Challenger 40707L Extended Ramp Kit 52" for 4115 Series
- Authorized Online Dealer direct manufacturer relationship
- No Sales Tax outside PA where applicable
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- Manufacturer Warranty included with purchase
- Questions? +1 (855) 498-2147
Challenger 40707L Extended Ramp Kit – 52-Inch Drive-Through Ramps for 4115 Series
The Challenger 40707L is a 52-inch extended ramp kit designed specifically for Challenger 4115 Series four-post lifts. These drive-through ramps provide a low-profile, extended approach that eases vehicle entry and exit, reducing approach angles and minimizing undercarriage contact during drive-on/off operations.
Key Features & Benefits
Extended 52-Inch Length for Gradual Vehicle Approach
The 40707L provides 52 inches of ramp length specifically engineered for drive-through lift operations on the 4115 Series platform. This extended length creates a low-angle incline that allows vehicles to enter and exit the lift gradually, minimizing the steep approach angles that can cause bumper contact, undercarriage damage, or suspension stress on low-profile vehicles.
Professional automotive shops and fleet maintenance facilities encounter daily challenges with vehicle entry angles on standard-length ramps. Sports cars, lowered vehicles, and modern imports with minimal ground clearance require gentler approach angles to prevent damage during lift engagement. Extended ramps address this industry-wide challenge by distributing vehicle rise across a longer distance.
This enables safer, damage-free vehicle positioning on your 4115 Series lift platform. Technicians experience smoother vehicle drive-on operations and reduced liability exposure from undercarriage contact, while vehicle owners benefit from protection of suspension components and cosmetic bumper/trim.
Anti-Skid Surface for Positive Vehicle Traction
The ramp surface features an anti-skid textured coating that provides positive, reliable traction regardless of tire condition, moisture, or debris on the ramp surface. This engineered traction surface prevents tire slippage during drive-on and drive-off cycles, maintaining vehicle control throughout the engagement and disengagement sequence.
Wet shop floors, hydraulic fluid residue, and tire wear create slippage risks on generic ramps, particularly in high-volume service facilities where environmental conditions vary. Anti-skid surface technology addresses this safety requirement by maintaining consistent grip across all operational conditions and vehicle types.
This improves operational safety by eliminating tire slippage risks during vehicle positioning. Technicians gain confidence in consistent vehicle control during every drive-on/off cycle, reducing accidents, liability claims, and vehicle repositioning delays caused by traction loss.
Low-Profile Design for Multi-Vehicle Compatibility
The 40707L ramp system is engineered with a low-profile structural design that accommodates the full spectrum of vehicles compatible with the 4115 Series platform, from compact cars to light-duty pickup trucks. The gradual slope combined with extended 52-inch length ensures that both low-clearance and standard-height vehicles can safely engage the lift without suspension compression or clearance interference.
Lift systems must balance height reach with accessibility across diverse vehicle classes. Traditional ramps often favor either compact cars or trucks, creating compromise scenarios where one vehicle class experiences steep approach angles. The 4115 Series extended ramp addresses this multi-vehicle requirement by distributing rise evenly across the full 52-inch length.
This enables a single ramp system to safely serve your facility's full vehicle lineup—from sports cars to full-size trucks—without operational compromise. Technicians work faster because vehicle positioning is simplified, and your shop eliminates the need for ramp alternatives or supplementary equipment for different vehicle classes.
OEM-Engineered Fitment for 4115 Series Integration
The 40707L is OEM-engineered specifically for the 4115 Series four-post lift platform, ensuring precision fitment and seamless integration with the lift's structural design, safety systems, and operational characteristics. This engineered compatibility eliminates the guesswork of generic ramp selection and ensures the ramp system functions as a unified extension of the lift platform.
Aftermarket or generic ramps introduce compatibility uncertainties that can compromise safety, stability, or operational performance. Professional shops and fleet facilities depend on OEM-engineered accessories to maintain warranty coverage, safety certification alignment, and predictable operational behavior across their equipment investments.
This delivers engineered confidence that the 40707L ramp system integrates seamlessly with your 4115 Series lift platform, maintains your equipment warranty protection, and provides the same reliable safety performance as the base lift system. OEM fitment eliminates compatibility concerns and supports future resale value of your lift investment.
Applications & Use Cases
- Automotive Service Shops: Vehicle maintenance, tire service, brake work, and undercarriage inspection for diverse vehicle types requiring safe drive-on/off access on four-post lifts.
- Fleet Maintenance Facilities: Commercial fleet operations managing pickup trucks, vans, and service vehicles needing expanded lift capacity with safe approach angles for multiple vehicle classes.
- Home Garage Operations: Enthusiasts and hobbyists with personal vehicle collections requiring safe lift access for DIY maintenance and restoration work on cars and trucks.
- Specialty Vehicle Service: Sports cars, lowered vehicles, and performance imports requiring low-angle approach to prevent suspension and cosmetic damage during lift engagement.
Technical Specifications
| Specification | Value |
|---|---|
| Ramp Length (Extended) | 52 inches (1,321 mm) |
| Model Number | 40707L |
| Compatible Lift Series | Challenger 4115 Series four-post lifts (drive-through configuration) |
| Ramp Surface Type | Anti-skid textured coating for traction |
| Vehicle Compatibility | Cars and trucks (full 4115 Series compatible weight range) |
| Design Type | Low-profile extended drive-through ramp |
Installation Requirements
Lift Compatibility & Mounting
- Lift Series Required: Challenger 4115 Series four-post lift in proper working condition with drive-through ramp mounting points intact
- Mounting Configuration: Ramp kit attaches to the 4115 Series lift platform using manufacturer-specified fasteners and mounting hardware
- Floor Space Clearance: Verify sufficient floor space in front of the lift for the full 52-inch extended ramp length when vehicle is positioned for drive-on
Professional Installation Recommended
- Authorized Installation: Installation by a qualified Challenger-authorized technician or service center is recommended to ensure proper fitment, fastener torque, and operational safety
- Ramp Alignment: Proper alignment verification ensures level ramp positioning and safe vehicle drive-on/off without tilt or binding
- Safety Verification: Installation procedure includes confirmation that all fasteners are secure, ramp surface is secure, and lift platform operates smoothly with ramp system installed
Installation Notes
- Fasteners: Installation requires fasteners as specified in the manufacturer installation requirements. Call to confirm included hardware.
- Manual Reference: Complete installation procedures and torque specifications are documented in the Challenger 4115 Series installation manual. Consult the manual before beginning installation.
Shipping & Delivery
Freight Shipping
Shipping Method: Ships via freight carrier due to ramp kit size and weight.
Delivery Requirements: Receiver should have ability to receive and position the ramp kit upon delivery. Unloading assistance may be required depending on receiving equipment availability.
Delivery Timeframe: Delivery timing varies by seller and freight carrier routing. Confirm delivery schedule during checkout.
Receiving & Inspection
Upon Delivery: Inspect the ramp kit shipment for any visible damage before accepting delivery. Note any damage on the bill of lading before the carrier departs to protect your freight claim rights.
Concealed Damage Reporting: Report any damage discovered after unboxing within the timeframe specified by your seller to initiate freight claim coverage.
Warranty Coverage
Limited Manufacturer Warranty
Coverage: The 40707L ramp kit is covered under Challenger Lifts' standard limited warranty covering defects in material and workmanship when registered and maintained according to manufacturer requirements.
Warranty Registration: Warranty coverage may require product registration within a specified period of purchase. Confirm registration procedures and any required documentation with your seller or Challenger Lifts directly.
Coverage Scope: Standard limited warranty typically covers manufacturing defects in materials and workmanship but excludes normal wear, misuse, unauthorized modifications, improper installation, and inadequate maintenance. Verify complete coverage scope, registration requirements, and exclusions in manufacturer documentation.
Ready to Upgrade Your 4115 Series Lift?
Verify 4115 Series compatibility, confirm floor space availability, and get expert installation guidance. Our team can help with specification confirmation, installation planning, and accessory recommendations.
Frequently Asked Questions
What is the ramp length of the 40707L?
The Challenger 40707L provides an extended ramp length of 52 inches (1,321 mm), specifically engineered for drive-through operations on the 4115 Series. This extended length creates a low-angle approach that reduces vehicle entry angle and minimizes undercarriage contact on low-profile vehicles.
Is the 40707L compatible with all four-post lifts?
No, the 40707L Extended Ramp Kit is engineered specifically for Challenger 4115 Series four-post lifts. This OEM fitment ensures proper compatibility and safe operation. Do not attempt to use this ramp kit on other lift models or manufacturers. Confirm your lift model is a 4115 Series before purchasing.
What vehicles can be safely lifted with the 40707L ramps?
The 40707L ramps accommodate all vehicles compatible with the 4115 Series lift platform, including cars, trucks, vans, and SUVs. The low-profile 52-inch extended design is particularly beneficial for low-clearance vehicles, sports cars, and lowered vehicles that require gentle approach angles. Verify your specific vehicle falls within the 4115 Series weight capacity.
What is the anti-skid surface made of?
The 40707L ramp surface features a durable anti-skid textured coating engineered to provide positive vehicle traction in all conditions. The coating maintains consistent grip on wet floors, oily surfaces, and standard shop environments without degradation or slippage, reducing tire skidding during drive-on and drive-off operations.
Can I install this ramp kit myself?
Professional or authorized Challenger-certified technician installation is strongly recommended. Proper installation requires correct fastener torque, ramp alignment verification, and safety system confirmation to ensure safe operation with your 4115 Series lift. Improper installation may compromise safety or void warranty coverage.
Does the ramp kit include all necessary installation hardware?
Installation hardware inclusion varies by seller. Some packages include all fasteners and mounting hardware; others may require ordering separately. Call +1 (855) 498-2147 to confirm exactly which hardware components are included with your specific 40707L order before purchase and installation.
What warranty coverage applies to the 40707L?
The 40707L is covered under Challenger Lifts' standard limited warranty covering manufacturing defects in materials and workmanship. Warranty may require product registration within a specified period of purchase. Confirm specific warranty terms, registration requirements, coverage duration, and claim procedures with your seller or Challenger Lifts directly.
How do I know if I have adequate floor space for the 52-inch ramps?
Measure the available floor space directly in front of your 4115 Series lift. The 52-inch extended ramp length requires that much horizontal clearance when a vehicle is positioned to drive onto the lift. Ensure the measurement accommodates the full ramp length plus the width of the vehicles you'll be servicing. Consult your installer if space is constrained.
About the Brand
Challenger
