Challenger 2PHDGUPGRADE Galvanized Arm Upgrade for CL10AV3 and CL12A 2-Post
- Authorized Online Dealer direct manufacturer relationship
- No Sales Tax outside PA where applicable
- Authorized Dealer Price Match verification required
- Fast Delivery some products may have lead times
- Manufacturer Warranty included with purchase
- Questions? +1 (855) 498-2147
Challenger 2PHDGUPGRADE Galvanized Arm Upgrade for CL10AV3 and CL12A 2-Post Lifts
Standard powder-coated lift arms take a beating in any working shop. But if your bays see road salt residue, chemical overspray, constant moisture, or heavy washdown cycles, that finish breaks down faster than you'd expect. Rust starts at the joints, spreads along the arm tubes, and before long you're looking at replacement arms or a whole new lift. The Challenger 2PHDGUPGRADE galvanized arm upgrade eliminates that problem with hot-dip galvanized steel arms that resist corrosion at a level powder coat can't match.
This is a complete front and rear arm replacement set, factory-engineered for the Challenger CL10AV3 and CL12A 2-post lifts. Hot-dip galvanizing bonds zinc metallurgically to the steel, not just on the surface but into the base metal itself. That means scratches, chips, and abrasion don't expose bare steel the way they would on a painted or powder-coated arm. The zinc layer continues to protect even where the surface gets nicked, which is exactly what happens in a busy bay where tools, wheels, and exhaust components make contact with the arms daily.
If you're ordering a new CL10AV3 or CL12A, spec the galvanized arms upfront and save yourself the headache down the road. If you're running an existing lift and the standard arms are showing wear, this is a direct OEM replacement that maintains the original lift performance, geometry, and rated capacity. Either way, you're extending the usable life of a 10,000 or 12,000 lb capacity lift with an upgrade that pays for itself in reduced maintenance and deferred replacement costs.
Specifications
| Part Number | 2PHDGUPGRADE |
| Type | Galvanized Swing Arm Upgrade Kit |
| Configuration | Complete arm replacement set (front and rear arms) |
| Material | Steel with hot-dip galvanized coating |
| Coating Type | Metallurgically bonded zinc (hot-dip galvanizing) |
| Finish | Industrial galvanized |
| Compatible Lifts | Challenger CL10AV3, Challenger CL12A |
| CL10AV3 Capacity | 10,000 lb |
| CL12A Capacity | 12,000 lb |
| Installation | OEM replacement / factory upgrade |
| Brand | Challenger Lifts (Genuine OEM) |
What's Included
Call to confirm included accessories.
Applications
Salt air accelerates corrosion on standard powder-coated arms. Hot-dip galvanized zinc coating provides long-term protection in coastal environments where moisture and salt exposure are constant.
Vehicles carrying road salt, brine, and deicing chemicals transfer that corrosive material directly to your lift arms during every service. Galvanized arms resist the salt damage that eats through standard finishes over winter seasons.
Heavy daily use means more contact, more abrasion, and more finish damage on lift arms. The metallurgically bonded zinc coating on the 2PHDGUPGRADE continues to protect even where the surface gets scratched or chipped.
Fleet bays processing government vehicles, utility trucks, and commercial vans see aggressive use cycles. Galvanized arms reduce long-term maintenance costs and extend the service life of your CL10AV3 or CL12A lift investment.
Warranty
Challenger Lifts provides a limited warranty to the original purchaser covering repair or replacement of defective parts, including reasonable labor and transportation costs. The product must be installed, used, and maintained according to Challenger's official specifications.
Coverage applies to products installed within the United States and Canada and is not transferable. Exclusions include normal wear and tear, damage from misuse or improper installation, and repairs performed by unauthorized service representatives. Use of unapproved parts or accessories voids coverage.
Warranty registration may be required after purchase. Refer to included documentation for details.
Questions Before You Buy?
Call our team at (855) 498-2147 to confirm compatibility with your specific CL10AV3 or CL12A configuration, check lead times, or get answers about the Challenger 2PHDGUPGRADE galvanized arm upgrade.
Frequently Asked Questions
Which Challenger lifts are compatible with the 2PHDGUPGRADE?
The 2PHDGUPGRADE is designed specifically for the Challenger CL10AV3 (10,000 lb Versymmetric 2-post) and the CL12A (12,000 lb heavy-duty adjustable 2-post). Confirm your exact lift model and arm configuration before ordering, as other Challenger 2-post models like the SA10, VLE10, or CL16 are not covered by this part number.
What's included in the upgrade kit?
The 2PHDGUPGRADE is a complete arm replacement set that includes both front and rear swing arms with hot-dip galvanized finish. Call us at (855) 498-2147 to confirm the full contents and any included hardware before ordering.
What makes hot-dip galvanizing better than powder coat for lift arms?
Powder coat sits on the surface of the steel. When it gets scratched or chipped, bare metal is exposed and corrosion starts. Hot-dip galvanizing bonds zinc metallurgically into the base steel, creating a coating that continues to provide sacrificial corrosion protection even where the surface is damaged. For lift arms that take daily abuse from tools, wheels, and chemical exposure, the galvanized finish significantly outlasts powder coat.
Can I retrofit the galvanized arms onto an existing CL10AV3 or CL12A?
Yes. The 2PHDGUPGRADE functions as both a factory upgrade option for new lift orders and an OEM replacement for existing CL10AV3 and CL12A lifts. The galvanized arms maintain the original lift performance, geometry, and rated capacity. They're a direct swap for the standard arms.
Will the galvanized arms change my lift's rated capacity?
No. The 2PHDGUPGRADE maintains the original rated capacity of your lift. The CL10AV3 stays at 10,000 lb and the CL12A stays at 12,000 lb. The galvanized coating changes the arm's corrosion resistance, not its structural capacity or geometry.
Do I need symmetric or asymmetric arms?
The CL10AV3 uses Versymmetric arms (capable of both symmetric and asymmetric lifting), while the CL12A uses symmetric 3-stage front and 3-stage rear arms. Confirm your lift model and arm configuration with us before ordering to ensure proper fitment.
Is this upgrade worth it if my shop isn't in a coastal area?
Corrosion doesn't require salt air. Road salt in northern climates, chemical overspray, brake fluid contact, coolant drips, and even high humidity all degrade standard powder-coated arms over time. If your shop sees heavy daily use or processes vehicles that carry corrosive residue, the galvanized upgrade extends arm life and reduces long-term maintenance regardless of geography.
Is the 2PHDGUPGRADE covered under Challenger's warranty?
Yes. Challenger Lifts provides a limited warranty to the original purchaser covering repair or replacement of defective parts. The arms must be installed and maintained according to Challenger's specifications. Coverage is not transferable. Warranty registration may be required after purchase.
About the Brand
Challenger
