inch thick concrete slab with minimum 3,500 PSI strength and steel reinforcement. The concrete must be cured for at least 28 days before installation. The floor must be level within 3/8 inch over the installation area, and no anchors can be placed within 8 inches of cracks, edges, or expansion joints.
What ceiling height is required for the 3-foot extension model?
The CL10-XP9-3-DPC-QC with factory-installed 3-foot column extensions requires 14'3" to 14'9" ceiling height. The overall height of the lift with 3-foot extensions is 176 inches (14'8"). This configuration is designed for standard commercial bay ceiling heights.
What types of vehicles and service operations is this lift designed for?
This lift is designed for passenger cars, SUVs, and light trucks up to 9,000 lb capacity. Primary applications include quick lube oil change services, tire rotation and balancing, brake service and inspection, state inspection lanes, general automotive maintenance, and fleet maintenance facilities. The drive-on express pad system is specifically engineered for high-volume express service operations.
What safety certifications does this lift have?
The Challenger CL10-XP9-3-DPC-QC is ALI (Automotive Lift Institute) Gold Label certified and ETL certified. It complies with ANSI/ALI ALCTV-2011 lift design standards and ANSI/ALI ALOIM-2008 operation and maintenance standards. Safety features include single-point mechanical lock release, padded overhead shutoff system with kill switch, and dual integrated rubber door guards.
What warranty coverage is provided with this lift?
The lift includes a 5-2-1 tiered warranty program: 5 years on structural components (columns, carriage, arms, overhead beams), 2 years on functional parts (power units, cylinders, sheaves, hoses, cables, controls), and 1 year on labor. An optional extended warranty adds 3 years to functional parts coverage. Registration at challengerlifts.com/register-your-lift is required, and the warranty is valid for the original purchaser only (non-transferable).
What are the electrical requirements for the CL10-XP9-3-DPC-QC?
The lift requires 208-230V, single-phase, 60 Hz electrical service with a 20-30 amp dedicated circuit breaker. Wiring must comply with NEC (National Electrical Code) and local electrical codes. Professional installation is recommended to ensure proper electrical setup and warranty validation.
About the Brand